Carton erector

W&W

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Fsdeyz Sn Nepfx Ad Nsga

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Fjdocqvhwopfx Ad Njga Location: From stock 54634 Bitburg - available immediately -

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Fjdsyywl Rjpfx Ad Nega Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Fgedpfx Asycktrod Nja Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: new, functionality: fully functional, Year of construction: 2024, The Rotection flow packaging machine is suitable for packaging various products. A big operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Operating display: 10" touchscreen, can be swiveled using the extension arm for comfortable operator handling Drives: Servo Packing length: 900-450mm Packaging width: 35-200 mm (depending on film width) Packing height: 5-80 mm (depending on forming shoulder) Speed: 30-100 bags/min. in continuous operation Speed: up to 60 bags/min. Intermittently Film width: 90-400 mm Consumption: approx. 8 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 800 kg System dimensions: approx. 4370 x 1020 x 1550 mm (LxWxH) Error rate: < 5% Print mark sensor: Yes Winding shaft: fixation of the roll by hand without compressed air including roll stop for precise application Roller mount and guide: Overhead Printer holder: possible for an extra charge We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance. Fgodpfx Adeq Ikhho Nsa

Condition: new, I am offering a brand new Siemens SIMOTICS motor (1FE series) – a professional servo/spindle motor designed for inverter duty. This is a high-grade industrial motor, commonly used in CNC machine tools, delivering high power, precision, and reliability. The motor comes from warehouse stock (New Old Stock – NOS), unused and stored in original Siemens packaging. ⚙️ Technical Data Manufacturer: Siemens Fgsdpfx Adjyxqmxo Nja Series: SIMOTICS Model: 1FE1114-6WW11-1BN2-Z-T56 Power: 20.9 – 26.8 kW Voltage: 425 V Current: 58 / 85 A Nominal speed: 1000 rpm Max speed: 6000 rpm Max torque: 330 Nm Duty cycle: S1 / S6-40% Cooling: water-cooled Temperature sensor: KTY84-130 Protection rating: IP00 Insulation class: F (155°C) 📦 The set includes: Siemens SIMOTICS motor Original Siemens packaging (as shown in the pictures) 📌 Key advantages: ✔️ Condition: NEW (warehouse stock / NOS) ✔️ Made in Germany ✔️ Genuine Siemens industrial quality ✔️ Ideal for CNC / machine tools / automation ✔️ High power and torque

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 Fodpfxswml S Eo Ad Nega - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: new, Year of construction: 2025, Delivery every Monday/Tuesday! Reliable! Mobile folding bench 1400/2.0mm without roller shears We are your partner when it comes to sheet metal working machines. Our claim to ourselves is to provide high-quality and reliable work in order to more than meet your requirements! We are only so successful because we put our heart and soul into our work! Technical specifications the maximum working length 1400 mm the max. thickness of steel sheet for 2.0mm bending beam 24 mm the weight of the handheld machine is about 190 kilograms lifting the top beam in three layers The maximum clear width between the beams is 80 mm Delivery throughout Germany 165 euros Price: 1450 euros incl. transport rollers Delivery time: every week Cash on delivery The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) optionally cost 350 euros Fgodpfeb Hqa Esx Ad Nsa Manual folding machine costs 75 euros as an option The machine complies with CE guidelines and has a 12-month guarantee. We issue the invoices with 0% (intra-community delivery) as well as with 23%. We are looking forward to your contact!

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 Fsdpfewf Rgrjx Ad Noga --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC Fsdpfx Aewf Rg Esd Njga --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Year of construction: 1999, condition: good (used), Built in: 1999 Capacity (A4 stacks packaged): max 20 - 24 Pakete/min Capacity ( A4 stacks loose): max 16 - 20 Pakete/min Pallet height (incl. pallet): max 1.600 mm Pallet size : max 1.200 - 1.200 mm Size: max 420 x 307 x 320 mm Size: 148 x 110 x 50 mm Equipment: • infeed and buffer section • turntable • infeed table • automatic palletizer • roller track for full pallets • intermediate cardboard slip sheet hopper Fjdpfodym Srex Ad Noga • pallet dispenser

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary Fjdpfxowf Rgxj Ad Njga welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: good (used), NM-420 W30 Banding Machine This brand new machine is based on proven Western designs. Year of manufacture: 2025. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Fjdpfx Asywdq Uod Njga Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 26 cycles/min Dimensions of the banded product: 400 x 200 mm The kit includes tapes and an instruction manual.

Year of construction: 2004, condition: ready for operation (used), Built in: 2004 Format range width: 200-420 mm Length: 200-420 mm Fjdpfx Asd N S Adjd Njga Height: 30-400 mm Speed: bundles/min 25 Pakete/min Width of film: max 550 mm Film thickness: 12-80 mµ Diameter of film reel: max 350 mm

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system EW Menn including vibratory feeder, Skako, and slide conveyor Fsdpewkqvqofx Ad Nega