Doppstadt Umwelttechnik GmbH

Condition: good (used), Year of construction: 2022, operating hours: 600 h, Functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Dq0Oer Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: used, Year of construction: 2019, operating hours: 2,133 h, Functionality: unexamined, Equipment: Basic package Inventhor Type 6 - Load-sensing system - Fuel tank 500 liters - Longitudinal belt: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24 V electric control - additional electric pump to operate the following functions when the engine is stopped. - Raise/lower/bend rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper," - Radio remote control complete Dq0Nuj - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Tool box - Acoustic start-up warning - Doppstadt telematics system - Without diesel engine - Without shredding system - Without chassis unit - Without rear conveyor - Paint finish: RAL2011 deep orange Additional equipment: Drivetrain 260 kW - EV 2-axle fifth wheel chassis unit Shredding system size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: good (used), Year of construction: 2020, operating hours: 1,973 h, Equipment: Basic package Inventhor Type 6 - Roller drive via planetary gear 260 kW - VARIO load sensing system - Fuel tank 500 liters - Longitudinal belt: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24 V electric control - Additional electric pump for operating the following functions when the engine is not running: *Raise/lower/fold rear belt *Open/close comb flap *Open/close comb *Raise/lower folding hopper - Radio remote control complete - large GRP side maintenance doors - maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - hydraulically reversible fan wheel - three-sided loading protection - folding funnel - fire extinguisher - maintenance ladder - tool box - acoustic start-up warning - Doppstadt telematics system - without diesel engine - without shredding system - without chassis unit - without rear conveyor - paintwork: RAL 2011 deep orange Additional equipment: Drivetrain 310 kW - EV 2-axle fifth wheel chassis unit Hydraulic drive Dq0Njl Additional hydraulic connection 35 - 80 l/min Shredding system size L-C3 600/4-30Z Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: good (used), Year of construction: 2023, operating hours: 60 h, Functionality: unexamined, Equipment: Methor "hook lift" basic package - 24 V electric control - maintenance-friendly engine compartment with LED light - folding hopper with position sensor and automatic control - hydraulically reversible fan wheel - acoustic start-up warning - paintwork: RAL 2011 deep orange Additional equipment: 2Utgg0Vok Hook lift in accordance with DIN 30722-1 (Germany) Crushing system size L (8 teeth) Three-phase motor 200 kW-EUROPA + electric pump Radio system hook lift large Rear conveyor 6.9 m Frame for overband magnet Overband magnet Additional hydraulic connection 70 l/min

Condition: used, Year of construction: 2021, operating hours: 200 h, Functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Crushing system size L (8 teeth) Frame for overband magnet Overband magnet Roller quick-change system on the roller Shtos8Roo Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running

Condition: good (used), Year of construction: 2020, operating hours: 590 h, Functionality: unexamined, Equipment: Shm79Hp3I Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: good (used), Year of construction: 2020, operating hours: 881 h, Functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Dqxcsv Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2021, operating hours: 4,540 h, Functionality: unexamined, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW – VARIO - Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Frame for overband magnet Overband magnet 2 t permanent Dqxcrd

Condition: used, Year of construction: 2017, operating hours: 6,584 h, Functionality: unexamined, Equipment: Basic version DW 3060-F "Buffalo" (carrier machine) Dqxcmn Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system including ABS and lighting in accordance with EC directive 50 mm EC towing eye including slip-on shoe Hydraulically adjustable support leg Splash guard (inside and side fenders) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, meets EUROMOT IV emissions standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Rear conveyor: conveyor length 5,500 mm, conveyor width 1,200 mm, hydraulically foldable, with anti-magnetic middle section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Reversing of the roller using an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Additional equipment: Hydraulic drive SHREDDING SYSTEM SIZE "L" 600/4 KPL. Additional hydraulic connection 70 l/min Radio remote control Comb extension size "L" limiter Mounting comb extension limiter size "L" Overband magnet for rear belt Frame for overband magnet Moistening device

Condition: good (used), Year of construction: 2021, operating hours: 2,954 h, Functionality: unexamined, Equipment: Basic package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, 80 km/h road approval Braking system including ABS and lighting in accordance with EC directive Tires 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support feet Splash guard (inside fender and side) Rafqohyxa Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm meets EUROMOT V emissions standard Additional hydraulic connection 20 l/min Load-dependent control of material feed including automatic scraper floor reversing Separate drive of feed roller and scraper floor (twin drive) Fuel tank 2 x 450 Liter Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 freely swinging cast steel flail holders and replaceable flail tips Standard: flail tip Streusel plus Baffle plate with teeth Centrally arranged lubrication strips Electric pump for operating the cylinder functions (e.g. Raise/lower support feet and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is stopped 24-V electric control Separate control box at the rear of the machine Hydraulically foldable fine shredding basket Multimesh (mesh size between 30 - 280 mm, gradation on request) including 1-part rear flap Rear conveyor: conveyor length 7,500 mm, conveyor width 1,500 mm, discharge height 5,200 mm hydraulically foldable and lowerable from 39 degrees to 30 degrees, including anti-magnetic middle section Lower conveyor: conveyor length 3,800 mm, conveyor width 1,400 mm Moistening device for external water connection Scraper floor with 71 strips Wear protection in the drum area Reinforcement plates on the filling funnel (made of wear-resistant steel) on both sides for Side wall Radio remote control complete Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL 2011 deep orange Additional equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protection plate Light package: engine compartment and rear conveyor

Condition: ready for operation (used), Year of construction: 2021, operating hours: 500 h, Functionality: unexamined, Basic package Methor chain - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding hopper with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Crushing system size L (8 teeth) Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on machine Additional electric pump for operation when the engine is not running Dqwyo7

Condition: ready for operation (used), Year of construction: 2022, operating hours: 207 h, Functionality: unexamined, Basic package Methor chain Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Paint: RAL 2011 deep orange Special equipment: Crushing system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Dqwygf Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting

Condition: used, Year of construction: 2021, operating hours: 1,345 h, Functionality: unexamined, Basic package Methor chain Track chassis including 2 driving speeds Chain 400mm 3-bar Dqwx7D Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Irrigation Crushing system size M (26 teeth) Roller quick-change system on the roller Roller quick-change system on the machine Frame for overband magnet Overband magnet

Year of construction: 2016, Condition: repair required (used), Functionality: unexamined, HS 800 basic package Spiral shaft screen deck AA209-150 Q3Juxr07O Special paint finish: Green

Year of construction: 2021, Condition: repair required (used), Functionality: unexamined, Basic package Selector 800 Lower belt BB 1350 mm AA 6.4m -profiled belt- SPIRAL SHAFT SCREEN COVER AA254-150 - 16 shafts Dqwxul

Year of construction: 2016, operating hours: 8,997 h, Condition: ready for operation (used), Functionality: fully functional, Basic version SM 620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting in accordance with EC directive 50 mm EC towing eye, including slip-on shoe Hydraulically adjustable support feet Splash guard (inside and side fenders) Tires 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 90 kW at 2,000 rpm, meets EUROMOT IIIB / Tier 4i emissions standard Hydraulically reversible fan wheel on water and oil cooler Complete engine unit can be swiveled out Fuel tank 300 liters Filling funnel 5.0 m³ capacity Hydraulically foldable side belt: belt length 5,500 mm, belt width 1,000 mm Hydraulic foldable rear conveyor: conveyor length 5,500 mm, conveyor width 1,000 mm Hydraulic support cylinder between side and rear conveyor Qxr08Ur0Q Emergency stop switch on side and rear conveyor Load-dependent controlled material feed from the conveyor floor to the screening drum Infinitely adjustable screening drum speed from 0 - 20 rpm Infinitely adjustable hopper conveyor speed from 0 - 0.17 m/s Switch box at the rear of the machine with the following functions: emergency stop switch, folding the rear conveyor in and out, folding the side conveyor in and out, folding the side conveyor in and out, bending the side conveyor and load control +/- Hydraulically foldable cleaning brush with individual brush elements and spring tines Centrally arranged lubrication strips 24 V electric control Underrun protection at the rear Side impact protection at the front (reinforced version) and on both sides of the rear Hydraulic quick coupling between the rear conveyor and the machine Acoustic start-up warning Paint finish: RAL2011 deep orange Basic version without screening drum Additional equipment: Additional hydraulic connection 20 l/min – DM Additional hydraulic connection 40 l/min – DM Magnetic roller for side belt Rear belt 3m with stone unwinding belt Wind sifter on 3m HB with 1.5m stone unwinding belt