Used bale presses for sale (215)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Gujdpfx Asx Dnb Ujb Uek Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Incoming Baling Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2021 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2021 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, carton Operating manual is included. Guodpsx E Td Hjfx Ab Ujk Please note: All technical data are based on manufacturer information. We accept no liability for the details provided or for any errors. The offer is subject to change without notice, prior sale reserved, and may be revoked at any time. Viewing by appointment possible. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Press force: 532 kN Voltage: 400V Max. bale weight: up to 550 kg (depending on material) Bale size: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 x 65 cm Condition: Very good! Functionality checked. Contact us for a video. FLITS Rental & Sales service: with every machine, we supply one bundle of binding wire (120 wires). Need additional bundles? Request a non-binding quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machinery for both businesses and individuals. We focus on providing efficient solutions in internal transport, cleaning, waste processing, and working at height. Gjdsx Hfp Depfx Ab Ueuk Waste baler, Paper baler, Cardboard baler, Plastic baler, Waste compactor, Recycling, Textile baler, Waste, Waste processing.

Condition: used, Year of construction: 1983, total width: 750 mm, total height: 900 mm, total length: 2,400 mm, Empty weight: 500 kg Gjdpfx Aboxalyyj Uouk - Year: 1983 - Documentation available: No - CE certificate present: No - Transport dimensions: 2400mm x 750mm x 900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, Lot consists of: Gusdpfx Aex E T R Hjb Ujk (1) Baling press Technical Details: 4kw

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 25038, filling opening width: 650 mm, filling opening length: 800 mm, bale width: 750 mm, bale height: 1,000 mm, bale weight: 700 kg, total width: 4,270 mm, total height: 5,000 mm, total length: 7,000 mm, input voltage: 360 V, pressure: 200 bar, oil tank capacity: 185 l, power: 15 kW (20.39 HP), A dust extraction system is included with the press. Guedpfx Aex Dzg Rsb Uok

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. This is a HBC80 baler (45kW) with cross wires and a chain conveyor. Bale press built: 1997 Chain conveyor built: 2015 Baler Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Intermediate hopper Conveyor chute Control cabinet Schneider PLC Chain conveyor Horizontal floor section: 6000 mm Rise section: 12500 mm (30 degrees) Gsdpfx Asxvh Dysb Uouk Gooseneck This baler can be inspected in operation until the end of March.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Incoming Baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Guedpox E Tdgsfx Ab Usk Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, carton The operating manual is available. Please note: All technical data refer to the manufacturer's information. We assume no liability for the information provided or for any potential errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 Sh Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400V Maximum bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm x 80 cm deep x 55 cm high Condition: Very good! Functionality checked. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need more bundles of binding wire? Request a quote with no obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We focus on delivering efficient solutions in the areas of internal transportation, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a wide range of machines suitable for deployment in various sectors. See our advertisements for: waste balers for efficient waste management, electric pallet trucks/stackers for fast and safe internal transport, scrubbers for thorough and professional floor cleaning, forklifts in various designs suitable for different working environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you quickly have the right machine at your disposal. Visit our location You are very welcome to view the machines at our premises. We are located at: Guodpfex Af Ntex Ab Uok Schoterlandseweg 94, 8413NE Oudehorne, Netherlands. Visits are possible by appointment, so we can take the time to inform you thoroughly and show you the right machines. Contact Do you have questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you further. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing DIXI

Condition: good (used), Welger Type: RC 660 Roller compactor with Brück suction Compact and fully automatic Used exclusively for producing pressed bales from low-density packaging materials. Application variants Press materials Paper edge trimming (strips and endless) Paper and film bags PP film edge trimming Film strips Clothing protection film (PP/PE films) PP/PE fiber material Insulating and nonwovens Foam mesh Packaging foam Tetrapak Length 2100mm, width 940mm, height 1755mm Dimensions of filling shaft 330 mm x 600 mm Guedpfx Abjdtxbio Usk Bale format max. 400 mm x 600 mm Bale weight 20 - 30 kg depending on the material being pressed Press density 250 - 400 kg/m³ depending on the material being pressed Throughput daily output 30 bales / day Feed speed 0.36 m/s RC 660 3X 400V 50Hz 16A 2.2 kW 5.0A 700 kg Brück extraction Series: KFA Size: 60-30-3000 Air output: 6,000 m³/h Motor output: 0.3 kW Filter area: 30 m² Negative pressure: 3,100 Pa Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2005, Lot consists of: (1) Baling press Technical Details: 4kw Gedpfx Abox E S Ude Usuk

Condition: good (used), Waste compactor, waste compactor, compactor container, waste container, self-compacting container, waste compactor, paper compactor container, paper container, cabinet compactor, vertical baler -Manufacturer: DIXI, Cabinet baler, vertical baler -Type: 15 S Gusdpfx Abexwuils Usk -Drive power: 4 kW -Pressure pressure: t -Interior dimensions 1100x690x1370 mm -Transport dimensions: 1540/950/H1970 mm -Weight: 834 kg

Condition: like new (used), Year of construction: 2022, operating hours: 6,000 h, machine/vehicle number: 006424, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, This very young baler is sold by Bollegraaf Recycling Solutions. This is a HBC100 (75kW) baler featuring cross wires, FULL HARDOX, and a Bollegraaf chain conveyor with Bordoflex. Gjdpfjxvh Ewex Ab Usuk Both the chain conveyor and the baler are equipped with all possible options for maximum efficiency in baling all types of plastics. Both units were built in 2022 and have very few operating hours. The previous owner purchased a new Bollegraaf system and traded in the machines in question. After disassembly, this baler is sold with a 3-month warranty. HBC100K Baler (75kW) 390mm supports Intermediate hopper Conveyor chute Platform with caged ladder Additional photocells Frequency controller for the main motor for energy savings APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) Cross wires (3 horizontal wires and 5 vertical wires) Full Hardox lining inside the baler Bale exit Hydraulic lifting mechanism for both knotting sections for improved accessibility/maintenance Bale length display Air conditioning on the control panel Chain conveyor frequency controller Hydraulic oil heater Hydraulic unit cooler 4G modem for remote support Chain conveyor Bollegraaf HBT 1200/1800*20400 Equipped with Bordoflex for extra chain protection Dirt discharge plate Supports Chain lubrication

Condition: good (used), Year of construction: 2016, functionality: fully functional, Incoming Bale Press Dixi 60 SLD, Year of Manufacture 2016 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of Manufacture: 2016 Drive Power: 7.5 kW, 400 V / 32 A Filling Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370–410 kg Tying: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Please note: All technical data are based on information provided by the manufacturer. We assume no liability for the accuracy of this information or for any potential errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Gjdpfx Aox E Tcvob Ujuk Sale is ex works, against advance payment, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. Godpjxy Iycjfx Ab Ujuk We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, pressing force: 26 t, Baler ORWAK Compactor 3325 Gedpfxox Hfi Re Ab Ueuk Pressing force: 26 tonnes / 260 kN Year of manufacture: 2023 Very good condition!

Condition: good (used), Year of construction: 2012, functionality: fully functional, Incoming Bale Press Dixi 60 SLD, Year of manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Guedpfox E Tccox Ab Ujk Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the accuracy of the details provided or for any errors. This offer is subject to change without notice and may be withdrawn or sold at any time. Inspections are available by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: used, Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Presto CC 40 M Baler Technical Data: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Gusdpfjxuq E Djx Ab Usk Throughput at bulk density of: 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. Operating manual and CE declaration are available. Note: Channel discharge is fully automatic and adjustable. Please note: All technical data are as stated by the manufacturer. We accept no liability for the information provided or for any errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, prepayment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Inbound: Vertical Baling Press HSM V-Press 1160 plus, Year of Manufacture 2019 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Godpfx Abjx E S Ans Ueuk Stock No.: 9969 Year of manufacture: 2019 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, Cardboard, Film Instruction manual is available. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the specifications provided or for any potential errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex-location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Baler Avermann, Model AVOS 1410 BR5 – 45/80, Pressing Force 80 t, Year of Manufacture 2016 Technical Specifications: Manufacturer: Avermann Maschinenfabrik Model: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (L x W x H) Machine weight: approx. 18,000 kg Gedjx Dkkxjpfx Ab Ueuk Remarks: The press is still in operation and can be inspected upon request. It is expected to be available from February 2026. A suitable WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Additional images available upon request. Please feel free to contact us. Please note: All technical data are based on manufacturer’s information. We do not accept liability for any errors or omissions in the provided specifications. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, prepaid, without guarantee or warranty.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Vertical baler HSM VL 600, year of manufacture 2002 Technical data: Manufacturer: HSM Model: HSM VL 600 Year of manufacture: 2002 Pressing force: 60 t Drive power: 7.5 kW Cycle time (idle): 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Machine weight: 3575 kg Gusdpfx Aox A Ur Dsb Usk Materials: Paper, cardboard, film Note: The operating manual is available. Please note: All technical data is based on manufacturer specifications. We do not accept liability for the accuracy of the information provided or for any possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baling Press Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2014 Drive: 30 kW Pressing force: 50 t Operating hours: 7,145 Guedpfx Aboxzz U As Uek Filling opening: 1,600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 20 s Tying: 4-fold Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Materials: Paper, cardboard, film, PET bottles The press is in good condition and has been inspected and tested. A video can be found on our YouTube channel or our website. Note: The press has been overhauled. The knives, counter-knives, and all sliding plastics have been replaced. Please note: All technical data are based on the manufacturer's information. We assume no liability for the information provided or for possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works, prepayment only, without warranty or guarantee.

Condition: used, Year of construction: 2003, functionality: fully functional, Baling Press Presto CC 13 V, Year of Manufacture 2003 Technical Specifications: Manufacturer: Presto Model: CC 13 V Year of Manufacture: 2003 Pressing Force: 13 t Cycle Time: 24 s Drive Power: 4 kW Feed Opening: 780 x 750 mm Feed Volume: 0.39 m³ Binding: triple, automatic Throughput at bulk density of 35 kg/m³ - 1.7 t 60 kg/m³ - 2.5 t 100 kg/m³ - 3.8 t Bale Dimensions: 700 x 750 mm Godpfow Tyxlex Ab Uouk Bale Weight: up to 250 kg Dimensions: 2800 x 1050 x 1830 mm (LxWxH) Machine Weight: approx. 1,900 kg Materials: paper, cardboard, film The press is in good condition and has been function tested. Please note: All technical data is based on manufacturer specifications. We do not assume any liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Viewing by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Bale Press Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Gsdpfxjxyga Io Ab Ueuk Year of Manufacture: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370-450 kg Tying: triple manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film The operating manual and EC Declaration of Conformity are available in German. Please note: All technical data is based on manufacturer information. We do not assume liability for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex works, against prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Baler Dixi 60 SLS, Year of manufacture 2016 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2016 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Tying: 3-fold manual Gjdpfx Asxygausb Usuk Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film The operating manual and EC Declaration of Conformity are available in German. Please note: All technical specifications are based on manufacturer information. We do not accept any liability for the details provided or for potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by prior appointment. Sale is ex-works against advance payment, without warranty or guarantee.