Hydraulic pump

Universal Hydraulik HSSPA-3

Condition: excellent (used), functionality: fully functional, Loher creel motor 90 KW - 1500 rpm. Ppodpfeuy S Tzex Aaaop B 3. shaft diameter 80 mm.

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h weight max. 8 t Ppodpfx Aaewx R T Eeaep weight of the machine ca. 13400 kg

Condition: excellent (used), Year of manufacture: 2018 Reach: 1300 mm Payload: 10 kg Pedpswtp Tmofx Aaajpp Robot weight: 28.9 kg Repeatability: ±0.1 mm Gripper: Schunk RH 907 Force sensor joint: AXIA80-ZC22 Software for controlling the above-mentioned devices and cameras (cameras not available) Control: handheld terminal + control cabinet Table not included

Condition: good (used), Transport pallets, transport boxes Podpfxed Tx Dfj Aaaopp Manufacturer: Zarges Material :Aluminium Quantity: 12 pieces available from stock The boxes have an aluminium pallet with a plate on top as a carrier, the aluminium cover has a circumferential groove with a round seal, at each corner there are tension locks with which the lid can be securely locked on the pallet. good immediate, ready to use condition immediately available from stock

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg Ppjdspz Sf Nepfx Aaajp

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, hydraulic torque pump, torque wrench pump -Manufacturer: HAWE, hydraulic unit -Type: MP 24-H 1.77/B 5-A 1/300- -Motor: 0.55 kW / 1390 rpm / 380 V -Pressure: up to 310 bar -Flow rate: 1.73 l/min -Individual components: see photos Ppedpfx Aaoivqm Ejajp -Dimensions: 325/160/H295 mm -Weight: 19 kg

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. Ppedpjycfw Esfx Aaaep This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 710 mm -Total length: retracted 850 mm -Hole: Cylinder: Ø 40 mm Podpsft Aigjfx Aaaspp -Price: per piece -Quantity: 4 pieces -Dimensions: 850/156/H110mm -Weight: 19 kg/piece

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 006 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 3x pumps available -Price: per piece Ppjdpfxjvvic Uj Aaaop -Dimensions: 220/90/H120 mm -Weight: 5.3 kg/piece

Condition: excellent (used), In almost new condition 3mm drum for a Baader 604 separator Pjdpfx Aasxd Swtoajpp