Wind Turbine

Vestas V52-MK3

Condition: ready for operation (used), functionality: fully functional, Gantry crane Bollegraaf 30 tons, 32 meters span, 10 meters lifting height Ncjdjw S Ea Sopfx Abvjp

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min Ncedpewtctyofx Abvop bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

Condition: good (used), Year of construction: 1988, CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Ncsdpfx Aobu Em Aobvjp Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Ncjdsv Hx R Nspfx Abvep Length 3500 mm weight approx. 22 tons

Condition: like new (used), Year of construction: 1998, functionality: not functional, turning height: 1,900 mm, workpiece weight (max.): 15,000 kg, turning diameter: 2,630 mm, faceplate diameter: 2,500 mm, total height: 5,000 mm, total width: 4,800 mm, total length: 4,800 mm, rotary table diameter: 2,500 mm, table load: 15,000 kg, table diameter: 2,500 mm, year of last overhaul: 2025, warranty duration: 12 months, overall weight: 38,850 kg, table speed: 2,500 mm/min, SC2700 Vertical Turning Lathe 2700 with 2 Work Heads - Retrofit Completed Specifications: Retrofit status: recently upgraded (mechanical, electrical, hydraulic systems), in course to be put under power. Electric cabinet: new electric equipment, cables, portcables, covers. Main motor: original 55 kW, revised. Condition: mechanically like-new, low working hours. Ncedpfx Ajygldgsbvsp Inspection: available any time. At request, it can be overhightened for a higher workpiece, or receive an CNC upgrade. Price, install and transport on request. More technical specifications on request.

Condition: new, Year of construction: 2007, functionality: fully functional, machine/vehicle number: D5894, Grupa Azoty Zakłady Chemiczne "Police" S.A. in Police invites you to submit an offer for the sale of a fixed asset: Steam Turbine C-32154. The Steam Turbine C-32154 was manufactured by DRESSER-RAND Wellsville, NY 14895 USA and was intended for driving a carbon dioxide compressor in the urea production process. It was delivered in September 2007. The turbine has never been used or installed in the plant. Ncedpsx Eyviofx Abvep In December 2011, an inspection was carried out by Dresser-Rand service. In 2018, the turbine rotor underwent an overhaul at the Dresser-Rand Le Havre Repair Center workshop. The book value of the turbine at the time of purchase was PLN 8,783,457.93. We invite individual purchase offers.

Year of construction: 2008, condition: ready for operation (used), Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible. Njdpfeulku Hsx Abvscp

Condition: excellent (used), functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 4,000 mm, table width: 1,000 mm, CNC ECS 2301 (with the possibility of retrofitting) SPINDLE ISO 50 DIN 2080 taper AC motor: 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3.000 rpm Two automatic ranges TABLE (X-axis) Length 4.000 mm Width 1.000 mm Travel 4.000 mm Number of T-slots: 7 Width of slots: 18 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' HEAD (Y-axis RAM) Y-axis travel 1.000 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' Ncjdpfew Axmnex Abvop VERTICAL CARRIAGE (Z-axis) Z-axis travel 1.500 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' COLUMN (W-axis) W-axis travel mm 1.300 Working feed mm/1' 0 – 8.000 Rapid feed mm/1' - 15.000 ACCESSORIES: 40-position tool magazine

Condition: used, Year of construction: 2002, Technical details: x-travel: 16300 mm y-travel: 2600 mm z-travel: 1600 mm spindle taper ISO: 50 spindle turning speed range: 22 - 4000 U/min rapid traverse: 24 / 36 m/min main drive: 37 kW total power requirement: 50 kW with CNC HEIDENHAIN TNC 430 automatic Universal Milling Head automatic toolchanger 90-pockets coolant attchament and chip conveyor Nodpfx Aev Uzt Asbvjcp *

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 670 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 1,440 rpm, spindle speed (min.): 1,440 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,620 mm, total width: 3,475 mm, total length: 3,200 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, rotational speed (min.): 18 rpm, table load: 1,200 kg, overall weight: 6,500 kg, workpiece weight (max.): 1,200 kg, bed width: 630 mm, Console Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Control Panel Axis Digital Readout Complete Overhaul Performed in 2025 Warranty: 12 months Availability: IMMEDIATELY AVAILABLE CONDITION OF A NEW MACHINE – COMPLETE OVERHAUL IN GEOMETRICAL ACCURACY ACCORDING TO MANUFACTURER’S SPECIFICATION FGSV 50 – Technical Data: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 3,200 mm Overall width: 3,475 mm Overall height: 2,620 mm Total weight: 6,500 kg Total power consumption: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Cross travel Y-axis: 670 mm Vertical travel Z-axis: 500 mm Working spindle: Ncjdsxp Itbepfx Abvep Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,440 rpm Spindle motor power: 15 kW Max. spindle torque: 2,000 Nm Feed range X – Y / Z: Number of steps / range: 16 / 10 – 1,800 / 2.5 – 450 mm/min Rapid traverse: 4,000 / 1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,200 kg Details of the performed overhaul available upon request.