Single-shaft shredder

WEIMA WL 4

Condition: excellent (used), Catalogue no.: 7923 TECHNICAL DATA inlet of loading hopper: 800x600mm outlet for shredded wood: Ø 150mm rotor working width: 590mm main motor: 18.5kW pump motor: 0.75kW number of blades: 14 pcs blade size: 30x30mm sieve: 15/20mm pressure drawer electric auto-reverse Gisdpfx Adoyug Euebjp dimensions (L/W/H): 1750x1200x2000mm weight: 1100kg ADVANTAGES – German-made – DTR technical documentation – pressure drawer – auto-reverse – used chipper, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of major exchange rate fluctuations, the price may change)

Condition: like new (used), Year of construction: 2021, operating hours: 337 h, Multivac R535 Thermoformer The R 535 thermoforming packaging machine is the largest configurable machine system from MULTIVAC. It offers a uniquely wide range of equipment options as well as an extremely high packaging output. Thanks to the unique diversity of the R 535, MULTIVAC is able to meet the most challenging of customer requirements. This R 535 is from 2021 and has only 337 production hours and is in new condition. The machine is including the following equipment: - Bell Mark – IntelliJet TSX 10” Thermal Inkjet Printer; - Chilly 45 chiller Gisdpsxfq D Ujfx Adbep Manufacturer: Multivac Model: R535 Year: 2021 Production Hours: 337 Film Width: 645mm (Top)  / 645mm (Bottom) Stroke Length: 500 mm Max. Forming Depth: 75 mm Vacuum Pump: Busch 105m3/h Capacity: Max. 12 cycles/min Machine Dimensions LxWxH: 1.050x175x225 cm Machine Weight: 2.000 kg.

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Gjdpfxoytrmzs Adbjip

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Number of working hours 1741 h Dimensions (L/W/H) 1650x1200x1595 mm loading dimensions L x W x H 1650x1200x1800 mm Weight 1300 kg WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF Gisdpfx Adsyrtzwsbjp materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: used, Machine: Screw conveyor, Screw conveyor Type: Askania Maschinenbau GmbH, screw conveyor Model: TSF 315, No. 197 Gedpfx Aorn U H Hjdbeip Year of construction: 1999 Mass: 350 kg Rated voltage: 230/400 V/ Connected load: 4 KW Length: 9.40 m Ø auger: 250 mm Material: Steel auger/stainless steel trough

Condition: excellent (used), operating hours: 820 h, Residual Wood Shredder Manufacturer: WEIMA Type: WL 4 Feed opening: 600 mm x 800 mm Hopper capacity: 0.6 m³ Throughput rate: depends on material and screen Rotor diameter: 252 mm Rotor speed: 60 - 100 rpm Motor power: 18.5 kW Tools: 14 knives Screen perforation: 20/25 mm Extraction nozzle diameter: 160 mm Air velocity: 28 m/sec Weight: approx. 1,200 kg Dimensions (L x W x H): 1600 x 1150 x 1655 mm Including all documentation Note on used machines: Gedpfx Aoylaf Ajdbsip • Technical data and prior sale subject to change without notice. • Stated prices are ex location, loaded onto truck, ready for pickup. • Machines have been cleaned and function tested. • All machines are purchased as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our premises. • Special agreements are valid only in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 1993, output 18,5 kw Gisdpfeyk H Tqjx Adbop number of blades 28 Weight 1300 kg

Condition: reconditioned (used), Year of construction: 2005, Hammer mill larom hammer mill model Lau 8 Mouth 1650x700 mm Electric motor Giedpfxsim Eans Adbop Mounted on chassis, regulating hopper, vibrating feeder.

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gedpfxowu Uy Ie Adbjip Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Godpfxsvw Tw Eo Adbeip Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm with an extra-ribbed sliding plate

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication Gisdpfswhk Ubex Adbop - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Gioderq Eu Repfx Adbjp Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Gedpfjbtnftex Adbjip Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Location is 58762 Altena Gjdpfx Adog Azmmsbeip

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Gsdsbunq Hepfx Adbjip Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available