Used Doosan for sale (309)

Condition: excellent (used), Year of construction: 2018, Doosan PUMA VTR 1620M CNC Vertical Turning Centre With Doosan FANUC i-Series Control Maximum Swing Ø2,100mm. Maximum Turning Ø2,000mm. Recommended Turning Ø1,600mm. Maximum Turning Length 1,800mm. Maximum Table Load 10,000kg. Axis Travel 'X'=-800 To 1,000mm, 'Z'=1,200mm, 'W'=840mm (3 x 240mm Steps), 'C'=0.001° (Minimum Indexing Angle). Rapid Traverse 'X'=12m/min, 'Z'=10m/min. Ram Dimension 260 × 260mm. Spindle Speed 300 rpm. Spindle Motor Power 45/37kW. Spindle Torque 20,557Nm. Maximum Milling Tool Speed 3,000rpm. Ram Milling Tool Power 15kW (20 hp). Tool Turret Capacity 15 Tools. Maximum Turning Tool Length 500mm, Maximum Milling Tool Length 350mm, Turning Tool Shank 32 x 32mm, Boring Bar Sleeve Ø100mm. S/No. MT0055-000025 (2018/10) Godpfexvzzlex Afcsbw With Dual Chip Conveyors, Profluid High Pressure 0-70bar Coolant Filtration System, Losma Icarus Mist Extraction Unit, Kwangrim Oil Cooler, Hand Wheel, Signal Tower, Maintenance Access Ladder With Platform, Staging & Manuals. Machine Dimensions L6,500 × W4,240 × H6,303mm. Machine Weight 40,000kg. Note: No Tooling Included. Please note: Machine must be removed by Jan 2026.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Spindle speed 8000 rpm, Spindle taper BT50, Godpfx Ajxv Udgjfcebw Spindle Motor 20kW, FANUC I series Control, 24 Station ATC, through spindle coolant, swarf conveyor, Low Volt light.

Condition: used, Year of construction: 2007, Doosan ACE-HM630 Horizontal Twin Pallet Machining Centre. Serial No. HM630262 (08-2007) with Fanuc Series 18i-MB Control, Pallet Size, 630mm x 630mm, Travel X/Y/Z = 1000/800/850mm, Full B Axis, 40 Position ATC, Spindle Taper ISO50, High Pressure Coolant, Filtermist Gbsdpfexvz Ufex Afcjw Location: These lots are located in Middlesborough, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, DOOSAN PUMA 700LY HEAVY DUTY CNC TURNING CNETRE FANUC 32i A CONTROL YEAR 2014 Y AXIS C AXIS + DRIVEN TOOLS TRAVELS ON AXIS – 400 X / 200 Y / 3100 Z STANDARD TURNING 750 MM DIA SWING OVER BED 1140 MM SWING OVER SADDLE 1000 MM BORE 110 MM 610 MM HYD CHUCK SPINDLE MAX RPM 3000 TOOL SETTER PRGRAMABLE TAILSTOCK TELBROOK MANUAL STEADY – STEADY RANGE 390 – 700 DIA 45 KW CUTTING HOURS – 3955 RUN TIME 4877 SWARF CONVEYOR Gbjdpfx Afexvqc Escjw OVERALL DIMS – 7350 MM X 2710 MM X 2590 MM WEIGHT 22 TON MORE PHOTOS TO FOLLOW VIDEO ON REQUEST

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES Gbjdpfx Aoxfa Ipefcjw MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: ready for operation (used), Year of construction: 2022, General Data Gedpfx Afsxpkqcjcsbw Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1050 mm Y-Axis Movement 570 mm Z-Axis Movement 510 mm Tools Number of index 30 Type of tool holder ISO 40 Additional Equipment Inner Cooling: 13 bar This 3-axis DOOSAN DNM 5700 vertical machining center was manufactured in 2022. It features a Fanuc i-Series control, a spacious 1300 x 570mm table, and a tool magazine with 30 slots. The spindle speed reaches up to 12,000 rpm, supported by inner cooling at 13 bar. Consider the opportunity to buy this DOOSAN DNM 5700 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2017, 2017 Doosan DNM4500 VMC with Siemens 828D Control With Shopmill Gbjdpfjxq Eiiox Afcew Table Dimension 1,000 x 450mm. Maximum Table Load 600kg. Axis Travel 'X'=800mm, 'Y'=450mm, 'Z'=510mm. Rapid Traverse 'XY'=36m/min, 'Z'=30m/min. Maximum Spindle Speed 12,000rpm (18.5kW Motor). Maximum Spindle Torque 117.8Nm. Spindle Taper BT40. 30 Position ATC. Maximum Tool Length 300mm. Maximum Tool Ø80/125mm (No Adjacent Tool). S/No. MV0090-000473 (2017/03). With Coolant System, Chip Conveyor, Handwheel & Signal Tower. Overall Machine Dimensions L2,160 x W2,465 x H2,985mm. Weight 5,000kg.

Condition: good (used), Year of construction: 2007, 770mm Swing, 550mm max. machining diameter, Gbjdpfx Asxv Tf Nsfcjw 1100mm Distance between Centres, 2000rpm spindle, 116mm bar capacity, 10 station turret 26kW spindle motor, FANUC 21iTB control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, tool setter.

Condition: used, Year of construction: 2013, Doosan Puma 700L CNC Heavy Duty Lathe. Serial No. ML0158-001180 (11.2013) with Fanuc Series 32i-Model A Control, Max Swing 1030mm, Max Turning Diameter 900mm, Distance Between Centres 3200mm, 12 Station Turret, Kitagawa B24 24" 3-Jaw Chuck, 1400 rpm, Toolsetter, Tailstock, Manual Steady, Swarf Conveyor, Filtermist Location: These lots are located in Middlesborough, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Godpjxvz Swofx Afcsbw

Condition: good (used), power: 202 kW (274.64 HP), fuel type: diesel, color: orange, Year of construction: 2022, operating hours: 2,901 h, Equipment: air conditioning, Technical information AdBlue system: Yes Gsdoxwdm Tspfx Afcjbw Make of engine: DL08-LEE04 Top speed: 6 km/h Empty weight: 32.200 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DHKCECENTN0010409 Other information Output of the auxiliary hydraulics: 288 l/min Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,605x3,4x3,37 Production country: KR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 8 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 50.800 kg Make of engine: DC13 076A Functional Bucket capacity: 2,72 m³ Condition General condition: very good Gbedpfoxuz Ivex Afcow Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 12,2x3,35x3,8 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Z-Axis Movement 2033 mm Gjdsxr Rz Topfx Afcobw Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 2,000 mm, travel distance Y-axis: 960 mm, travel distance Z-axis: 800 mm, table width: 900 mm, table length: 2,400 mm, table load: 4,000 kg, Rigid construction for Heavy Duty jobs Direct drive powerful processing in 2 stage gear drive Fully covered machine Distance spindle nose - table top 200 - 1000 mm Distance spindle nose - to column 1005 mm Ex. Honeywell Aerospace Oil skimmer and Chip conveyor included  YOP 2007 deliverd in 2008 and 2009 X - Travel: 2000mm Y - Travel: 960mm Z - Travel: 800mm Table Length: 2400mm Table Width: 900mm Table load: 4000 Feed rate X-Axis: 16000mm/min. Feed rate Y-Axis: 16000mm/min. Feed rate Z-Axis: 16000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 30kW Speeds / ranges: 6000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Gsdpfx Afsxbd Ryscsbw Length: 5960mm Width: 4840mm Height: 3630mm Weight: 18000kg

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, Gedpfxjxv Svme Afcobw sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914015, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Gsdpfx Afexbwvcscebw Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch

Condition: excellent (used), Year of construction: 2014, operating hours: 28,446 h, functionality: fully functional, machine/vehicle number: MV0061-000288, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Gbedpsv Du A Ajfx Afcsw Machine comes with various BT40 Tool holders

Condition: new, power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 10 h, Equipment: air conditioning, Technical information Gsdpfjxuz Ipjx Afcobw Track width: 60 cm Empty weight: 50.800 kg Make of engine: DC13 076A Functional Bucket capacity: 2,72 m³ Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 12,2x3,35x3,8 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Godpfx Afexg Ui Decebw Main Drive Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Gsdpfsxm Sxvex Afcjbw Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: excellent (used), Year of construction: 2012, operating hours: 37,513 h, functionality: fully functional, machine/vehicle number: MV0061-000073, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Machine comes with various BT40 Tool holders Gbjdpfxjv Duy Ij Afcjw

Condition: good (used), power: 213 kW (289.60 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 6,326 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: DL08P Empty weight: 36.200 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCECEBEH1020055 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Gsdpoxuz Iijfx Afcebw Transport dimensions (LxWxH): 11,3x3,5x3,4 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Gbjdpfx Afoxg Ui Recew Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2013, operating hours: 29,083 h, functionality: fully functional, machine/vehicle number: MV 0061-000242, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Gbedpfx Aov Du Avsfcow Machine comes with various BT40 Tool holders

Condition: good (used), power: 141 kW (191.71 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 8,477 h, Equipment: air conditioning, Technical information Track width: 60 cm AdBlue system: Yes Make of engine: DL06P Empty weight: 25.100 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DHKCEBBWTG0001283 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,6x3x3,6 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Gedpfx Afexuz Icjcobw

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement X-Axis Movement 762 Y-Axis Movement 516 Z-Axis Movement 570 This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Gbedpsxgv T Defx Afcsw Milling