BTS Company

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: G552-2158 U21156, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 80 m/min, torque: 206 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, workpiece diameter (max.): 900 mm, workpiece weight (max.): 700 kg, table load: 800 kg, rotary table diameter: 770 mm, overall weight: 25,700 kg, spindle speed (max.): 16,000 rpm, operating hours of spindle: 5,200 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 126, tool length: 750 mm, Equipment: chip conveyor, Machine Specifications: Model: GROB G550 AB Generation 2 Power Supply: 400V, 50Hz, TN-S Compressed-Air System: Working pressure 5 bar, minimum input pressure 5 bar Automatic Work Area Door for manual and automated loading/unloading Work Area Exhaust System: Decentralized, 800 m³, Filter Grade F9 Machine Protection for Water-Based Cutting Fluids Work Area Lighting Cooling System: Air-cooled chiller unit (11 kW) Control System: Heidenhain TNC 640 with English HMI Swivel Axis Calibration (GSC) Collision Monitoring (DCM) Kinematic Measurement Inspection Equipment Pallet Storage System Interface (Software & Hardware v1.7) Key Features: Tilting Table Unit (A-Axis) & Rotary Table with T-Slots (B-Axis) Motorized Spindle: HSK-A 63, 16,000 RPM, 159/206 Nm, 25/32 kW, Oil-Air Lubrication B09Ctg9Wkm Double Disk-Type Tool Magazine: HSK-A 63, 126 pockets, supports extra-long tools Laser Measurement System Tool Lift & Tool Cleaning Device Chip Management: Scraper-Type Chip Conveyor, Cutting Fluid Filter System KF220, Cutting Fluid Tank High-Pressure Cutting Fluid Unit (5-40 bar, ICS), Circulating Chiller (13 kW), Air Gun & Flush Gun in Work Area, Compressed Air Feed Through Spindle Center Touch Probe: Renishaw OMP60 Remote Machine Diagnostics with Access Control Switch CE Labeling, Slovenian Documentation & Tags Easy Robot 250 Automation System: Base Unit: ERE Robot Easy MTS 2.0 400, 6-position 250kg Accessories: EWIS Rapid Scan, Comserver Kit Internal Erowa Manual Control Options: Magazine modification, Robodoor & Safety Fences Interfaces: Plug Kit Harting Modular Connector Installation & Training Included Tooling for Automation: MTS Base Plate 410x410x250 P/A Universal (6x) MTS Pallets, Seals, and Chucking Spigot Set MTS Gripperlink Rapid & EWIS Rapid Chip with Chip Holder This GROB G550 is an advanced, fully-equipped machining center ready for high-precision and high-efficiency operations. The Easy Robot 250 system enhances automation capabilities, making it an ideal solution for modern manufacturing environments.

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: MV0091-005872, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 141 Nm, controller manufacturer: SIEMENS, controller model: SIEMENS, workpiece height (max.): 590 mm, workpiece weight (max.): 1,000 kg, Equipment: chip conveyor, documentation/manual, DNM 5700 S828D III. generation: Bsgy0Rvaeua - 15" MONITOR - TOUCH SCREEN - "SHOP MILL" PROGRAMM PACKAGE - MAX. SPINDLE SPEED 12.000 [RPM] - WITH SPINDLE HEAD COOLING SYSTEM P=11/16.5[kW](S6 40%), Tmax=141[Nm](S6 40%) - SPINDLE SPECIFICATION - BT40 / PULL STUD : KI217-22327 - ATC 30 tools - TSC - 12[bar]-50[Hz],4.0[kW] - OIL SKIMMER - PREPARATION FOR 4TH OS(SIEMENS) - AIR CONDITIONER - DNS TOOL LOAD MONITORING SYSTEM - MPG - HANDLE - COOLANT GUN - FLUSHING THE WORKSPACE - FLOOD COOLANT - AIR BLOWING NOZZLE ON SPINDLE HEAD - RENISHAW OMP60 IN-MACHINE MEASURING SYSTEM AND OTS CABLE FREE TOOL MEASURING SYSTEM (SPINDLE) OPTICAL TYPE SENSOR - MEASURING CYCLES SOFTWARE FOR S840D - TS27R, OMP60, OTS - ON NETWORK DRIVE - Additional measuring version beyond (only milling) - SW-OPTION DXF READER CHIP CONVEYOR DNM5700, SARIGOL - HINGED BELT G. Robert Nikola mob: +385 91 727 3171

Condition: excellent (used), Year of construction: 2013, operating hours: 49,265 h, Functionality: fully functional, machine/vehicle number: 4512, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 167 Nm, controller manufacturer: Fanuc, workpiece height (max.): 900 mm, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, 2013 Toyoda Jekt FH400J horizontal machining center. Highly reliable and precise, this machine offers excellent performance for a range of manufacturing needs. With advanced features like high-speed spindle, durable construction, and user-friendly controls, it’s ideal for efficient production. Regularly maintained, in good working condition. Iswgvhq Specifications: Year of Manufacture: 2013 WITH FANUC 32iMA CONTROL UNIT Pallet Size: 400mm x 400mm Spindle Speed: 15,000 RPM Spindle Taper: BT40 X-Axis Travel: 600 mm Y-Axis Travel: 560 mm Z-Axis Travel: 630 mm Tool Magazine Capacity: 60 tools IN-MAGAZINE TOOL BREAKAGE DETECTION ROTARY TABLE INDEXING ANGLE 0.001° COOLANT GUN Workpiece weight 400 kg 3 COLOUR PATROL LIGHT (LED) WORKPIECE SEATING DETECTION RENISHAW OMP60 WORKPIECE MEASUREMENT SYSTEM CHANGE OF EMULSION PRESSURE: 40[bar] > 70[bar] KNOLL COMPACT FILTER UNIT WITH PAPER FILTER (AP1850 Knoll KF200/1400-> Tank 1400 l, 30 l/40 bar, 150 l/3 bar) Width of machine: 2100 mm Depth of machine: 4205 mm Height of machine: 2735 mm Weight of machine:11000 kg

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: MV0064-000131, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, torque: 159 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, workpiece weight (max.): 1,500 kg, total height: 3,170 mm, total length: 3,480 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. Dpsem9 -10.4 " display -Big plus BT40 tool shank -30 tool storage capacity -through spindle coolant 20 bar -additional axis _ wire and piping hydraulics preparation -Tool load monitoring -Portable MPG

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: ML0406-000788, turning diameter over cross slide: 600 mm, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 67 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,921 mm, total length: 2,880 mm, total width: 1,711 mm, turning diameter over bed slide: 600 mm, workpiece weight (max.): 150 kg, turning diameter over top slide: 210 mm, torque: 169 Nm, overall weight: 4,200 kg, spindle nose: A2-6, bar diameter: 67 mm, LYNX 2100LSYB is a high-quality CNC Turning Center intended for both rough and fine turning with roller type guide on all axes. Very fast and accurate medium-sized turning center. Turret head with 12 turning positions. Machine specification: Control FANUC 0T PLUS 15 inch monitor, Memory 2MB 15" INCH MONITOR - TOUCH PANEL 3 YAW CHUCHK MAIN SPINDLE 210[mm] 8" Main spindle 4.500 [ min-1 ] P=15 / 15 / 11[ kW ] < S3 25%/15min / cont > M (max) = 169[Nm] 3 YAW CHUCK SUB SPINDLE 135[mm]5" SUB SPINDLE: 6.000 [min-1] P=5.5 /5.5 /3.7[kW] < S3 25% / S3 60 % / S1/cont > M ( max ) = 47[Nm] TURRET - 12 PO/24 INDEX BMT45 Automatic tool measuring hand RENISHAW High pressure pump 5.0[bar]- 50[Hz]/1.8[kW] Panel filtering system, filtration 20[μm], flow rate: 30[l/min] Normal pressure pump 2 2.0 Bar High pressure pump 3 12.0 bar with special valving system for continous operation between toolchange. Parts ejection system through subspindle Water through subspindle Oil skimmer Parts catcher with drawer Parts catcher with conveyor system Bar-feeder interface Doosan system of axis overload (measuring system) Signal tower light Robot inerface Chip conveyor system LOSMA air filtration unit with separation efect Water spray gun, with electronic control actuation. Tooling avaliable BMT45: 4x TOOLS STANDARD ID 6X TOOLS STANDARD OD 2X DOUBLE STANDARD ID 2X DOUBLE STANDARD OD 3X STRAIGHT DRIVEN TOOL 2X ANGLE DRIVEN TOOL Option: Barfeeder Breuning Irco 1200mm, 2011 Dpsdjb Dead length collet Chuck Collets

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: ML0492-000098, turning diameter over cross slide: 650 mm, turning length: 658 mm, turning diameter: 460 mm, spindle bore: 81 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,780 mm, total length: 3,355 mm, total width: 1,729 mm, quill travel distance: 100 mm, quill diameter: 100 mm, workpiece weight (max.): 520 kg, turning diameter over top slide: 460 mm, torque: 735 Nm, overall weight: 4,300 kg, bar passage: 81 mm, spindle nose: A2-8, CNC Turning Center intended for both rough and fine turning with box slide. Very fast and accurate medium-sized turning center. Turret head with 10 stations. The machine equipment: - 10 Inch hydraulics chucks - Turret 10 stations - Programmable tailstock - Automatic tool measure - High pressure coolant 5.0 bar - Coolant pump 14 bar with non-return valve for non-stop working - Oil skimmer - Bar feeder interface - Part catcher with box - Tool load monitoring - Signal tower (3 color : red, yellow, green) - Chip conveyor Czpw9Wobm8 - Bar feeder IRCO Breuning ILS-RBU (max. load 3 bars)

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: LVD1036, turning diameter: 740 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 380 mm, travel distance Z-axis: 760 mm, This advanced CNC lathe machine is designed for precision and efficiency in industrial machining. It features a maximum swing diameter of 800 mm, with turning capabilities up to 740 mm in diameter and 760 mm in length. NC system: FANUC 18I TB Main Technical Data Maximum Swing Diameter: 800 mm Maximum Turning Diameter: 740 mm Maximum Turning Length: 760 mm Axis Movements X-Axis Travel: 380 mm Z-Axis Travel: 760 mm Motor Power X-Axis Motor: AC servo, 3 kW Z-Axis Motor: AC servo, 7 kW Rapid Traverse Rates X-Axis: 20 m/min Z-Axis: 20 m/min Main Spindle Dpiu9J Spindle Type: ASA A2-11 Front Bearing Diameter: 160 mm Max Spindle Speed: 2000 RPM Spindle Motor Power: AC 30 kW / 37 kW (presumably peak power) Maximum Torque: 2434 Nm Turret Tool Stations: 12x2 (double turret, each with 12 stations) Tool Size: 25x25 mm, Ø 40/60 mm Boring Tool Size: Ø 50 mm Tool Change Time: 0.43 s Tool Holders External Turning Holders: 4x(HO10-25RL) Face Turning Holders: 2x(HF10-25RL) Internal Turning Holders: 4x(HB10-40N) + 2x (HB10-50N) Reduction Sleeves: 2 sets (BS 40 -10, -12, -16, -20, -25) weight of machine : 19.000kg LxWxH : 3700 x 29500 x 3370mm

Condition: new, Year of construction: 2019, machine/vehicle number: 190500021100226, The MiR500 EU pallet lift is an AMR that can carry up to 500 kg. It is still in its original packaging and is unused. Hardware includes: -Robot MiR500 EU pallet lift SW: Included in the robot, online. Inovgq0Tj Load capacity: 500 kg Maximum speed: 2,0 m/s Battery life (without load): 9 - 13 hours Charging time 10-90%: 1 hour If you have any questions or think the picture is missing something, please contact us. Please send me an email or message before calling from abroad.

Condition: good (used), Year of construction: 2020, machine/vehicle number: 204403432, The MiR250 Shelf carrier is an AMR that can carry up to 250 kg, or up to 300 kg on a trolley. It was used in the showroom. Very little used. Hardware includes: -Robot MiR250 Shelf Carrier SW: Included in robot, online. RRoB robot, RRoB robot, RRoB robot, RRoB robot, RRoB robot, RRoB robot. Load capacity: 250 kg Maximum speed: 1,2 m/s Battery life (without load): 9 - 13 hours Charging time 10-90%: 1 hour Dmhqsr If you have any questions or think the picture is missing something, please contact us. Please send me an email or message before calling from abroad.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 190200013000928, The MiR200 HOOK is an AMR that can carry up to 200kg or tow up to 300kg. It was used in the showroom. Very little used. Hardware includes: -Robot MiR200 with HOOK body (towing hook) Bglemyqikbh SW: Included in robot, online. Load capacity: 200 kg Towing capacity: up to 300kg Maximum speed: 1,1 m/s Battery life (without load): 9 - 13 hours Charging time 10-90%: 1 hour If you have any questions or think the picture is missing something, please contact us. Please send me an email or message before calling from abroad.