Bed Slats Rails

Condition: used, Year of construction: 1977, Max. pressing length: 2550 mm Bodpoygm A Defx Abpscu Max. pressing width: 1200 mm Specific pressing pressure: 2.7 kg/cm² Total pressing pressure: 80 t Press opening width: 400 mm Heating plate material: gold anodised Operation: rotary switch Number of pressure pistons: 4 pcs Safety tear-off cable: Yes Condition of heating plate: good Weight approx.: 3600 kg Storage location:

Condition: used, Year of construction: 1991, Pressing area 1350 x 2550 mmTotal pressing force 900 kN (=90 MP)4 cylinders, 90 mm diameter x 400 mm stroke and press chamber height2 electro-combi heating plates 2550 x 1350 mm, gold anodizedIncl. Joos ABS safety systemElectronic temperature control R 3.1CE version Bcjdpfx Aboyf Eu Aspou Storage location: Supplier

Condition: like new (used), shelf length: 3500 mm; shelf width: 1300 mm; pistons with seals replaced; number of pistons: 10; piston diameter: 85 mm; water heating; weight: 6100 kg Bcjdpfx Abjyfr T Espsu

Condition: used, Year of construction: 1978, Max. pressing length: 2500 mm, max. pressing width: 1250 mm, total pressing force: 80 t, specific pressing pressure: 2.5 kg/cm², press opening height: 400 mm, heating plate material: gold-anodized, operation: push-button control, swivel switch: yes, number of ram cylinders: 4 pcs., safety treadle strip: yes, weight approx.: 3500 kg, dimensions: 2900 x 1420 x 1920 mm, total connected load: 17.5 kW. Location: Nattheim Bjdpfxoyffrbj Abpscu

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, overall weight: 3,750 kg, pressing force: 70 t, opening width: 450 mm, cylinder diameter: 70 mm, number of cylinders: 6, TECHNICAL DETAILS Press size: 3,100 x 1,300 mm Opening: 450 mm Number of cylinders: 6 Cylinder diameter: 70 mm Max. pressing force: 70 t Bsdpfx Abeydvmgjpocu Pressure: 2 kg/cm² MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,600 x 1,800 x 2,100 mm Weight: 3,750 kg Electric heating: 19.6 kW, max. 120 °C EQUIPMENT Documentation

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 13939, total width: 1,520 mm, total length: 3,550 mm, total height: 2,000 mm, type of input current: three-phase, temperature: 120 °C, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 400 bar, We are offering this used OTT Stabil-3013 veneer press, year of manufacture 1984. Model: Stabil-3013 Machine number: 13939 Rated voltage: 380 V Current type: AC • Pressing area: 3,000 × 1,350 mm • 6 cylinders • Interchangeable aluminium plates • Protective film Bodpoyc Hyzjfx Abpocu Frequency: 50 Hz Year of manufacture: 1984 If you have any questions or need more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2025, pressing force: 122 t, This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Additional equipment • Mylar Foil Attached to Upper and Lower Press Plates • Electronic Flatness Control (EFC) for Incorrect Loading Protection Machine Benefits Technical Machine Benefits • Dimensions of heating plates: 3000 x 1300 mm • Number of heating plates: 2 pcs • Number of levels: 1 • Level opening: 370 mm • Max temperature of heating medium: 120°c • Working temperature: 70-90°c • Installed electrical heating power: 18 kw • Operating voltage: 400 v- 50hz- 3 ph Extra Information Features: Touch Screen SIEMENS 4.3 Inch TFT Digital Press Timer Digital Temperature Controller Digital Working Pressure Controller Day/Week Timer for Heating Switch-On Time Automatic Hydraulic Pressure Calculation Error Display and PLC Control Save and Recall up to 200 Work Programs Pre-Press Pressure and Time Settings Safety Devices: Two-Hand Release with Safety Circuit Safety Rip Cord around the Machine Safety Support for Lower Press Table Protective Plate for Rack/Gear Safety Instructions Sticker CE Standard Compliance CE Declaration of Conformity Bsdpfeyan Sgex Abpscu Special Processing of Solid Steel Heating Plate Surface Switching Off Left Cylinder Row

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Bcjdeyalmbjpfx Abpou Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: ready for operation (used), Year of construction: 1998, This ITALPRESSE DS 130 was manufactured in 1998. A robust veneer press featuring a motorized infeed table with a PVC belt and an automatic loading system for efficient panel handling. It boasts a maximum total lifting force of 110 tons and a heating plate size of 3500 x 1400 mm. Ideal for high-quality veneering processes. Contact us for more information about this machine. Additional equipment • Motorized infeed table with PVC belt • Motorized loading table for manual assembly of the panels and automatic loading into the press on the 3500 mm side • Heating plates made of solid steel, drilled and machined on all sides • Automatic loading and unloading of the panels on the 3500 mm side Machine Benefits Technical Machine Benefits • Maximum total lifting force: 110 tons • Opening: 140 mm • Power supply: 400 volt eu / 50 hz / 3 ph. + g • Electrical boiler for thermal oil: 18 kw • Devices for adjusting the working height for flatness on all uneven floors // devices for adjusting the belt tension and centering with foot switch • Construction made of assembled and welded fe430 steel beams • Cnc-machined structures for three-dimensional parallelism Bcjdpoyall Rjfx Abpeu • Hydraulically controlled planarity with 4 racks and pinions • Protective nets and safety devices in accordance with ce regulations • Leveling devices at the base of columns for uneven floors Extra Information Refurbished - without warranty Control panel with electric pressure gauge, buttons, and control switches Lifting hooks for transport by crane

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Bcsdjx U Tv Ijpfx Abpsu • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm²

Condition: like new (used), shelf length: 3000 mm shelf width: 1300 mm number of pistons: 6 year of manufacture: 2004 water heating weight: 3900 kg 400 V gap clearance: 400 mm Bodpfxox Thnis Abpocu CE marking

Condition: used, Year of construction: 1995, Used Machine Year of manufacture: 1995 Features and technical data: - Total pressing force: 70 t - Press area: 2500x1300 mm - With gold anodized plates in good condition - Press chamber height: 400 mm - 4 cylinders, diameter 80 mm - ABS safety system, can be deactivated Bedpfx Absx Enr Sspscu - Emergency cord - Extendable support, left side - Swivel button operation - Hydraulic unit at the bottom - Cleaned and assembled/pressed by ELKOM staff Dimensions: 2900 x 1480 x 2050 mm Weight: 2950 kg Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Equipped with Busse aluminium energy-saving plates (the spots visible in the pictures are only visual; the plates are in perfect condition) Total press capacity: 80 t Press cylinders: 4 x 90 mm Opening width: 400 mm Bcjdpfox Enp Rsx Abpsu Weight: approx. 3100 kg Total length: 2610 mm Total width: 1240 mm Total height: 1890 mm Motor power rating: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Availability: short notice Storage location: Röllbach

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn Bcedpfx Asx D E Avsbpeu This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating

Condition: ready for operation (used), Year of construction: 1996, pressing force: 70 t, Main Drive Pressing force 686 Kn This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information. Application Types Pressing / Laminating Bcedpfx Ajx D D Nnjbpou

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressure: 2.8 – 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety release line Safety frame Push-button control Connected load: 19.3 kW External dimensions: 2960 x 1490 x 1890 mm Storage location: Supplier Bcedpfx Aboxy Tl Ropsu

Condition: used, Used machine Features and technical data: Bcjdpfsxwz Iujx Abpou - Pressing area: 2500 x 1300 mm - With ELKOM gold-anodised energy-saving plates - Total pressing force: 80 t - Specific pressure: 2.5-3.0 kg/cm² - 6 pressing cylinders, each with 68 mm diameter - Opening width: 300 mm Dimensions: 3080x1550x1800 mm Weight: approx. 4700 kg Availability: Approx. mid-April 2026 Location: Hesse

Condition: used, Used machine Technical specifications: - Plate size: 2200 x 1100 mm - Max. opening: 315 mm - Heating medium: Electric Bcjdpfx Ajxuxhaobpou - Pressing pressure: 2.7 kg/cm² - Cylinders: 4 Dimensions: 2540 x 1220 x 1850 mm Weight: approx. 2500 kg Availability: approx. end of January 2026 Location: Hesse

Condition: used, Year of construction: 2024, Version: Joos A.B.S. safety system to protect the heating plates in case of incorrect loading or parts left behind. The press is open on all sides, features a robust all-steel construction, and is protected against overload. The maintenance-free hydraulic system is integrated into the oil tank. Step-less pressure adjustment is performed according to a clear pressure diagram. Once the set pressure is reached, the system switches off automatically. Constant pressure is maintained throughout the entire pressing process. The rack-and-pinion guide ensures stable parallel travel of the pressing plates. The press is optimally suited for laminating flat surfaces using adhesives, provided the corresponding technical requirements are met. Technical Data: - Max. pressing force: 1200 kN - Adjustment range: 10 – 100% - Total pressing area: 3100 x 1350 mm - Specific pressure at full capacity: 3.0 daN/cm² (kg/cm²) - 6 cylinders, 80 mm diameter, 400 mm stroke - Hydraulic working pressure: 398 bar - Press room height: 400 mm - Color: Light grey, RAL 7035 Hydraulics: The following components are integrated into the press's hydraulic system: - 1 oil-hydraulic two-stage high-pressure pump - 1 three-phase motor, 2.2 kW Bsdexplbcopfx Abpocu - 1 automatic pressure switch - 1 change-over valve - 1 pressure diagram The hydraulic unit is built into the lower section of the press. Controls: Automatic pressure control via electronic controller with setpoint and actual value display. Operation is performed via a clear control panel. The control cabinet is fully integrated lengthwise in the upper section of the press. Operating voltage: 400 V, 50 Hz, 3-phase. ELECTRIC HEATING PLATE 3100 x 1350, GOLD ANODIZED One lower and one upper electric heating plate, 3100 x 1350 mm. The surfaces are anodized, making them extremely hard, scratch- and abrasion-resistant. High-temperature insulation between the heating plate and the press table. Maximum operating temperature: 120°C. (1 section / 2 heating plates.) TEMPERATURE CONTROL Temperature control R 1.1; each heating plate features an electronic temperature controller and a safety temperature limiter around the edge of the heating plate. SWIVEL PANEL OPERATION Operation is via an ergonomic swivel panel control. Location: Rieth

Condition: like new (used), Shelf length: 3000 mm Bjdpfsxlgzpsx Abpscu Shelf width: 1300 mm Number of pistons: 6 Water heating Weight: 4300 kg

Condition: used, Year of construction: 1984, total width: 1,500 mm, total length: 3,000 mm, total height: 2,000 mm, Empty weight: 2.500 kg - Year: 1984 - Documentation available: No - CE certificate present: No Bcedpfexhcg Tsx Abpou - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 300 - Number of work zones [pcs]: 1 - Number of cylinders [pcs]: 4 - Cylinder diameter [mm]: 70 - Transport dimensions: 3000mm x 1500mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg Bedpexfg A Hofx Abpecu

Condition: like new (used), Year of construction: 2004, working width 2700 mm working height 100 mm hydraulic cutting gauge adjustment to size cast body power supply 400V Bcedpfxoxcn Dtj Abpou 3000 kg Year of manufacture 2004

Condition: used, Used machine Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons Bcodjwpm I Hepfx Abpju - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 1992, operating hours: 5,000 h, functionality: fully functional, total width: 1,400 mm, total length: 3,200 mm, total height: 2,900 mm, overall weight: 23,000 kg, temperature: 210 °C, pressing force: 200 t, operating temperature: 200 °C, workpiece height (max.): 150 mm, table width: 1,400 mm, table length: 3,200 mm, You can view the machine under power until mid-July 2025. For sale is an almost as-new veneer press with infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of construction 1992). The machine is in excellent condition and has only low usage hours. Machine type: Throughfeed press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of construction: 1992 Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Loading: yes Bjdpfownpcdox Abpocu Infeed belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Passage height: approx. 100 mm Feed temperature: 200° Thermal output: 45 kW Heating medium: oil Press force: 200 tons The press machine is in top condition, has had very low usage, and has been used exclusively for development projects for the past 15 years. I will gladly send you further information and pictures on request. The machine is immediately available and can be viewed by arrangement at any time. Pick-up only! Function video on request. If interested, I am happy to provide further information or arrange a viewing!