Ledinek Maschinen und Anlagen GmbH

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min Rodoyyzcmopfx Aaaor - Feed motor: 10 kW - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: ready for operation (used), hydraulic workpiece length: 300–3000 mm smooth speed adjustment Rsdpfx Ajyyy Sgeaajr weight: 130 kg power supply: 380V year: 2003

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth Redpfx Asyyy Iujaajr - 2 outfeed pressure rollers - Smooth feed roller – Bottom section: - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 7133 TECHNICAL SPECIFICATIONS - Max. working width: 220 mm - Max. working height: 120 mm – 5 spindles: 1) Bottom horizontal, 220 mm, 5.5 kW 2) Right vertical, 120 mm 3) Left vertical, 120 mm; spindles 2 & 3: 11 kW 4) Top horizontal, 220 mm, 11 kW 5) Bottom horizontal, 220 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic pressure hold-downs - Top: 4 powered, gear-driven feed rollers (including 2 double rollers) - Top: 1 double outfeed roller, smooth, rubber-coated - Bottom: powered outfeed roller, rubber-coated - Feed on Cardan shafts - Variable feed speed adjustment - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction nozzle diameter: 4 x 120 mm, 1 x 140 mm - Dimensions (L/W/H): 3500 x 1550 x 1400 mm - Weight: 1750 kg ADVANTAGES – Equipped with 5 heads – German-manufactured – Not repainted – Used planer, in very good condition Net price: 43,900 PLN Rodpfx Aaoyyy Ibsajr Net price: 10,450 EUR (according to exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6904 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 5.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm (spindles 2 and 3), 7.5 kW 4) Top horizontal: 230 mm, 5.5 kW 5) Bottom horizontal: 230 mm, 5.5 kW 6) Universal: 230 mm, adjustable 360°, 5.5 kW - All spindles adjustable up/down, right/left - Spindles 1, 2, 3, 4, 5 equipped with electric brake - Spindle diameter: 40 mm - 5 top infeed, toothed feed rollers - 4 top outfeed, smooth rubber feed rollers, including 2 double rollers - 1 bottom rubber feed roller - Feed via Kardanic shafts - Pneumatically pressed rollers - Stepless speed feed adjustment - Feed motor: 4 kW - Operating pressure: 6–10 bar - Electric thickness adjustment - Lifting motor: approx. 0.55 kW - Central table lubrication - Infeed table length: 1970 mm - Extraction ports: 2x140 mm, 4x135 mm - Dimensions (LxWxH): 4430x1830x2000 mm - Weight: approx. 3500 kg ADVANTAGES – German-made, WEINIG brand – 6-head (moulder) – Complete technical documentation (DTR) – Universal spindle – Used planer/moulder, very good condition Net price: 82,900 PLN Net price: 19,738 EUR Net price calculated at 4.2 PLN/EUR Rodpfxoyyy Hds Aaajr (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 6765 TECHNICAL DATA - max. working width of element: 230 mm - max. working height of element: 160 mm Number of spindles: 4: 1) lower horizontal, 230 mm, 5.5 kW 2) right vertical, 160 mm, 5.5 kW 3) left vertical, 160 mm – electrically adjustable left/right from the control panel, 5.5 kW 4) upper horizontal, 230 mm – electrically adjustable up/down from the control panel, 7.5 kW Redpfx Aeyyy E Heaajr - all spindles adjustable up/down, left/right - spindle diameter: 40 mm from the top: - driven infeed rollers, geared, 6 pcs (incl. 2 double rollers) - driven outfeed rollers, rubber-coated, 2 pcs from below: - infeed roller, driven, geared, metallic, swiveling in the lower table - outfeed roller, driven, metallic, smooth - pneumatically adjustable rollers - length of infeed table (with pneumatic feeder): 3390 mm - possible operation without activating the pneumatic feeder; the table is height-adjustable - central lubrication - electric thickness adjustment - variable feed speed adjustment - feed via cardan shafts - feed motor: 4 kW - enclosed in cabin - extraction port diameter: 4 x 120 mm - dimensions (L x W x H): 7000 x 1950 x 1700 mm - weight: approx. 3000 kg - suitable for wet and dry wood - pneumatic feeder on the infeed table - second-hand planer, in very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum batten length: 85 mm - Minimum batten width: 180 mm - Maximum batten width: 845 mm - Minimum batten height: 10 mm - Maximum batten height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical top spindle 2.2 kW 2) Horizontal bottom spindle 2.2 kW - Right side: 1) Vertical bottom spindle 2.2 kW 2) Vertical top spindle 2.2 kW 3) Horizontal bottom spindle 2.2 kW - Spindles adjustable up/down, right/left - Material hold-down: 2 pcs - Stepless feed speed adjustment: 0–10 m/min - Spindle diameter: 5x100 mm - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum batten width: 130 mm - Maximum batten height: 100 mm - Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife cutterheads mounted on top and bottom spindles - Spindle diameter: 40 mm - Shaper cutters mounted on right and left spindles, max diameter 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication by oil pump - Spindle diameter: 4x125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Manufactured in Poland - 5 spindles - Unpainted - Very good condition - Used production line - High quality, low price Rsdpsyyy Egjfx Aaasr Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalog number: 7888 TECHNICAL DATA Max. planing width: 410 mm Max. thickness of workpiece (double-sided): 200 mm Max. thickness of workpiece on side heads (four-sided): 140 mm – Top: Kickback fingers / anti-kickback devices 2 pull-in feed rollers, geared, spiral 2 rows of segmented pressure rollers Geared, spiral feed roller Pressure system 410 mm planing shaft, 4-knife – 5.5 kW Pressure system Smooth, outfeed feed roller – Bottom: Guide rail – present Adjustable infeed table with sliding roller 410 mm planing shaft, 4-knife – 4 kW 2 smooth sliding rollers – Rear: 2 side spindles 1) Right vertical 140 mm – 3 kW 2) Left vertical 140 mm – 3 kW Spindle diameter: 35 mm Spindles adjustable up/down and right/left Redpfx Aaoyyyunsaor Spindles positioned alternately 6 feed speeds Dust extraction outlet diameters: 2x100 mm, 1x150 mm, 1x170 mm Dimensions (L/W/H): 2170 x 1300 x 1260 mm Weight: 1603 kg ADVANTAGES – Suitable for wet and dry timber – Ideal for processing beams, flooring, etc. – Made by the German brand BAUERLE – Used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Planer and moulder Rjdjyyyp Eepfx Aaajr

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, For sale: 5-head moulder / four-side planer PAOLONI MASTER 23. Rjdpjyyylgefx Aaaer Condition: Good. Fully functional and ready for work. Nameplate data: Year of manufacture: 1999 Power supply: 380V / 50Hz / 3 phase Power: 42 kW Weight: 5,500 kg Working parameters: Working width: up to approx. 230 mm Working height: up to approx. 120 mm Number of spindles: 5 (5 heads) Spindle diameter: Ø40 mm Spindle speed: up to approx. 6,000 rpm Feed speed, adjustable: up to 30 m/min The machine is intended for the production of wooden components – planing and profiling with high repeatability. Suitable for drawer sides, etc. -Control from the operator panel (control panel on the machine) -Convenient starting/stopping of units (heads) -Emergency STOP Possibility to inspect the machine on site. Loading with forklift or by own means. Location: Elbląg / Warmian-Masurian Voivodeship

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm Rodeyyyi Espfx Aaajr - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 106531, working width: 230 mm, power: 75 kW (101.97 HP), input current: 163 A, table width: 230 mm, Equipment: cabin, Rarity! Four-side planer Weinig Powermat 500 with splitting unit!! (the last two spindles fitted with saw blades, anti-kickback device, splitter wedge) for sale complete with all accessories. The machine has 7 spindles/shafts (bottom / right / left / top / bottom / right / left). We used the line to produce middle layers for three-layer board manufacturing. The machine is in perfect working order. The machine is still in operation and can be demonstrated. Redpfxeyyw Ufs Aaaer Further technical details will follow in the next few days...

Condition: ready for operation (used), Year of construction: 1970, operating hours: 1,362 h, functionality: fully functional, machine/vehicle number: 9286, planing width: 600 mm, Planer machine Kupfermühle Rjdpfx Aaeyyvuweaor 5 spindles: bottom / top / right and left / bottom We have produced castle floorboards with this machine, and it was operational until the end. The machine can be demonstrated. Due to its age, it is sold without warranty or guarantee.

Condition: used, Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. uper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Redpfx Aoyyqnlsaasr Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Spindle configuration 1st spindle: Planing spindle – 4 kW 2nd spindle: Right vertical spindle – 5.5 kW 3rd spindle: Left vertical spindle – 5.5 kW Rsdpfx Aaeyym Nreaor 4th spindle: Top horizontal spindle – 4 kW 5th spindle: Bottom horizontal spindle – 4 kW 6th spindle: Universal spindle – 4 kW Spindle speed: 6,000 rpm Spindle diameter: 40 mm Working area Working width: 25–230 mm Working height: 10–120 mm Min. workpiece length: 450 / 630 mm (depending on version) Feed Infinitely variable: 5–25 m/min Feed rollers Ø 140 mm Infeed table 2,000 mm Tooling ranges Vertical spindles: 100–180 mm Horizontal spindles: up to 180 mm Max. profiling depth, vertical: 40 mm Features Manual table and central lubrication Robust industrial design, smooth operation and high precision

Condition: excellent (used), Year of construction: 1992, Weinig Hydromat 22 BL planer with destacker Year: 1992 Feed: 60 m/min Heads: 1. lower – 11 kW 2. right side – 7.5 kW 3. left side – 7.5 kW 4. upper – 11 kW 5. lower – 7.5 kW 6. upper – 7.5 kW 6 feed rollers in the table Rjdpsyymqvofx Aaaor Feed motor – 15 kW Planing width – 170 mm Planing height – 120 mm Machine mounted on an elevated platform.

Condition: used, Year of construction: 1996, functionality: fully functional, Four-Sided Planer MAGIC Forma F218 Moulder Specification: • Condition: used, after a full technical inspection • Manufacturer: MAGIC • Model: Forma F218 • Working width: 180 mm • Working height: 120 mm • Spindle motors: 4 x 3.0 kW (separate motor for each head) • Total power: 13.5 kW • Electric height adjustment for planing • Manual width adjustment for planing • Adjustable vertical spindles up/down (as on a spindle moulder) • Machine equipped with a complete set of heads and a scoring unit • Feeder rack in front of the first head • Pneumatic feed roller pressure • Infeed table length: 250 cm, width: 20 cm • Table lubrication pump • Infinitely variable feed speed on variator, range 0-25 m/min • Soundproof enclosure • Original paintwork • Weight approx. 1200 kg • Year of manufacture: 1996 • Complete set of documentation in Italian and head wrenches included • Overall dimensions: 360 x 136 x 150 cm (L x W x H) Additional Information: • Perfect, factory technical condition after comprehensive inspection • Presented images show the actual condition of the listed machine • Possibility to connect and test the machine on site • Price listed in the auction excludes VAT and transport costs Rsdpfeyyc S Asx Aaajr Financing and Transport: • We arrange transport by MDD fleet, courier services or third-party carriers • Financial support available in the form of leasing or lease-loan

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Spindle Power: Bottom spindle: 4 kW Right spindle: 7.5 kW Left spindle: 7.5 kW Top spindle: 7.5 kW Bottom spindle: 4 kW Universal spindle: 4 kW Planing width: 220 mm Planing height: 120 mm Max. spindle speed: 6,000 rpm Spindle diameter: 40 mm Feed rate max.: 22 m/min (infinitely variable) Feed motor: 3 kW Main motor: 7.5 kW Pneumatic top pressure Redpfx Asyybdweaasr Feed via cardan drive Motorized adjustment (planing width and height) Infeed table length: 2,000 mm Integrated lubricant pump

Condition: used, Year of construction: 1995, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 1,500 mm, number of spindles: 8, Equipment: cabin, Weinig Unimat 23e Moulding machine (8 spindles) Description; Year of construction 1995 Dimensions of the infeed table: 1500 mm Number of axes: 8 Spindle Sequence: Bottom-right-left-right-top-bottom-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 6-24m/min Groove bed: No (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Rjdpfx Aaoyx Tiieajr Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2015, WEINIG ISEL 3020 XYZ CNC TEMPLATE MAKER TOOL FOR PROFILE GRINDER TECHNICAL DATA: CNC ROUTER WITH 3 AXIS MOVEMENT CLAMPING T SLOT TABLE CADCAM TEMPLATE MAKING SOFTWARE INCLUDED PC, SCREEN AND KEYBOARD INCLUDED FULLY ENCLOSED WORKING AREA WITH LOCKING DOOR SYSTEM LARGE CAPACITY WORKING AREA LOW VOLTAGE INTERNAL LIGHTING SET OF MOTOR COLLETS AND SPANNER SET TRAVEL AREA 300 x 200 MM Z AXIZ TRAVEL 90 MM SPINDLE SPEED 11000 & 25000 RPM Rsdpfx Aoyxxnwsaaer DIMENSIONS 650 MM (L) x 610 MM (W) x 715 MM (H)

Condition: excellent (used), functionality: fully functional, Casadei C4 Four-Sided Planer Working width: 220 mm Working height: 120 mm Number of spindles: 4 Spindle configuration: Rsdsyxmnlopfx Aaasr 1. Bottom – 4 kW 2. Right – 4 kW 3. Left – 4 kW 4. Top – 4 kW Spindle speed: 6000 rpm Feed speed adjustable via variator: 4–21 m/min Tool size: 125–140 mm Feed driven by cardan shaft Technical documentation

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom spindles diameter 40mm Redeyxltgjpfx Aaaor variable regulated feeder feeder with cardan pneumatic pressure of feeding rolls table lubrication

Condition: ready for operation (used), working width 230mm working height 120mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation variable regulated feeder Rjdpfx Asyxltajaaor spindles speed 6000 RPM

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions Rsdpfjyxlr Nsx Aaaer electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table

Condition: ready for operation (used), working width 230mm working height 120mm 4 spindles two axes spindles regulation spindles diameter 40mm dimensions adjusted from panel spindles delta/star start Rodpfx Ajyxlrpoaajr two feeding speed table lubrication year 1998