Roller tracks / stop systems

WMT R-A 6000

Condition: new, Fastech Horizontal Bandsaw, Semi-Automatic, BMSY 360 DGH ECO Round Cutting Capacity mm: 360 Flat Cutting Capacity mm: 510 x 360 Square Cutting Capacity mm: 360 +30° Round Cutting Capacity mm: 360 +30° Flat Cutting Capacity mm: 440 x 360 +30° Square Cutting Capacity mm: 360 +45° Round Cutting Capacity mm: 360 +45° Flat Cutting Capacity mm: 390 x 360 +45° Square Cutting Capacity mm: 360 +60° Round Cutting Capacity mm: 200 +60° Flat Cutting Capacity mm: 200 x 360 +60° Square Cutting Capacity mm: 200 -30° Round Cutting Capacity mm: 360 -30° Flat Cutting Capacity mm: 440 x 360 -30° Square Cutting Capacity mm: 360 -45° Round Cutting Capacity mm: 360 -45° Flat Cutting Capacity mm: 390 x 360 -45° Square Cutting Capacity mm: 360 -60° Round Cutting Capacity mm: 260 -60° Flat Cutting Capacity mm: 260 x 360 -60° Square Cutting Capacity mm: 260 Godpfx Aog Ekttjkhekd Motor Power, Main Drive kW 3 Hydraulic Pump Power kW 0.37 Motor Power, Coolant Pump kW 0.12 Band Speed, stepless: m/min 20 - 100 Saw Band Dimensions mm: 4800 x 34 x 1.1 Height of Work Surface mm: 860 Weight kg: 1450 Length / Depth / Height mm: 2650 / 1210 / 1870 Double Miter Saw Stepless Band Speed Hydraulic Vise High-Performance Gearbox Hydromechanical Saw Band Tensioning Saw Band Brush Digital Display for Miter Angle

Year of construction: 2021, condition: new, Fastech Horizontal Bandsaw, Fully Automatic, BMSO 350 GA Cutting capacity (round): 350 mm Cutting capacity (rectangular): 400 x 350 mm Cutting capacity (square): 350 x 350 mm +30° Round cutting range: 320 mm +30° Flat cutting range: 400 x 350 mm +30° Square cutting range: 350 mm +45° Round cutting range: 320 mm +45° Flat cutting range: 290 x 300 mm +45° Square cutting range: 290 x 290 mm Motor power, main drive: 2.2 kW Hydraulic pump power: 0.37 kW Coolant pump power: 0.12 kW Band speed, infinitely variable: 20-100 mm Saw band dimensions: 4160 x 34 x 1.1 mm Height of work surface: 760 mm Weight: 1050 kg Length: 2450 mm Depth: 920 mm Height: 2020 mm Roller conveyor, 1200 mm Infinitely variable band speed Hydraulic clamping device High-performance gearbox Gkedpeg Ekt Njfx Akhsd Hydromechanical saw band tensioning Saw band brush Control

Condition: new, bore capacity in steel (diameter) 40 mm Gjdpevn U Awjfx Akhskd throat 300 mm bore stroke 120 mm spindle taper MT 4 MK table: 500 x 460 mm column diameter 115 mm turning speeds 75- 3200 U/min feeds 0,1 - 0,18 - 0,26 mm/U total power requirement 1,5 kW weight of the machine ca. 350 kg range L-W-H 2,2 x 0,8 x 0,7 mm Column drilling machine with: Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg

Condition: new, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 120 mm Gedpoupxi Hsfx Akhekd spindle taper MT 4 MK table: 500 x 460 mm column diameter 115 mm turning speeds 75- 3200 U/min feeds 0,1 - 0,18 - 0,26 mm/U total power requirement 1,5 kW weight of the machine ca. 350 kg range L-W-H 2,2 x 0,8 x 0,7 mm Column drilling machine with: automatic feed Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg

Condition: used, Year of construction: 1983, machine/vehicle number: 18071, Ref. No. 25393 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling capacity in steel ST 60: 32 mm - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Drill spindle speeds steplessly adjustable: - Range 1: 130 – 480 rpm - Range 2: 480 – 1750 rpm - 3 feeds: 0.1; 0.2; 0.3 mm/rev - Throat depth: 290 mm - Maximum distance table - drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Height adjustable by rack-and-pinion and handwheel Godpfoy En I Hox Akhokd - Separate coolant unit - Drive: 400 V / 0.9 / 1.3 kW - Space requirement approx.: W 660 x H 1900 x D 700 mm - Weight approx.: 280 kg

Year of construction: 2026, condition: new, With our manual length stop MD 50 d, we offer you an inexpensive length stop that is extremely easy to use in order to increase the productivity and quality of your production. It is quickly brought into position by the user and securely clamped there using a hand lever. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Gksdpfx Ajidln Nekhed

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MA0145_1375, Exhibit immediately available: New Kaeser Aircenter SK 16 - 8 bar screw compressor with integrated refrigeration dryer and 270 liters compressed air tank Control Sigma Control 2 Year: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 9 KW Delivery quantity 7,5 bar: 1.61 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Gedpfx Akoh Ey N Uehokd Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 330 mm 400 x 310 saw band length 3820 x 34 x 1,1 mm band speed 22 - 88 m/min table height 930 mm total power requirement 2,2 kW Gjdpfewinykex Akhskd weight of the machine ca. 0,8 t dimensions of the machine ca. 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Drilling capacity, cast iron / steel ----- 45 / 40 mm Godpfx Asga T H Dskhjkd Tapping capacity, cast iron / steel ----- 24 / 20 mm Motor ----- 1.5 kW Speed range ----- 50 ~ 1450 rpm Spindle stroke ----- 180 mm Spindle taper ----- MK4 Automatic spindle feed ----- 0.1 - 0.2 mm/rev Drilling table ----- 560 x 560 mm Base ----- 730 x 500 mm Overhang ----- 350 mm Column diameter ----- 150 mm Maximum distance, spindle - table ----- 770 mm Maximum distance, spindle - base ----- 1210 mm Weight ----- 600 KG INCLUDED * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor * CE plug * Case with various tools

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER with AW 5000 Hose Package ✅ Scope of supply: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC cooling unit – Standard equipped with flow control, thermocontrol, and coolant filter. The cooling unit switches off if the water cooling system fails or becomes too hot, to protect the hose package. These functions cost approximately €400 more at Fronius. ➤ Fronius VR 7000 wire feeder case – Compact and practical – in our opinion, the most useful wire feeder case – the wire is safely stored in the closed case. ➤ Fronius intermediate hose package, long – each unit is supplied with a 5-meter long connecting hose package between the power source and the wire feeder case for greater flexibility and easier handling. Take the wire feeder case with you to locations that are more difficult to access! The connecting hose package is neatly attached to a hook on the side of the unit. (The hooks are manufactured by us) ➤ Fronius large trolley – Probably the best trolley with gas cylinder holder on the market. ➤ Ground cable 3-4m ➤ Pressure regulator from Messer, new ➤ Spool adapter for large wire spools, new Gjdswbillopfx Akhekd With this unit, almost all materials can be welded, including aluminum, steel, and V2A. It has filler wire programs and is also suitable for MIG brazing (Cusi), which is often used in the sheet metal industry. Additional options are available at an extra charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a unit will receive an additional 2nd hose package free of charge. IMMEDIATELY AVAILABLE VAT INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via Whatsapp and Viber. ✅ Questions ✅ Questions ✅ Questions ✅ Questions: ✅ Questions ✅ Questions ✅ Questions ✅ ►►► What is the condition of the units? For clarification, we buy like-new used units, disassemble them, check everything, and replace any worn parts if necessary. Only after a successful test weld is the unit approved for sale. "All" units are clean and have no burn marks on the displays or numerous burn marks or dents on the unit. You are buying from us an item that is also worth seeing and does not look completely worn out! ►►► Do we receive an invoice when we buy from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for an intra-community delivery within the EU are met. ►►► What payment options are available? Advance payment or cash upon personal collection. ►►► Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other manufacturers! We are familiar with these units and do not sell anything that we do not know about. All prices are starting prices; you can configure the units with us. Robot unit or hand unit. Long or short connecting hose package. Various hose packages to choose from. Synchro pulse. 270, 400, or 500 ampere units in stock. CMT version available as hand or robot unit. It is best to call us; we will discuss your application area, and you will receive an initial price estimate from us.