SCREDDER FOR PLASTICS

VEM

Condition: good (used), Geared motor, electric motor, electric geared motor Kodpfx Agsh Ezffjnslt -Manufacturer: VEM, Geared motor type ZG3 KMRA 80 G 6 -Speed: 31.5 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Number: 1x motor available -Price: per piece -Dimensions: 485/205/H235 mm -Weight: 25 kg/pc.

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm Ksdpfx Ajh Di H Djgnjlt -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: good (used), Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 32 mm -Design: B5 -Protection class: IP 44 -Quantity: 1x electric motor available Kodpfect A Ipjx Agnjlt -Price: per piece -Dimensions: 450/250/H310 mm -Weight: 57 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, gear pump Manufacturer: VEM -Note: without hydraulic pump -Power: 3 kW -Speed: 1430 rpm Kjdpfjf D Tmcsx Agnolt -Design: B5 -Voltage: 220/380 V -Dimensions: 515/250/H265 mm -Weight: 39 kg

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Kedpoyh Nfusfx Agnslt Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Design: B5 Power: 15 kW Kedpewcr Urofx Agnslt Flange hole spacing: approx. 270 mm Shaft: 42 x 110 mm

Condition: good (used), Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 32 mm -Construction type: 1x B5 6x B3 -Protection class: IP 44 -Price: per piece -Quantity: 1 available -Dimensions: 450/250/H310 mm Klsdpfxockd Efs Agnjt -Weight: 57 kg

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM Klodpfx Aetqd Ndjgnet THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: new, power: 112 kW (152.28 HP), nominal power: 110.32 kW (149.99 HP), rotational speed (max.): 1,791 rpm, VEM Motors IEC/EN 60034-1 Klsdoy El Tyopfx Agnjt

Condition: used, functionality: fully functional, power: 7.5 kW (10.20 HP), protection type (IP code): IP54, VEM KPER 132 SX2 7.5 kW functionally tested Kodpsx H N Dlefx Agnslt

Condition: used, Various cantilever racks 4x rack: Dimensions: 6,125 x 2,400 x 3,000 mm Weight approx.: 8,000 kg 2x rack: Dimensions: 5,650 x 2,400 x 3,000 mm Weight approx.: 7,380 kg Static calculations available Klsdpfxsyrq Nle Agnjt !! Image 1 shows the rack in its assembled state !! ä19526

Condition: used, Year of construction: 2019, functionality: fully functional, input frequency: 50 Hz, Complete Fuel Polishing & Storage System – 130,000 L Capacity Available for immediate decommissioning from a data centre: a fully equipped fuel storage and polishing system designed for reliable diesel generator operation. Main Components: Fuel Transfer Pumps (x4) Independently controlled via front-panel PLC Operational indicators and flow meters (L/h) Filtration Units (Filtertechnik) High-efficiency diesel filtration skids Integrated monitoring and alarm panels (differential pressure, overload, emergency stop) Electrical Control Panels Manual/automatic operation modes System status and fault indicators (low flow, bypass, pre-alarm) Emergency stop functionality Underground Diesel Storage Tanks (x4) Total capacity 130,000 litres Connected via reinforced piping and fuel supply lines Fuel Pipework & Monitoring High-grade piping with safety valves and pressure sensors (Barksdale, Pyropress) Designed for safe and precise operation External Housing – Fuel Pump Room Weather-resistant metal cabin with safety signage (“Highly Flammable”) Internal insulation for added protection Kedpfx Agsw Hdg Uenolt This system is ideal for data centres, industrial facilities, or any large-scale diesel generator installations, offering high reliability, complete monitoring, and easy relocation.

Condition: used, functionality: fully functional, Various electric motors in stock Klodjx Nh S Tspfx Agnot Different renowned German manufacturers From 1 to 160 kW All electric motors function tested

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rotor length: 2190 mm Rotor circle diameter: 745 mm Rotor speed: 50 Hz: 58 rpm Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Kodpfx Ajw Tk E Ajgnjlt Hopper: included Delivery time: immediate

Condition: good (used), electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B5 -Bolt circle diameter: 300 mm Klsdpjct A Iwjfx Agnet -Hole spacing: 212 mm -Recess Ø: 250 mm -Protection rating: - -Dimensions: 475/285/H330 mm -Weight: 69 kg