Scigen inc.

Year of construction: 2018, operating hours: 3,550 h, condition: good (used), fuel type: diesel,

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Fodpfxjyt Ihbe Aa Eepd Further information can be found in the attached PDF.

Condition: ready for operation (used), Fanuc manipulatierobot die een last van 700 kg kan hanteren Heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter. Fpsdpfxeytyqhe Aa Eed met R-30iB Plus controller control: R-30iB A05B - 2614 - B090

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 4512 31727.01, Machine for spot-welding wire onto tube. Fpedoytykhepfx Aa Eod

Condition: good (used), Year of construction: 2013, Ionizing Air Blower Haug Ion-Air Blower Manufacturer: Haug GmbH & Co. KG Model: Ion-Air Blower Type: Ion-Air blower Id. 04.0361.000 Serial number: 13889018 Year of manufacture: 2013 Protection class: IP40 Fsdpfxeytqkrj Aa Ejpd Primary voltage: 230 V Frequency: 50–60 Hz Power consumption: 70 VA CE marking: available Function: Neutralization of electrostatic charge using ionized airflow Field of application: Plastics processing, injection molding machinery, packaging and automation lines

Condition: new, functionality: fully functional, machine/vehicle number: L SK II - 370 - 7,5, Year of construction: 2021, operating hours: 1 h, load capacity: 150 kg, total length: 7,500 mm, We are offering this new FramaTec column-mounted crane, year of manufacture 2021. The crane has only one operating hour to date. The suction unit is included in the price. Fodpfxeytqiue Aa Espd If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multistage pump Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Equipment supplied: - Industrial mounting base - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations 2 identical units available. Fsdpfx Asytgvwoa Eopd

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, overall weight: 122 kg, LASER IN LIKE-NEW CONDITION, USED ONLY FOR TESTING AND DEMONSTRATION PURPOSES Laser cutting and engraving machine for the signage and promotional marketing industries - made in USA ▪ CO2 laser tube in a sealed metal housing, 25 KW power, air-cooled, 10,640 nm wavelength, approximately 30,000 working hours lifetime. ▪ The laser source can be quickly replaced using the 'Quick-Change' system, without technician intervention or the need to realign the laser beam. Universal manufactures only RF-Excited sealed CO2 laser sources, which provide constant power output and require no maintenance. ▪ Maximum material dimensions: 737 x 584 x 229 mm, but larger materials can also be processed as the front side is open. ▪ Working area: 610 x 457 mm ▪ Honeycomb cutting bed - minimizes contact between the material and the reflective engraving table and more efficiently removes particles and fumes generated during cutting ▪ Maximum supported material weight: 18 kg ▪ Machine dimensions: 914 x 965 x 914 mm ▪ Electrical connection: 220 – 240V / 5A The package includes the following optional features: ▪ BOFA filter, 400 m3/h air flow – allows use even in enclosed commercial spaces ▪ Focusing lens with a 2.0” (5.08 cm) focal length and 0.125 mm focal spot diameter ▪ HPDFO focusing lens + beam collimator. Focal length: 2.0” (5.08 cm), Focal spot diameter: 0.025 mm – Suitable for marking metals ▪ Rotary attachment included – maximum object diameter for rotation: 203 mm Fjdpfxeytdtyo Aa Eopd ▪ “Air-Assist” cooling and cleaning system – Delivers a clean air jet over the material surface to suppress flames and improve engraving/cutting quality. Also helps to clean the equipment’s optical components (mirrors + lens) ▪ Metal cone for directing airflow at 90 degrees onto the material ▪ Back-Sweep – hose for directing airflow at 45 degrees onto the material ▪ 2 bar pressure compressor – PICCOLINO brand, supplies clean air for the “Air-Assist” system ▪ ‘Laser Interface+’ operating software: user interface allowing for automatic or manual control over power, movement speed, laser pulses (PPI), and other system settings. Includes a materials database with predefined settings according to the processed material; simply select the material type from the list and the driver loads the optimal parameters for cutting/engraving. Settings for custom materials not in the standard database can be saved, stored, and loaded. To maximize processing efficiency, the interface can estimate the remaining time for engraving or cutting. ▪ Additional 1Touch Laser Photo software – for high-precision engraving, including for complex image engraving.

Year of construction: 1993, operating hours: 100 h, condition: used, functionality: fully functional, machine/vehicle number: 442714, Three-phase industrial generator sets with self-regulating alternator compliant with CEI 2-3 / IEC standards. Rated power 1100 kVA (880 kW) at 1500 rpm – 50 Hz operation. Units are installed on a steel base with containment system, independent control panel, and exhaust lines. Main specifications: Alternator Tessari EC 43 LA/4 Power: 1100 kVA Active power: 880 kW Rated current: up to 5000 A (depending on voltage configuration) Voltage: 127/220/254/440 V Fedoytc Dwopfx Aa Espd Cosφ: 0.8 Insulation class: H Year: 1993 The generator sets can be used for: Prime power generation Backup power supply Power supply for large industrial facilities

Condition: new, We aim to empower foam converters to manufacture better products at higher speeds and lower costs. • Automatic welding, 2 tables (right/left for pendulum operation) Fpedpfx Aoytc Atsa Eed • Adjustable needle height.

Year of construction: 2026, condition: new, Manual hot plate welding machine, designed for welding laminated PE/EPE foams. It offers high precision and high productivity, 1000x600 mm Fodpsytcwkjfx Aa Ejpd

Year of construction: 2026, condition: new, Our machine is a one-head pneumatic oscillating blade cutting table designed for efficient processing of a wide variety of materials. EVA XPE EPP PE LEATHER HONEYCOMB CARDBOARD Fpedpfx Ajytcv Tsa Ejd General Information Machine dimensions: 3310 x 1750 x 1370 mm Maximum panel size: 1300 x 2400 x 100 mm Maximum board size: 1300 x 2400 x 100 mm Total installed power: 11 kW Cutting heads: 1 Maximum cutting speed: 700 mm/sec Maximum cutting thickness: 100 mm Oscillating blade, creasing wheel

Year of construction: 2017, condition: excellent (used), machine/vehicle number: 26616, Equipment: CE marking, The Hapa 237-Hybrid is a modular UV printing system that combines the economical features of flexo technology with the full flexibility of digital Drop On Demand printing. Operating Roll to Roll, the system can print on a wide range of roll-fed substrates including aluminum foil, paper, PVC, medical paper, and Tyvek. Utilizing UV-cured inks, it is ideally suited for pharmaceutical applications. Conversion and installation of PPS is possible. - Print today, use tomorrow - Serve multiple lines with one machine - Print complete artwork including variable data - Overprint partially pre-printed foils - High speed - Compact footprint - User-friendly operation - Integrated edge and tension control - Leaflet printing with GUK connection possible Technical Data Sheet: (See Images - 3 pages) Fpsdpjyr Imbsfx Aa Eod

Year of construction: 2019, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: T2C100295, The T2-C bridges the gap between compact, affordable desktop label printers and costly, large-scale commercial label presses to deliver a highly flexible and productive solution for medium to large volume label production. Outfitted with cost-effective 2-liter ink tanks, the T2-C offers an ideal balance of enhanced print accuracy and reduced ink costs, resulting in notable operational savings throughout its lifespan. - Rapid print speed up to 12 inches per second (60 feet per minute) - Superior image clarity with up to 1600 dpi resolution - Adjustable print width from 2” to 8.6” - Compact footprint – occupies less than 4 square feet - The first desktop press offering the throughput and precision of a full-scale digital press - The T2-C stands as the first high-capacity, high-volume tabletop label press able to sustain precision during extended print runs. Delivering consistent, large volumes in 24/7 production, the T2-C redefines possibilities in the label printing sector. This high-output tabletop press is perfectly suited for brand owners, print shops, and small-scale label converters aspiring to diversify their portfolio with high-resolution color inkjet labels. Furthermore, the T2-C operates quietly and, thanks to its compact 4-square-foot design, integrates seamlessly into any printing facility. Additionally, the T2-C produces commercial-grade labels with exceptional print resolution of up to 1600 dpi. The adjustable print width (2” to 8.8”) enables printing of multiple labels or single oversized labels in a single print job. Most importantly, with an impressive print speed of up to 12 inches per second, users can handle extensive print runs efficiently. Key Features of the T2-C: - Straight-feed, short web path for precise printing and minimized material waste - Servo-driven web handling and tensioning system for optimal media control - Dynamic web guide with servo-controlled unwind/rewind shafts ensures precise registration, supporting full-bleed printing on pre-die cut labels and perfectly wound rolls - Advanced ink system and printhead combination extends printhead longevity and lowers ink consumption, reducing overall operating costs Advanced T2-C Ink System: - Yields approximately 500,000 4" x 4" (100 mm x 100 mm) labels at 50% ink coverage - 1.5 to 3 times increased lightfastness - Significant enhancement in water resistance - Improved black (K) ink performance while reducing Cyan, Magenta, and Yellow usage - Approximately 10% lower total cost of ownership versus previous ink formulations The T2-C is an optimal desktop label printing solution, providing both business owners and users with peace of mind through the perfect fusion of ease of use, precision, print quality, and reliability. Printer Specifications: - Print Technology: Memjet Waterfall Technology - Ink Type: Dye ink, 4 individual CMYK tanks or cartridge option - Print Resolution: 1600 x 800 dpi or 1600 x 1600 dpi Fpsdpjyr Hx Ajfx Aa Eod - Print Speed: 6 ips (150 mm/s) or 12 ips (300 mm/s) - Maximum Print Width: 8.6”

Year of construction: 2014, condition: ready for operation (used), machine/vehicle number: 61984, The proven folding technology of the CARTONAC 2000 series makes this machine a productive asset and a high-value technological investment. Suitable for a wide range of print formats. Easy placement of material during operation, sheet withdrawal from below. Continuous folding without machine downtime. Folding mechanism: 215 mm feed width, 4 folding pockets Output: Up to 460 sheets per minute (format length up to 320 mm) Up to 200 sheets per minute (format length over 320 mm) Drive: Fjdsyr Hqxepfx Aa Ejpd Base frame with integrated drive Independent control system (S2), optionally mobile FA21/4-S2CAT2000-2 (model) Year 2000 GUK 2000 stand-alone fan folding machine FA21/4-S2CAT2000-2

Year of construction: 2010, condition: good (used), Equipment: CE marking, Secondary crushing plant consisting of a feed hopper on skid, approx. 10 m³, a conveyor feeding a Pozzato PZ FL impact crusher, 40 t/h, an impact crusher mounted on trailer with 55 kW drive, a ground storage conveyor for aggregate, complete electrical panel and cabling. Fpedpfxsyr Arrs Aa Ejd

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: 7523/OC6199, Equipment: CE marking, Complete cement dosing silo with cement screw conveyor and control panel. The unit has operated for 10 hours. Hour counter on the control panel. Technical manual available. Fpjdpfx Aasyrywlo Esd

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Fjdpjyrncisfx Aa Ejpd Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: ready for operation (used), Techmaflex Scrimp 350 Hose Crimping Machine Crimping Range: 4-130mm Opening with dies: +54mm Crimping force: 350 t Opening without dies: 180mm Jaw base length: 115mm Dimensions: 765mm x 400mm x 750mm Fsdpfxsyrd Nfs Aa Espd Weight: approx. 262 kg You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided (requirement: valid VAT ID number). Subject to prior sale. Visit our shop and check out our other offers. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description of the item are possible and reserved.

Condition: used, functionality: fully functional, machine/vehicle number: 02836/02, Year of construction: 2002, load capacity: 26 kg, lifting height: 7,500 mm, fuel type: electric, overall weight: 48,000 kg, We offer this used Galvi N-250 overhead crane, year of manufacture 2002. Manufacturer: Galvi S.p.A. Brake type: N-250 Serial number/year: 02836/02 Lifting capacity: 26 t Weight: 48 t Fedpfoyrcacsx Aa Espd Fully functional and operational If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: ready for operation (used), Een enkelkops, incrementeel mesaangedreven dwarszaagmachine voor het zagen van grote secties, ontworpen voor 90°-sneden. Een belangrijk kenmerk van dit product is de optimale snijkwaliteit, gecombineerd met herhaalbaarheid en nauwkeurigheid. De mesaanvoer is pneumatisch. 2 verticale pneumatische klemmen 2 horizontale pneumatische klemmen Voorbeelden van snijtechnieken: - 600 x 30 mm (maximale breedte van het werkstuk) - 90 x 250 mm (maximale werkstukhoogte) - 300 x 210 mm - 500 x 130 mm - diameter 250 mm Dia saw / abrasive - disk: 650 mm Fodsyq Tv Eepfx Aa Ejpd Turningspeeds: 2800 rpm Power needed / motorpower: 5,5 kW

Year of construction: 2026, condition: used, Tank capacity: 270 l Fpedpfxeyq R Apo Aa Eod Maximum flow rate: 0.92 m³/h Motor power: 5.5 kW Refrigerant dryer: Yes

Condition: good (used), Golfcar CLUBCAR PRECEDENT 4-seater Golfcart 2007 with Charger, 4-seater with flip-flop cargo box. Video can be sent via Whatsapp. Ongoing inventory, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a changing stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, under AS-IS conditions, without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance; we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Fpsdpfxsyq Ngae Aa Ejd

Year of construction: 2024, condition: new, functionality: fully functional, For sale: Sheet metal decoiler for coils. The machine is brand new, unused, from 2024, and in fully operational condition. Fpjdpsypgghsfx Aa Esd Machine weight: 2,700 kg Dimensions: 3.25 m x 1.4 m x 1.8 m Power: 8 kW Coil decoiler for widths up to 1,500 mm, with a capacity up to 5 tons.

Condition: good (used), Video can be sent via WhatsApp. Ongoing stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices, in 'AS-IS' condition without warranties (see our general terms and conditions). You are welcome to arrange a viewing and/or test drive by appointment, free of obligation. Please call in advance, as we are not always on site. Fpedpjyn Rcdofx Aa Eod Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland