Capacity: 460 x 460 mm
Speeds: 20 - 120 Metres per Minute
Vice opens: 520mm
Twin vices: Yes
Stroke of feed vice: 500mm
Bundle cutting: 368 x 210 mm
Blade size: 41 x 1.3 x 5300 mm
Engine power: 5.5 kW
Length: 2900 mm
Width: 2290 mm
Height: 1680 mm
Weight: 2530 kg approx.
Fully automatic sawmill, saw and roller conveyor in good working order.
Available inspection under working conditions more
cutting diameter:260 mm
saw band length:3912 mm
cutting width:260 mm
cutting range:260 x 260 mm
workpiece height:260 mm
cutting speed:15 - 125 m/min
roll diameter:500 mm
total power requirement:4 kW
weight of the machine ca.:2,1 t
dimensions of the machine ca.:1,4 x 1,8 x 1,9 m
Machine with roller infeed stand
- chip conveyor
- chip tank more
Cutting area 90 ° around 530 mm
Cutting area 90 ° flat (wxh) 630 x 530 mm
Cutting area 90 ° square 530 x 530 mm
Cutting area 90 ° bundle (wxh) 630 x 530 mm
Workpiece weight max. 8000 kg / 1000 mm
cutting diameter 0400 mm
saw band length 4570 mm
cutting width 1,6 mm
type of control Zyklus
mitre joint cuts -/+ degrees nein
material thickness 400 mm
material width 450 mm
width of saw-band 32 mm
thickness of material 1,066 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Automatic band saw with infeed. more
cutting diameter 230 mm
saw band length 2730 x 27 mm
cutting width 0,9 mm
capacity 90 degrees: flat 320 x 130 mm
capacity 45 degrees: round 180 mm
capacity 45 degrees: flat 230 x 100 mm
cutting speed 35 - 70 m/min
cutting angle + - 45 °
hydraulic motor 0,37 kW
coolant pump 0,12 kW
sawing motor 1,5 kW
total power requirement 2 kW
weight of the machine ca. 440 kg
dimensions of the machine ca. 1,4 x 0,9 x 1,3 m
Setting of the saw pressure by hydr. cylinder
Cooling device, material stop... more
saw blade diameter 520 mm
cutting diameter 180 mm
stroke 420 mm
cutting length 420 mm
capacity 90 degrees: flat 500 x 115 mm
cutting range rectangle 400x165300x125240x106 mm
Capacy 45°: rectangle 430x110 350x165 290x175 m/min.
saw band feed 10 - 80 m/min
total power requirement 2,8 kW
weight of the machine ca. 1,25 t
dimensions of the machine ca. 1,52 x 1,52 x 1,56 m
Condition: good, machine ready for operation
Electric 380 Volt
Control panel Siemens
Minimum quantity cooling device
cutting diameter 250 mm
saw band length 3660 mm
cutting width 260 mm
cutting lenght max. 400 mm
hydraulic 0,75 kW
cutting speed 20-70 m/min
dimensions of saw-band 3660 x 25 x 0,9 mm
saw drive 0,5 kW
weight of the machine ca. 720 kg
dimensions of the machine ca. 1,9 x 1,45 x 1,15 m
Condition: ready for operation
Electric 380 Volt
Cooling equipment 15 l
Fully automatic hydraulic band saw with tong feed, multiple stroke (double),
counter for section length adjustment and pre-selection coun... more
Cold circular saw, metal circular saw, metal chop saw, underfloor saw
-Saw blade diameter 450 mm
-Gearbox with 4 speeds 6/12/24/48 rpm
-Clamping pressure reduction for clamping device
-Schnittdruckabhängige saw blade shutdown
-Drive 3 / 3.6 kW
-with coolant device
-Cutting area at 90 degrees Round: 90 mm
-Cutting area at 90 degrees square: 140 mm
-Cutting area at 90 degrees flat: 240 x 70 mm
-Cutting area at 45 degrees round: 145 mm
-Cutting area at 45 degrees square: 125 mm
-Cutting a... more
cutting width 160 mm
Cutting height 280/200 mm
Motor output 9 kW
weight of the machine ca. 2,2 kg
Cutting length 0- 3000 mm
saw blade diameter 500 mm
cutting diameter 180 mm
stroke 180 mm
control C 2001
total power requirement 10 kW
dimensions of the machine ca. 4,6 x 1,5 x 2 m more
Semi Automatic Circularsaw Imet Serio 350 SHE
Saw blade diameter: 350 mm
Saw capacity: 130 mm round / 100 mm square
Saw mitre: 45º left/right
Saw speed: 9 / 18 / 36 / 74 Rpm
Clamp opening: 180 mm max.
- Pneumatic clamp
- Pneumatic sawfeed
Country of origin: Italy
Machine weight: 450 kg
Machine LxWxH: 1.000 x 810 x 2.000 mm
Very suitable for steel, stainless steel, copper and brass more
Pipe reciprocating saw, pipe jig saw, carrier jig saw, reciprocating saw, foxtail nominal consumption 750 W stroke length 60 mm weight 6.2 kg maximum material thickness pipes up to max Ø 300 mm - div saw blades
-in the case
Weight 30 kg more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.