PrePressService

Condition: used, Year of construction: 2007, functionality: fully functional, ECRM MAKO 8 CTP — Specification | MAKO 8 Type | CTP 8-page Laser Technology | Violet 405 nm, single beam - 120Mw Compatible Plates | Violet photopolymer and silver halide Maximum Plate Size | 824 × 1,143 mm Minimum Plate Size | 254 × 254 mm Plate Thickness | 0.15 to 0.30 mm Resolutions | 1,800 to 3,556 dpi depending on the media Productivity | Up to 15 8-page plates/hour at 2,540 dpi Reported Repeatability | 0.025 mm typical over 6 consecutive separations Positioning Accuracy | ±2 µm with the Precision Drive System Image Scaling | 85 to 110% Workflow | TIFF 1-bit compatible via CtServer Output | Online connection to processor The machine therefore accepts a very wide range of formats, from 254 × 254 to 824 × 1,143 mm, which allows it to handle both small formats and genuine 8-page plates. Exposure/Mechanical Section The MAKO 8 uses a 405 nm violet laser. ECRM states that the single beam can be calibrated according to the sensitivity of the plate. The maximum resolution of 3,556 dpi also allows for the use of demanding screening techniques, including stochastic screening. Bodpfjzxzm Tsx Al Usdg The system is mechanically quite interesting: the plate is positioned on a pin-bar registration system and then moved under the laser head by the Precision Drive System. The documentation specifies a positioning control of ±2 µm. The registration system is interchangeable to accommodate notches corresponding to the presses used, which aims to improve plate/press registration and reduce setup time. Dimensions and Installation Width: 1,066.8 mm Depth: 2,448.6 mm Total Height: 1,892.3 mm Weight: 409 kg Power Supply: 100–240 V single-phase, 50/60 Hz Maximum Power Consumption: 250 W / 3 A Thermal Dissipation: 850 BTU/h Operating Temperature: 17 to 30 °C Relative Humidity: 45 to 65%, without condensation

Condition: good (used), Year of construction: 2016, Technografica printing plate baking line, 1550 mm, year of manufacture 2016, plate developing machine, manufacturer Techno-Grafica, type TPP9001M, year of manufacture 2002, 2 transfer tables, manufacturer Techno-Grafica, model CTA1550, year of manufacture 2002, baking oven, manufacturer Techno-Grafica, model EBO1550, year of manufacture 2002, degumming unit, manufacturer Techno-Grafica, model SPG1550, year of manufacture 2006, plate stacker, manufacturer Techno-Grafica, model PSTHS1550. Bdjdezr Haxspfx Al Ujg

Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP. Bdjdezquq Aepfx Al Ueg MACHINE IS READY TO WORK.

Condition: used, Plattenbelichtungssystem / CTP Plate Maker Heidelberg TopSetter 102 Bsdezgfvhopfx Al Uedg Serial-No. 2310 Year 2001 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2011, functionality: fully functional, Glunz & Jensen Quartz 85III, 2011 online plate processor for thermal metal plates Bdodpfx Aszf Ivzel Ueg 85 cm input width, incl. chiller cleaned & tested All offers subject to prior sale

Condition: used, Kompaktanlage zur Herstellung v. Stempeln, Eindruckklischees und Photopolymerdruckplatten. Compact system for the production of stamps, imprint clichés, and photopolymer printing plates. Es können sowohl Flüssigphotopolymer (Resin) als auch Photopolymer-Plattenmaterial verarbeitet werden. Both liquid photopolymer (resin) and photopolymer plate material can be processed. Belichter Klischeeherstellung / Photopolymer Platemaking AZ System 2000 Serial-No. 277 Plattenformat / Plate Size max. 23 x 33cm Mit 9 Arbeitsprogrammen Maschinendaten: Maße / Size Breite / Width 52cm, Tiefe / Deep 47cm, Höhe / High 95cm Gewicht / Weight ca. 62kg Bdodpsza H Srofx Al Ujg Elektrischer Anschluss / Eletric supply 220Volt, 1,3 kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2005, Format: 830 x 660 mm Bedpfx Ajyxquiol Ujdg Equipment: Agfa Azura CX Plate Processors Year 2020 Multi-cassette Autoloader with three cassettes Screen MA-L4300 II Year 2020 with Screen EP-B101 Year 2022 Network InterfaceBox for all PT-Rxxx Stacker PST 26

Condition: used, Plattenbelichtungssystem / CTP Plate Maker ECRM DPX2 Year 2008 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bdedpfx Aoytpmljl Usg

Condition: used, Thermal Laser CTP Amsky Ausetter T 424 with only 7066 Plates produced. Thermal Laser CTP Amsky Ausetter T 424 Thermal Belichter / Thermal Laser Bdsdpjyllbpofx Al Usg Plate Size min. 300 x 400mm - max. 660 x 800mm 2400DPI  24 Channel Laser Plate Thickness 0.15 - 0.30mm Manual Plate Loading Include RIP and Compressor Geschwindigkeit / Speed max. 15 Plates/per hour Nur 7066 Platten Belichtet / Only 7066 Plates produced Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2021, Offered Equipment • Manufacturer / Model: AV Flexologic COSMOLINE 900 • Year of manufacture: 2021 • Serial no.: 051121-1059 • Condition: Excellent – the machine was in active use up to the company closure and can still be inspected under power. Why choose the COSMOLINE 900? The COSMOLINE 900 is an inline washout and drying system for photopolymer plates. It is engineered to simplify and accelerate plate processing while delivering consistent, high-quality results. ✅ Fully automated inline operation – the operator loads a plate, and the machine automatically transports, washes, and dries it. ✅ Superior cleaning – robust water jet with soap mixture, multiple adjustable rotating brushes, plus a large counter-rotating brush for maximum cleaning coverage. ✅ Reliable finishing – an additional brush for removing residues; hot air drying leaves plates clean and ready for immediate use. ✅ High productivity – sensors measure plate dimensions for optimized processing, ensuring stable and repeatable results. ✅ Environmentally friendly – standard centrifugal cleaning system; optional membrane filter available to separate polymer from water. ✅ Flexible & customizable – machine settings can be adapted to individual production requirements. This system is ideal for label and packaging converters seeking dependable, spotless, and perfectly finished flexographic plates with minimal operator effort. Technical Specifications • Maximum plate width: 900 mm • Maximum plate height: 1,200 mm • Standard centrifugal cleaning system (sustainable solution) Bodpfxow Tc Upj Al Ujdg • Optional membrane filter for polymer recovery (not required for letterpress plates)

Condition: good (used), Year of construction: 2011, Technical Specifications (Spark 2530) Bjdpjw Tc Uiofx Al Uodg • Plate size: up to 25” x 30” (635 x 762 mm) • Resolution: 2,000–4,000 ppi (up to 10,160 ppi for security) • Software: Grapholas CDI, supports 1-bit TIFF & LEN files • Dimensions: W 1,600 mm · D 870–1,180 mm · H 1,070 mm • Weight: 1,000 kg

Condition: good (used), Year of construction: 2013, Machine Summary Compact, proven digital plate imager for label & narrow-web plate facilities. Handles a wide range of materials (digital flexo, chemistry-free films, digital letterpress on film/metal base, and screen) in the popular 24″×20″ (609×508 mm) format. Equipped with EasyClamp for quick, convenient loading onto the vacuum drum. Technical Data (from seller’s dossier) • Model: Esko CDI Spark 2420 — Optics 7.5 • Maximum plate size: 609 × 508 mm (24″ × 20″) Bdedpfew Tc Tfox Al Ujg • Power supply: 220–240 V, 1/N/PE, 6 A, 50/60 Hz • Machine dimensions (W×D×H): 1160 × 700 × 1050 mm | Weight: ~320 kg • Serial number: 107199 | Year of manufacture: 2013 • Equipment/Features: EasyClamp vacuum drum loading Condition & Viewing • From a company closure; machines were in active use until closure and can be demonstrated in operation by arrangement.

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) • Application: Processing and developing photopolymer plates • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops • Condition: Very well maintained, immediately ready for operation Bedewv Eazjpfx Al Ujdg

Condition: used, Druckplattenbelichter - Plate Exposer O.M.S. COPYSTAR 4050 Serial-No. 93-2023 Format / Size max. 400 x 500mm Voltage 230V AC - 2800W Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bjdpfx Aljv Am Rvs Usdg

Condition: used, Year of construction: 1996, machine/vehicle number: 96010095, Belichter / Exposer Serial-No. 96010095 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bdodpfx Alotzc Ikj Ujg Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2007, machine/vehicle number: 1369, Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-SystemYear 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Bedpfxjh Aya Ij Al Uodg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, Druckplatten - Entwicklungsmaschine / Plate Processor AZ FEYear 1999 - Serial-No. XX158 Working width max. 300mm Online-Video-Inspection by Skype-Video Bdedpfx Ash Ax R Usl Uog We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video Bedpfx Aeh Axk Ijl Usdg We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test