Condition: good (used), Functionality: fully functional, Fully operational water demineralization station. Capacity - 800 l/h Duslqjvc Ut So Rg Abst

Year of construction: 2020, Condition: new, Radial fan ZWWOAX 100 up to 250 degrees Celsius Stainless steel acid-proof fan. New, never used. Dolq Rgemi Txzo Absut Inlet diameter fi 1000 mm Possibility to select parameters depending on the needs. Capacity from 40000-85000 m3/h Delta Pc from 500 - 3000 Pa Price without engine

Condition: used, Year of construction: 2007, 2 (two) chambers Dujlq Rg Aoiqn Aiobjt Max. size: 2580 X 4200mm Min. size: 100 X 200 mm Thicknes: 4-19mm LowE The line is currently dismantled and stored in our warehouse as shown on the pictures.

Condition: good (used), Year of construction: 2002, automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply Djlq Rotpgupsg About RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift (up to overhead frame conveyor) FRS-25A, overhead frame conveyor down to frame set section The machine is available end of May from current place in Belgium The machine is still in operation and can be seen on site on appointment.

Year of construction: 2003, operating hours: 43,200 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 3937/02/03, VOLT/AMPERE 230/400 – 50/3x16 Components of the supplied blasting plant: 1. Pressure jet 2. Blasting cabin GMA 2000 3. Blasting agent recuperative system – RGWS 255 4. Dedusting system – DUST – EX 1703 2.2 kW Jet height max. (mm) 2000 Duelq Rg Ajvxr Irebot Glass thickness (mm) 70

Condition: new, Year of construction: 2022, operating hours: 10 h, Functionality: fully functional, total length: 8,000 mm, total width: 2,400 mm, total height: 3,400 mm, working height: 720 mm, input voltage: 400 V, power: 31 kW (42.15 HP), Equipment: documentation/manual, Vertical washing machine 2000 mm glass passing height With inlet and outlet station 2500 mm each Glass running direction: right to left Max. glass-height: 2000 mm Duolqeu T H Dfe Rg Abst Glass thickness: 3 - 19 mm Working height: 720 mm +/-30 mm Power load: 31 KW Voltage: 3 phases/ 50 Hz/ 400 V/ Neutral Space: 8000 x2400 x3400 mm (L-B-H)

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: LSC20140241, Glass quality scanner. Fully operational. Documentation available in PDF. Duslsvcnwdjq Rg Abet

Year of construction: 2006, Condition: good (used), Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA Dolq Rgjh E T N Es About S/N XP 20100082 (from Glasmek AB Sweden renovated in 2010) Manufacture: Ashton Industrial Sales LTD / UK year of manufacture approx. 2000 Professional Heavy Duty Seaming /Arrissing Machine 2x Diamond belt cross belts High speed abrasive and diamond grinding belts 400 V , 50 Hz castor ball tables for easy movement of the glass sheets. Table dimensions: L x W X H = 3,85m x 1,20m x 0,9m Weight 600 Kg CE marked

Year of construction: 1991, Condition: good (used), machine/vehicle number: 154.03.10.01.0291, Giętarka do ramek dystansowych Lisec BSV-45 wraz z podajnikiem do ramek oraz drukarką. Min. wymiar ramki: 250 x 150 mm Duslq Rg Aeg D Hdpebet Max. wymiar ramki: 3000 x 2200 mm Napięcie: 380-3/N~50Hz Złącze: 10 kW Ciśnienie: 6 bar Waga: 1125 kg Gwarancja rozruchowa.

Condition: good (used), Year of construction: 1999, Functionality: fully functional, input voltage: 400 V, load capacity: 220 kg, type of input current: AC, power: 20 kW (27.19 HP), Equipment: documentation/manual, Lenhardt sealing robot VA-1K-V-REC-ZD, year 1999, running direction from right to left, for sealing of double glazed rectangles units: Technical details: sealing material used: PU minimum unit size: 390 x 190 mm maximum unit size: 4000 x 2700 mm Duslq Rg Ast Ucqxjbjt unit thickness: 12-60 mm single glass thickness: 3-15 mm spacer width: 6-24 mm maximum unit weight per meter: 220 kg inside diameter of base drum 200 litre: 571,5 mm (+1/-0,5 mm) inside diameter of catalyst drum 20 litre: 280 mm (+1 mm) compressed air supply: 6 bar compressed air consumption during normal operation: 250 litre/minute maximum transport speed: 48 m/min maximum sealing speed: 30 m/min The machine has been dismantled professionally by Lenhardt and can now be picked up from current location in Belgium

Condition: excellent (used), Year of construction: 2020, CATALYTIC COATING EQUIPMENT Dslqjvcc Epe Rg Absut

Condition: excellent (used), Year of construction: 2000, Brickyard equipment: Automated, universal line for the production of construction ceramics. The capacity of the line is on average 30-50 tons of wet mass per hour, i.e. about 6-10 thousand pcs/h of solid or hollow bricks. From 12-60 million pcs per year. All devices are renovated, ready to work, complete with electric motors and V-belts so that they can be started after assembly. Collection of devices ex Piotrków Trybunalski. Technical and operation documentation is attached to all devices. Line weight from about 1000 tons. The identical arrangement of devices can be seen at work in my plant in Jarosty Małe near Piotrków Trybunalski. There is also the possibility of technical and technological assistance, projects, documentation, assembly, commissioning. Duslsmkh Epoq Rg Abjt We also recommend pulverized-coal burners of our own production for firing ceramics in ring and tunnel kilns. The fuel for the burners is pea coal or other solid biofuels. I also have dryers, tunnel kilns and other equipment necessary in construction ceramics factories for sale.

Year of construction: 2008, Condition: good (used), Functionality: fully functional, machine/vehicle number: S2926SMA0099.10801, Laminator from the Swiss company 3S ( Swiss Solar Systems ). Data available in photos. Dolovad Imsq Rg Abjut

Year of construction: 2012, Condition: ready for operation (used), I sell a used bender for double glazing frames. Duslqoncd Dqs Rg Abet

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: GG65LC-14747, Bottero 543 LMT+ break tabel + loadvacuum ----- Jumbo size This line consists of the following: - Charger 508CCF with 1 fixed position and can also be loaded with a piston if necessary, the other side is from 2001 4.800 kg Duolqou H A Ups Rg Abjt - Cutting table 543LMT with transport belts and Low-E grinder from 2007 - Automatic breakout of X axis from 2007 - Breaking table from 2007 2.600 kg - QH tipping table from 2008 Price ex works and installation. AVAILABLE DIRECT FOR TRANSPORT MACHINE IS IN GOOD CONDITION

Condition: new, Year of construction: 2023, Functionality: fully functional, type of input current: DC, Sigmatek Central Processing Unit DCP646, new part originally packed 100MHz, 2MB memory Delq Rertnu Rsg Abeut HW: 5.6 X1.1 SW: 97030C-72

Condition: excellent (used), Year of construction: 2018, HYDROPHOBIC COATING APPLICATION DEVICE Duelq Rg Asvcc D Esbet

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: 1016797-11370, Hoaf Climatebox. Duslou Umkujq Rg Abjt

Condition: good (used), Year of construction: 1992, Vertical washer Delovccpnoq Rg Abeut

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: PO140315, NorthGlass AG1B50 glass tempering furnace. For technical data, please see the PDF file. Djlou T Ib Soq Rg Absut

Condition: as good as new (ex-display), Year of construction: 2019, Automatic horizontal thiocollating machine Duolqevccm He Rg Abst Max glass size:1800mmX2500mm Minimum glass size:350*350mm

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: CNC140901, Equipment: type plate available, GM-CNC-III is a working center with high technology. It can perfectly perform complicated working in short time, and the processed sheet is of high level which realized to obtain a CNC machine with smallest investment. The CNC working center applies numerical operation and control system to achieve dynamic management of each axis and speed precision control. So the shape is of precision and the processed sheet is of high quality. The flexibility of the control system solves the requirement of different products. The whole processing can be finished automatically without any human interference. CNC-III is perfect to process Furniture Glass, Construction Glass and Auto Glass. Djlqju R Dpis Rg Abjut

Condition: used, Year of construction: 2008, machine/vehicle number: 08013, DEVICE FOR CUTTING FIREPROOF GLASS AND MORE Duolsva Enusq Rg Abjt

Condition: new, Year of construction: 2022, TWO-SIDED CUT BLADE MACHINE Productivity, accuracy and flexibility are the main features of the HE500 series: double edgers with cup wheels for grinding flat edges. Equipped with the latest technologies, they are high-class products that meet the needs of the most demanding customers; in addition, their integrated electrical box optimizes the footprint and improves ergonomics Duelq Rg Asnfu Ndebjt The HE500 models are equipped with the best technical solutions: high-performance spindles, movements with brushless motors, ball screws for fast and accurate movements, top-brand components for maximum reliability, 18.5-inch HD touchscreen control panel with keyboard, compact and user-friendly and intuitive graphics with icons and drawings. All necessary settings can be manual or automatic and managed by the control device.

Condition: new, Year of construction: 2022, Functionality: fully functional, The glass cutting line includes an automatic loading table, a cutting table and a breaking table, and a control system. According to customer requirements, multi-station loading stations and glass storage system can be applied to our cutting line. The machine is capable of cutting shapes, circles, rectangles, squares and strips. Once the cutting information schedule is entered or imported from the customer's optimization software, the slicer will transmit the input glass requirements and rack location to the loading system in a sequential, overlapping order to keep the system running consistently. The glass is automatically fed into the slicer, cut and transferred to the breaking table. Loading table: The system consists of a roller conveyor and vacuum frames. The entire conveyor table is equipped with rollers. Each vacuum frame has individual arms that are nested between the conveyor rollers and tilt to pick up glass from the racks. The tilting motion is accomplished by an electric motor/gearbox drive system. Each individual arm is equipped with 4 adjustable frame suction cups. Cutting table: Features of the cutting unit Duelqjtxnw Te Rg Abet - Durable construction - Aluminum alloy bridge - Integrated head - Automatic glass detection before cutting - 360° rotation of the cutting head - Automatic proportional pneumatic cutting pressure control - Independent control valve of oil module