Year of construction: 1999, Condition: used, machine/vehicle number: 19084, Weight: approx. 3500 kg, max. load capacity: 750 kg, with vacuum beam, span: approx. 20,000 mm, with 15 two-sided storage racks, mostly made by HEGLA, built approx. 1990 - 1995, load capacity: 10 kg per side, mobile shelving, metal, painted, green, with 12 units and electric drive, rail-guided, with stationary loading, built in 2006 Feb Epyowacr Aoqwegb

Condition: good (used), Year of construction: 2007, Functionality: fully functional, input voltage: 400 V, type of input current: AC, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2007, consisting of: RSVN-35/25, frame set section, year 2007 RTVB-15/25ST, extension conveyor for measuring section, year 2007 RTVB-15/25MZU2, measuring section for gas filling press, year 2007 FPS-35/25U2, gas filling press for Argon, year 2007 RTVB-15/25ST, press outlet conveyor, year 2007 Fgeb Eowca Hpjpyqwjb UKL-35/25, tilt table, year 2007

Condition: good (used), Machine Description This machine is in very good condition. It was made in France. Specifications: Glass Thickness: 3 - 25 mm Minimum Glass Size: 80 x 120 mm Maximum Glass Size: 3000 x 3000 mm (can be larger) Speed: 0.4 - 4.2 m/min Dimensions: 5800 x 1600 x 2500 mm Weight: 2500 kg Fgjb Epyowig Awsqweb

Year of construction: 2021, Condition: ready for operation (used), Functionality: fully functional, Machine no longer required. Ideal dual sided protective film applicator. Feb Epov U Spboyqwjgb

Condition: refurbished (used), Year of construction: 2020, Functionality: fully functional, Tamglass HTF ProE 2136-CTS-20-L (iC) Glaston Furnace Computers/Software 2020 Glaston iControl upgr 2020 Glaston Furnace 1 PC upgrade 2023 Glaston Blower Upgrade 2020 Glaston Furnace Integrated Sca 2020 delivered year 2013 Febswinuhj Epyqwjgb • Thermal scanner upgrade delivered year 2014 • Air balance upgrade (AAB) delivered year 2019 • New Impellers (2 pcs) for blowers KSXMB-80-3 RD/LG • New Bearing units (2 pcs) for blowers KSXMB-80-3 RD/LG • Blower vibration monitoring system upgrade (BMONi) • Frequency converters for quenching blowers (S) TECHNICAL SPECIFICATION AND DATA TAMGLASS HORIZONTAL TEMPERING FURNACES Glass thickness range: 3.8...19 mm tempering Loading area: 3.8mm and over 2100mm x 3600mm Maximum glass size: ANSI Z97.1-1984 ECE R43 4.7 mm and over 2100 mm x 3600 mm (3900)* 1000 mm x 1500 mm 3.8 mm and over 2100 mm x 3000 mm - *Single sheets 300 mm longer can be tempered with reduced production rate Minimum glass size: 3.8mm and over 100mm x 250mm Maximum production rates with K = 100%, with clear float glass. 4mm 160 m2/h 5mm 135 m2/h 6mm 112 m2/h 8mm 84 m2/h 10mm 67m2/h 12mm 56m2/h 15mm 45m2/h 19mm 35m2/h In actual operation, the production rates reach 50-85% of the maximum and depend on the glass dimensions, edgework quality, and loading area utilization. Minimum distance of sheets from each other is 50 mm. Environmental conditions: Temperature 20…40 ºC Relative humidity < 80% Installed power at sea level: Heating and drive 464 kW Blowers 2 x 215 kW 430 kW Total 884 kW

Condition: used, Year of construction: 2019, machine/vehicle number: 1000032529, Power: 23.5 kW, travel distances: X-axis: 4160 mm, Y-axis: 2400 mm, Z-axis: 240 mm, with additional C-axis, rotation: 360 degrees, 40-station tool changer, separate control cabinet system, made by RITTAL, 12 suction cups and 15 tool holders, some equipped with tools Fgjb Epewav S Noyqwsb

Condition: refurbished (used), Year of construction: 2018, Functionality: fully functional, TAMGLASS HORIZONTAL TEMPERING FURNACE HTF Pro 2442-CTA-20 Glass thickness range: 3.8....19 mm tempering Loading area: 2440x 4200 mm Preheating time: from 20⁰C to 700⁰C is aprox. 2.5 hours Dimensions of the plant: Roller diameter: 95.25 mm Roller distance: 120mm Total length: 20.9 m Total height: 3.1 m Working height: 880mm Total width: 5.3 m+ aprox. 7m x 8m for blower room Fsb Eowinubepyqwsgb Main parts of the furnace: - A loading conveyor - A heating furnace - A cooling section - An unloading conveyor - A blower system with ductwork for the cooling sections - Electrical control panels, wiring and programmable control system

Condition: used, Year of construction: 2000, machine/vehicle number: 2083, Base area: approx. 3000x6000 mm, with cutting bridge, with 2 cutting heads, transfer crushing table, table size: approx. 3000x8000 mm, tilting table for manual loading Fgjbjwactyj Epyqwsb

Condition: used, Year of construction: 2007, Functionality: fully functional, TCGT GTW GW5025ZD series low-e tempering and bending cylindrical shapes, starting with Radius > 1200 mm. Fjb Epyqjwintwewsgb laminating with vacuums bag up to 7000 mm GMR Stock Place

Year of construction: 2023, Condition: used, Consisting of: Cleanroom access with 1-door, glazed, with SIEMENS control system and touch panel, as well as enclosure, integrated ceiling crane system, on 2 travel rails, mounted on vertical struts, bolted, with electric chain hoist, ABUS, and manipulator, HEGLA, type: VHG-500H, built in 2023, load capacity: 500 kg, extraction, temperature control, and vacuum traverse, HEGLA, built in 2023, max. load capacity: 250 kg Fsbewacrie Epyqwsgb

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Desic Filler The automatic desiccant filler machine performs the filling of spacer frames with desiccant. The machine is suitable for the filling of desiccant in aluminum spacers, stainless steel spacers and Warm Edge spacers (Chromatech Ultra, Thermi Feb Epyowinr Hjqwjgb

Condition: used, Year of construction: 2003, machine/vehicle number: 30-1712, Power: 165 kW, consisting of: material feed, ball roller table, vacuum traverse, gantry crane system, grinding unit, turning table, grinding unit, material discharge, gantry drilling unit, type: 2400T, glass washing machine, control unit with control system, made by SIEMENS, separate control cabinet system, made by RITTAL, monitoring monitor and water treatment system, built in 2015. NOTE: Maintenance required. Fgjb Eewacrvepyqweb

Condition: used, Year of construction: 1995, Functionality: fully functional, straight line edger Fsb Epyqswinryjwsgb 11 wheels

Condition: used, Year of construction: 2017, machine/vehicle number: 30-3200, Consisting of: material feed, ball roller table, portal feed around vacuum traverse, grinding unit, power: 117 kW, separate control cabinet with operating unit, control system, SIEMENS, turning table, grinding unit, power: 117 kW, material discharge, drilling and water jet unit, power: 58 kW, serial no. 3-3200-38, separate control cabinet system, RITTAL, with cooling unit, and washing system, TECWASHER, type: F.18-S-B2 B-CD, built in 2017, serial no. 30-3200-08, control system, SIEMENS, with TOUCHPANEL, attached extraction system, discharge table and video surveillance Fgeb Epjwav S Ajyqwjb

Condition: used, Bottero Variant 815BCS variable angle 0-45° CY 2004 Total overhaul 2022 Variant is the range of Bottero variable angle straight line edgers. The 8 models available within this range of machines allow working the flat edge of an angle varying up to 45° and removing the arris. Bottero’s vertical edge grinding and bevelling machines allow the highest quality results to be achieved when processing edges, thereby guaranteeing a perfect finish and allowing use in the most elegant applications, in which quality is considered an essential element. The vertical edgers and bevelling machines are designed to ensure maximum production and maximum reliability. The availability of numerous machine set-up configurations allows you to choose the right product for both simple and extremely advanced processing operations. Fgob Epewinrteyqweb

Year of construction: 2023, Condition: used, machine/vehicle number: 22230057, with roller support, material infeed, washing unit, make MALNATI, type: 2300TN, year of manufacture 2023, serial no. 22230057, power: 50 kW, attached extraction unit, separate control cabinet, discharge table, control make WEINTEC Fjbowactgo Epyqwjgb

Condition: used, Year of construction: 2008, Bottero produces a complete range of solutions for flat and penciledge two-sided grinding, which can satisfy the requirements of small, medium and large glass factories with fixed or flexible production, thanks to the vast possibilities of choice and configuration of the products. Bottero machines are ideal for processing structural glass, partition walls, shower cubicles, shelves, balustrades, steps and furnishing elements, providing productivity, precision and reliability over time to operate on multiple shifts Fgsb Epyewinrmoqwjb

Condition: used, Year of construction: 2000, Consisting of: Cutting/breaking table, make HEGLA, type: OPTIMAX 6032ES, weight: approx. 3500 kg, base area: approx. 3000x8000 mm, with cutting bridge and tilting table Fgebswactaj Epyqweb

Condition: used, Year of construction: 2005, MASTER 45 Fgob Eowinraopyqwsb Capacity: 400V-50Hz-15Kw PC Controlled Work Center with 5 controlled axis for milling, drilling, grinding, polishing, beveling, engraving for glass products. Description : Intermac CNC center 3 axis D100 tools max 4060x2300mm sheets, 5 axis cup wheels 3500 x1750mm sheets. Max thickness for edge finishing: 80mm Total dimensions: L8940xW4075xH2800mm (7200Kg)

Condition: good (used), Year of construction: 2017, Functionality: fully functional, combo: Heat soak test furnace 3000 x 1600 mm + Laminating furnace 3000 x 1600 mm Gas fired Fjb Epyovz Tgbjqwegb Vertical in vacuum bags to be connected to vacuum connector in the furnace 2 x trolleys included external size is 20ft sea container size L 6000 x W 2350 mm

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Gemy 6 is the straight edging machine with 6-cup wheels, with innovative design and technology. It executes high quality work on thickness up to 35 mm and is equipped with an NC that, among various functions, also automatically adjusts the speed of the machine according to to the thickness to be processed. Thanks to the use of ABS covers it proves exceptionally soundproof and safe due to the complete acoustic and electrical insulation. . Ergonomic and easy to use Multifunctional NC Central lubrication ABS covers Possible regulation of the amount of glass to be removed (0÷5 mm with a 0.25 mm step) Front regulation of the wheel that executes the back arrive Stainless steel casing and tanks Technical data: Workable glass thickness: 3 ÷ 35 mm Min. workable dimensions: with corner chamfering (15 mm) 45 mm Without corner chamfering 35 mm Max weight allowed per meter of conveyance: 200 kg/m and total load 350 kg Fgjb Epyqjwinq Aswjb Working speed 0.5 ÷ 5 m/min Pneumatic feed: pressure 6 bar Water tank: 1 x 360 liters Total power installed: Kw 16.5 Total length (L) 6700 mm Machine width (W) 1300 mm Total height (H) 2300mm Height of working plane ≈ 840 mm Total weight (with empty water tank): 2600 kg Numerical control RS150 Operator interface CN 23 Programmable control (PLC) Integrated in the NC Screen Liquid Crystal Display (LCD) Operative keyboard sensitive keys

Condition: used, storage rack system Fgebjwii Nmj Epyqweb 12 position

Condition: used, Year of construction: 2000, laminated glass cutting table Fgob Epowii Najyqwob

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Straight line edger Fsb Epyqjwii I Aswjgb 9 wheels

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, total length: 2,500 mm, total width: 2,000 mm, VSA-25/20D1 RTVB-11-20ST SSV-20 Feb Epysvyzatsqwegb Lisec VSA-25-20D1 S-IGL-1878