Concrete Pipe Machine

ZİM Mühendislik ZIM A SERIES

Condition: used, mileage: 58,695 km, power: 235 kW (319.51 HP), first registration: 01/1978, fuel type: diesel, overall weight: 22,000 kg, axle configuration: 3 axles, color: green, gearing type: mechanical, Year of construction: 1978, Equipment: all wheel drive, crane, 1429. GW186970259 Year of manufacture: 1978, vehicle has never been registered, mileage: approx. 58,695 km read (no guarantee) Power: 320 HP Displacement: 12,763 cc Drive type: diesel Own/total weight: 13,190/22,000 kg Seats: 3 in the front Equipment: Crane Palfinger PK7500N V751, year of manufacture 1976: Crane loads: Nlodpfx Ahjd T T Nge Ujk * 730kg at 7.10m * 1180kg at 6m * 1450kg at 5m * 1850kg at 4m * 2450kg at 3m * 3750kg at 2m mounted at the rear Plane ----We are happy to accept your vehicle as payment, financing/leasing also possible without a down payment, subject to errors and prior sale. Do you have any questions? We are happy to advise you!

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet. Nljdpfxeh Dwr Uo Ah Usk Addendum to the measurement report!

Condition: good (used), Robot Manfacturer: Staeubli Type: RX170 Nsdpfxebrhtdo Ah Ujlk

Condition: excellent (used), Year of construction: 1990, power: 55 kW (74.78 HP), operation weight: 4,000 kg, 1 1 Trough Conveyor Belt TFB 500x7500 – 2 1 Vibrating Feeder Trough VR 400x3500 – 3 1 Vibrating Screening Trough VSR-1/500x12500 – 4 1 Metal Detector – – 5 1 Drum Chipper RE-TH 150/500/3 – 6 1 Screening Machine VSR-1/1000x4000 – 7 1 Scraper Conveyor ZKF 75/60/2x21000 – Njdpfx Ahsw T Rw So Uelk

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. Nsdpfx Ahsirtdpj Ujlk This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: good (used), Year of construction: 2003, Manufacturer: KUKA Type: KR 210 L 180 Year of manufacture: 2003 Maximum load capacity: 150 kg Nlsdpfx Aoh Dw Dqeh Uok

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min Nedpfevptbusx Ah Uolk

Year of construction: 2022, condition: new, ZIM T1200 machine can produce pipes 300mm – 1200mm diameter and 500mm – 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. Nsdpfx Ahsibbiks Uelk We use SIEMENS brand PLC microprocessors on automatic machines. There exists motrar bunker and motrar filling systems on machines. Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Special designed strong chassi of the machine enables long live producing without errors.

Condition: used, Automatic machine for producing plastic bags for T-shirts or shopping bags Manufacturer: COSMO Model: ST-99 Bag size: - length: 350 - 650 mm - width: 160 - 365 mm - thickness: 0.008 - 0.05 mm Throughput: 180 - 300 pcs/min Installed power: 12 kW Nlsdpfx Ahsrww E Is Uek Power supply: 230 V, 3 phases, 50/60 Hz Dimensions: 7150 x 1600 x 1750 mm Additional air compressor required: 10 hp - not included Technical condition: used machine

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. Njdpexg Ubyjfx Ah Uslk There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer