Bernhard Ide GmbH & Co. KG

Year of construction: 1996, Condition: ready for operation (used), machine/vehicle number: 455, HAUL-OFF UNIT ME 30/4 - used machine, checke and ready for operation - 2 DC drives 1,1 kW each Dqj7W2 - haul-off speed up to 50,0 m/min - contact length approx. 800 mm - pneumtic clamping * weight compansation for upper haul-off carrier * compansation tank for pressurized air - 2 haul-off belts 75 mm wide - protection cover mit Folding door, endschaltergesichert, * without inlet protection tunnel - control panel with 12 m connection cable - incl. short interruption device

Year of construction: 1992, Condition: ready for operation (used), machine/vehicle number: 154, CALIBRATION UNIT ME16/6.2 - used machine (IDE-Technikum), checked and ready for operation - base frame 3,0m long - mounting platform 2500mm - manuelle length adjustment, with handwheel Cfu39O908W - manuelle height adjustment, with ratchet - manuell cross adjustment, with hand wheel - 2 vacuum pumps - 2 manifold with each: * 10 water connections 1/2" * 10 vacuum connections 1/2"

Year of construction: 2013, Condition: ready for operation (used), machine/vehicle number: 248, CALIBRATION UNIT ME16/6.2 - used machine (IDE-Technikum), checked and ready for operation - mounting platform 3950mm x 700mm - motorized length adjustment 500mm - motorized height adjustment 875 - 1025mm Dqj7Wr - manuell cross adjustment, 50mm - 2 vacuum pumps - 2 manifold with each: * 20 water connections 1/2" * 20 vacuum connections 1/2"

Year of construction: 2025, Condition: new, machine/vehicle number: 30630, IDE-o/c 12002673 SINGLE SCREW CO-EXTRUDER MEB 20/5x25D - NEW machine from IDE-stock program - mobile on 4 swivel castors - manual height adjustment +300/-100 mm via threaded spindle - control cabinet integrated in the frame - control via PLC Control 20/4 * operation via 5.7" touch panel * screw on/off * screw speed * screw speed display * display motor load * heating on/off/lowering value - emergency stop button on the control cabinet - incl. connection cable 5 m long with CEE plug 32 A - AC parallel shaft helical geared motor 2.6 kW air-cooled, in Z-design - screw speed max. 92 rpm - screw back pressure max. 300 bar (temporarily 350 bar) - one-piece cylinder (nitrided) with water-cooled feed zone * integrated pressure disc for overpressure protection - 2 cylinder heating zones with 2 cooling fans - die connection M22x1,5 with union nut - 1 additional heating zone with heating band for union nut Cfu3Bvkiom - 1 additional heating zone for heating hose (without heating hose) - material hopper, 6 liter capacity, fixed on cylinder - 1 additional socket SCHUKO 16A for hopper conveyor screw Ø 20 mm x 25 D - Screw for processing PVC-F - output range 0.5 to 5.0 kg/h, depending on tool back pressure - nitrided and polished, with integrated screw tip

Year of construction: 2025, Condition: new, machine/vehicle number: 30632, IDE-o/c 12002675 SINGLE SCREW CO-EXTRUDER MEB 30/5x25D (picture similar, here shown MEB H20/5x25D) - NEW machine from IDE-stock program - international size 1-30-25 - mobile on 4 swivel castors - manual height adjustment +300/-100 mm via threaded spindle - control cabinet integrated in the frame Dqj7Wh * incl. connection cable 5m long, 32 A CEE - control via PLC Control 20/4 with 7" touch panel * drive on/off * display screw speed * display motor load * heating on/off/lowering value * set value either via touch display or digital potentiometer - emergency stop button on the control cabinet - AC parallel shaft helical geared motor 5.2 kW air-cooled, in Z-design - screw speed max. 88 rpm - screw back pressure max. 300 bar (temporarily 350 bar) - one-piece cylinder (nitrided) with water-cooled feed zone - 3 cylinder heating zones with 3 cooling fans - material hopper, 6 liter volume, fix mounted on barrel - die connection M22x1,5 screw Ø 30 mm x 25 D - Screw for processing PVC-F - screw design acc. to drawing 1258060 - output range 1.5 to 8.0 kg/h, depending on tool back pressure - nitrided and polished, with integrated screw tip - screw take-out to the front (in extrusion direction) 4 additional heating zones - display in extruder control - sockets CEE 230V, temperature probe FeCuNi Typ L - 1 additional heating zone with heater band for union nut - 1 additional heating zone for heating hose (without heating hose) - 2 die heating zones, without heating element (as spare) melt pressure and temperature measurement - combination probe ½"-20UNF-2B, cable pluggable - pre-warning 250 bar / shutdown 300 bar - visualization in ME Control 20/4 extruder control

Year of construction: 2002, operating hours: 73,587 h, Condition: ready for operation (used), machine/vehicle number: 300, CO-EXTRUDER MEB 38/2 x 25 D - used machine, function tested, ready to use -Chassis with swivelling device and height adjustment - DC drive 5,2 kW - Screw speed approx. 60 min-1 - 1-part cylinder, made of nitrided steel incl. water-cooled inlet zone - 4 cylinder heating/cooling zones with 4 air blowers - 1 connection flange heating zone with controller, switching element and heating element - 1 mould heating zones without heating element - Feed hopper made of V2A * Capacity approx. 12 litres * Sliding mechanism Mould connection Cfu2D2Uv8C - flange system IDE, incl. thread M 30 x1,5 Control cabinet / electrics - permanently attached to the base frame * incl. circuit for bridging short-term power failures Compact control mini ME Control /3 * Mounted in portable housing with 3 m connection cable to the control cabinet - Screw on/off - Screw speed via digital potentiometer - Screw speed display - Motor load display - Heating on/off/lowering value 1x screw Ø 38mm x 25 D - 3 zone screw for processing PVC - Nitrided and polished - Screw tip suitable for mould connection

Year of construction: 2001, operating hours: 55,378 h, Condition: ready for operation (used), machine/vehicle number: 15, SINGLE SCREW EXTRUDER ME90/4 x 25 D - used machine, checked and ready for operation - open frame construction with spur gearing and directly flange motor - DC-drive 50 kW - screw speed max. 38 rpm - 1-part cylinder, smooth with water-cooled entryzone - 6 heating and cooling zones - 1 flangeheating zone - 5 die heating zones, without heater - die connection incl. heater band - electrical cabinet mounted on operation side * incl. short interruption device 0,5 sec. - additional Sockets Dqj7Vt * 1 CEE-socket 5-pole 400V, 32A * 2 Schuko-socket 230V, 16A - temperature controller type KS40, with self-optimisation - operation panel swivelling - melt pressure and -temperature measuring incl. 2 probes 1/2" - 20 UNF - hopper 100L with 3-pos. svievel mechanism - incl. screw for processing PVC-U granule * nitrided , polished and hollow bored - incl. screw tip tempering system * incl. oil tempering unt

Condition: excellent (used), Year of construction: 2019, operating hours: 283 h, Functionality: fully functional, Equipment: type plate available, OPM complete system incl. ODAC TRIO measuring head consisting of: * 1 measuring head: ZUMBACH * 1 OPM system: make IPC, DE * 1 frame / holder: make IDE - 3-axis laser measuring head ODAC 33 TRIO-EN-RS * Measuring range 34mm * Measuring field 34 x 34 x 34 mm * Smallest product diameter 0.15 mm * Scanning frequency: 3x 600/sec Bgdlipaxuw incl. profile guide incl. calibration sample set for ODAC 33 TRIO - OPM system for article management, recording and evaluation of measurement results * Standard built-in panel PC 19" multi-touch with 1280x1024 Intel i5, 8GB RAM > in portable housing with 15m cable connection to the control cabinet on the rack (at the measuring head) * Software equipment > OPM - Online Product Monitoring Standard Version 8 > Datamanager - Measuring head mounted on IDE intermediate frame and attached to adjustable holder * For electrics for complete system in the rear control cabinet centrally located

Condition: used, Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 756, PUNCHING UNIT ME 40/6.3 - Used machine, function-tested - Working principle pneumohydraulic - Travelling distance: 200 mm, pneumatically supported - Punching force 24 KN at 6 bar - Punching/power stroke: 50/12 mm (power pack S4.50.12D) - Punching sequence max. strokes/min.: 40 (depending on profile and speed) - End position monitoring by limit switch Gxcciwi - Installation dimensions for punching tool: (w x h x l) 180 x 138 x 225 mm - Protective panelling with hinged door, limit switch protected - Without inlet/outlet protection channel - For mounting a column guide frame 350x 250x 250 mm * without column guide frame - without punching tool - incl. sequence control for external punching release (24V signal, potential-free required)

Year of construction: 1996, Condition: used, Functionality: fully functional, machine/vehicle number: 465, HAUL-OFF UNIT ME 30/4 - used machine, function-tested - Driven by 2 GS motors 0.8 kW each - Pull-off speed 0.5 to 10 m/min - Pull-off force max. 4,500 N - Caterpillar clamping pneumatic, weight compensation of the upper crawler carrier, Equalising tank for the compressed air supply - 2 transport chains 75 mm wide, 23 mm high, hardness approx. 70 Shore A profiled for roller shutter standard profile (smooth segments possible) - Protective panelling, limit switch protected - Control panel with approx. 12 m connection cable Hu2X2Do - Fixed extrusion height 1100 mm Central chain lubrication

Condition: used, Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 90, PUNCHING UNIT ME 41/2 - Used machine, function-tested E2Oxdsq - Frame l x w 1000 x 600 mm - Height adjustment with spindle - Travelling distance approx. 25 mm, pneumatically supported - pneumatically operated - Punching force 1,800 N / at 6 bar - Punching stroke length 10 mm - Punching sequence max. 150 strokes/min - Trigger pulse electrical - Without punching tool - Protective panelling with hinged door Limit-switch protected, without infeed/outfeed protection channel - Removable waste container Length measurement - with contact roller and holder for punching step 64 mm - with contact roller /0 20.38 mm with one switching cam

Condition: used, Functionality: fully functional, machine/vehicle number: 460, Year of construction: 1997, EXTRUDER ME 45/3x25D - used machine, function tested - DC drive 14 kW - Screw speed 8-85 min-1 - Cylinder, one-piece, with water-cooled feed zone - 4 cylinder heating/cooling zones with 4 air blowers - 1 flange heating zone, incl. heater band - 3 mould heating zones, without heating elements - Three-point temperature controller type KS 40 with digital display, self-optimisation and error message - die connection in special design with external thread M 85 x 2, designed for melt pressure and temperature temperature measurement Mass pressure and temperature measurement C92L8R3 - complete with 2 separate measuring probes - digital display units - incl. 2 blanking plugs Hopper - capacity approx. 60 litres - swivelling mechanism 1 Screw ø 45 mm x 25 D - 3-zone screw for processing Polyamide as per drawing 22501850 - Output capacity approx. 8-35 kg/h (depending on mould design) - Nitrided, polished and hollow drilled - Screw tip suitable for mould connection