Rotor scissor

ZENO ZRS 1600x1200

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg Hedpfx Abjh Di H Dsgjp

Condition: excellent (used), functionality: fully functional, machine/vehicle number: XP2000, total height: 7,550 mm, total width: 2,780 mm, total length: 3,070 mm, load capacity per storage section: 500 kg, construction height: 7,600 mm, type of input current: three-phase, input voltage: 415 V, empty load weight: 500 kg, warranty duration: 12 months, load capacity: 20,000 kg, Equipment: documentation/manual, safety light barrier, Kardex shuttle 500 XP2000 415v Colour Blue & Grey Max load per tray 500Kg Number of Trays 40 Total machine load 20,000 Kg Tray Dimensions width - 2450mm x 864mm depth Machine Dimensions 7550mm x 2780mm x 3074mm Hsdpfx Aborgqw Esgjp These machines are modula and can be reduced in Height to fit any facility Full installation service available with 12 months warranty Supply only without warranty Service & Maintenance available after installation if required

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation! Hjdpfxeqabm Es Abgsp

Year of construction: 1993, condition: used, TYPE: DEA 400/2000 Year: n.d. MAXIMUM RAM CAPACITY: 400 tons SLIDE STROKE: 1,100 mm MAXIMUM SHUT HEIGHT: 1,600 mm TABLE DIMENSIONS: 2,000 x 1,600 mm Hedpfx Ajihf R Uebgjp FAST STROKE: 650 mm/sec CUSHION CAPACITY: 160 tons CUSHION STROKE: 400 mm HEIGHT ABOVE GROUND: 5,800 mm DISTANCE BETWEEN UPRIGHTS: 3,400 mm LATERAL WINDOW: 1,600 mm

Year of construction: 2023, condition: new, machine/vehicle number: 6YXXX23, SINC FEROX is the must have machine in scrap business, to reduce the volume or to prepare scrap for baling or just to get it in to size for melting. FREOX alligator shears are available from 300mm up to 1000mm cutting size, as longer the cutting blade, as higher the cutting force. Hjdomqku Uepfx Abgop The machines are able to operate with pedal, semi-automatic and full-automatic. The option to set the cutting opening is easy solved with the manual limitation. The machines are designed for to have minimal service needs; the blades are reversible to be reused on all four edges.

Condition: new, Modern, precision pillar drilling machine based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and series-standard chip breakage control. The digital display shows feed rate, speed, and drilling depth. Reversible switch for right/left rotation. Emergency stop button. Full motor protection. Pre-configured machine with special equipment including a threading unit, single-cut function, and LED lamp. Normal drilling capacity in E 335: 30 mm Threading capacity: M 20 Spindle: MK 3 Feed rate steplessly adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Overhang: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Motor with pole change: 0.8/1.5 kW Spindle speeds steplessly adjustable: Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Hedof Ey Auspfx Abgjp Pre-configured machine including special equipment: - Threading unit - Single-cut function - LED lamp

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m Hsdpfxofx Hv Ho Abgjp hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. Hodpfxsiklxbe Abgop We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2015020890, For sale is a magnetic filter system with integrated cleaning system. Filter systems of this type are usually made individually to order from customers. In this system, there is an exhibition purpose, which only served to show, and was hardly in use. product benefits Installation possible into existing production lines Separation of any ferrous metal contaminants Very corrosion resistant High wear resistance Hodpfx Aecwghbobgsp Compact design Low maintenance Technical details - 400 x 400 x 390 mm - Inlet 260x260mm - Inlet 260x260mm - 8 pcs magnetic filter rods

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Hodpfsyf Hlisx Abgjp Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework