Used Dz 750 for sale (4,168)

Condition: used, Year of construction: 2009, operating hours: 6,164 h, Doppstadt IDC000123 - manufacturer: Doppsttadt Pedpevy S Dpsfx Aazsrb - model: DZ 750 Kombi - year of production: 2009 - gross vehicle weight: 46 000 kg - working hours: 6145

Condition: excellent (used), Year of construction: 2020, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: 1172799, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, Prsdpfx Aox Uznfeazeb 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Through spindle coolant, C Axis 360deg Rotation, B Axis -35deg to + 100deg, High speed machining enabled Spindle Speed 12,000rpm, 40 Tool ATC 2020 machine , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1172799 Wireless probing.

Condition: used, Used Hosokawa Nauta type conical mixer, approximately 750 litre working capacity. Prjdpozbuhdsfx Aazjb

Condition: used, functionality: fully functional, Procure 750 UV Oven made by 3D Systems Used but in full working order. 1 owner from new. Machine in my warehouse in UK. Can put on pallet ready to load. Prjdpfxszxaafe Aazob Contact me for more info.

Condition: excellent (used), Year of construction: 2010, CNC lathe ECOCA MT-208MC 750 YEAR OF MANUFACTURE: 2010 CONTROL: Sinumerik 828D Technical data: Work area * Swing diameter over bed: 525 mm * Swing diameter over cross slide: 384 mm * Max. turning diameter: 250 mm * Max. machining length: 750 mm * X-axis travel: 175 mm * Z-axis travel: 537 / 787 mm Main spindle * Spindle speed: 750–4,800 rpm * Spindle bore: ASA A2-6 * Spindle bore: Ø 62 mm * Draw tube diameter: Ø 52 mm * Front spindle bearing: Ø 100 mm * Spindle taper: 1:20 * Chuck size: 8 inches * Spindle motor: 7.5 / 9 kW * Optional, according to manufacturer: 9 / 11 kW Axes * X-axis motor: 1.6 kW * Z-axis motor: 3.0 kW * Rapid traverse X-axis: 24 / 20 m/min * Rapid traverse Z-axis: 24 / 20 m/min * Guides: Linear / flat guides (depending on the model) Tool turret * Powered servo turret Baruffaldi Predpfx Aasz Hl Eaozeb * Tool stations: 12 * Tool holder: VDI * Max. outer turning tool: 20 mm * Drilling bar diameter: Ø 40 mm Tailstock * Quill diameter: Ø 58 mm * Quill stroke: 88 mm * Tailstock travel: 415 / 665 mm * Quill holder: MK4

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, operating hours: 10,000 h, machine/vehicle number: 3936990, Equipment: all wheel drive, compressor, emergency stop, hydraulics, Complete MacFab Wet-Cast Concrete Panel Production Line and 29 steel moulds. Comprehensive Mould Package for the production of concrete sectional garages. Alternatively the moulds could be altered to produce products in a variety of sizes, shapes, textures and colours. Excellent / In Perfect Working order In daily operational use. Available for live operational viewings. Location: United Kingdom Terms: Ex Works (EXW) – Buyer to arrange decommissioning and transport. Overview, An exceptional opportunity to acquire a complete, turnkey precast concrete panel manufacturing setup from industry-leading manufacturer MacFab. This system is not sitting in storage; it is currently in day-to-day production, meticulously maintained, and performing to perfect operational standards. Ideal for an established precast yard looking to rapidly scale capacity, or an agricultural/civil contractor looking to bring high-volume panel manufacturing in-house without the long lead times of ordering new plant equipment. Pjdpfjzndccsx Aazsrb Fully operational hydraulic systems, premium vibration consolidation setup, and robust chassis engineering. Regularly serviced and completely reliable. 29 Heavy-Duty Steel Moulds Included: A massive inventory of robust commercial steel panel moulds engineered for high-cycle wet-cast production. Excellent face-side finish quality and squareness. Complete Turnkey Solution: Includes all necessary integrated controls and ancillaries to begin pouring immediately upon reassembly Zero Operational Risk: Buy with 100% confidence. Because the machine is in active use, buyers can verify hydraulic integrity, vibration consistency, and overall cycle efficiency first-hand. Massive Mould 29 commercial steel moulds independently represents substantial capital expense and manufacturing lead time. This package provides immediate scaling capability. Live Video / Inspections Available: Serious buyers are invited to visit the facility to see the machinery running in real-time. PRICE £59950.00 Plus VAT 70270 Euros (Open to sensible offers for a swift transaction) Sold Ex Works (EXW).

Condition: used, Year of construction: 2020, functionality: fully functional, total height: 900 mm, total length: 3,000 mm, total width: 1,500 mm, overall weight: 1,028 kg, Siegmund Welding Table Professional 750, Plasma-nitrided Size: 3000 x 1500 x 150 mm Podpfx Aaoz Dpwnozerb System 22 mm with diagonal grid and scale with base, standard version, 700 mm Only the table is for sale, without any accessories.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 180 mm, travel distance Z-axis: 750 mm, controller manufacturer: SIEMENS, number of axes: 2, Horizontal turning machine manufactured in 2013. This Weiler C30X 750 features a Siemens control system, ensuring reliable operation and precision. If you are looking to get high-quality turning capabilities, consider the Weiler C30X 750 machine we have for sale. Contact us for further details. Pedpfoz Hlcfsx Aazjrb - Control: Siemens Technical Specification Counter Spindle No Driven Tools No

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 152 mm No of Grippers: 11 Pjdpevrrldofx Aazjrb Thin sheet loading: yes

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Manufacturer: WEILER Type: E 30 X 750 Cycle Turning Machine Year of manufacture: 2018 Prjdpfx Aaszy Sr Njzjb Condition: Used Operating hours: 8563 h

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Prjdsz Dgvnspfx Aazob Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: used, Year of construction: 2013, functionality: limited functionality, overall weight: 18,500 kg, We are offering this used KraussMaffei 200-750 EX injection molding machine, manufactured in 2013. Predpjzxk Rujfx Aazjb Type: KM 200-750 EX International size designation: KM 750 EX/200 Year of manufacture: 2013 Machine No.: 61019432 Machine weight: 18,500 kg Please note: The machine is sold without machine conformity, as the safety door on the operator side is missing. The control panel is mounted on the rear of the machine. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Psdpfxozw N E Is Aazjrb #Tags: DNM750 | DNM-750

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Pedpfjz A Iarsx Aazjrb Inspection under power possible by arrangement.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Very well-maintained Paul double-blade saw, type KME 2 750 R, from a small workshop. Cutting height 125 mm. Cutting width 750 mm. Hydraulic feed, continuously adjustable from 0 to 70 m/min. Hydraulic width adjustment with grid system. Installed drive motor, 31 kW. Safety device. Double anti-kickback protection with locking mechanism. Electrical control cabinet with control system. Zero-adjustment and blade guide. Various saw blades and spacer rings. Psdez Hcz Eopfx Aazsrb Roller table for the infeed side. Optional 9 m long spiral roller conveyor for the outfeed side. Photos show the original condition.

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: The machine was a demonstration unit, equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW Prodpjzbk Iysfx Aazeb -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable Quantity: 1 piece available -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: used, Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Predpfozy Ilfex Aazeb Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2015, Specifications Condition Used Year 2017 Clamping area of the table 500 mm Travel in the x-axis 762 mm Travel in the y-axis 508 mm Travel in the z-axis 508 mm Spindle speed 0 - 12000 rpm Number of driven axes 5 Cooling through the spindle YES Cooling pressure bar Spindle taper Prjdpfxezxw Ite Aazjb 40 Max. workpiece weight 300 kg Tool magazine YES Number of positions in the magazine 40+1 B-axis +35/-110 ° C-axis 360 ° Max. table load 300 kg Max. spindle torque 122 Nm Rapid traverse 22.9 m/min Machine weight 6463 kg Total power input 28 kVA

Condition: excellent (used), Year of construction: 2019, MAXXMILL 750 5-SIDE UNIVERSAL MACHINING CENTER SIEMENS 840D SL, 15,000 RPM 5-Side Universal Machining Center with integrated tool magazine, 30 positions Control: Sinumerik 840D-sl / OPERATE o SHOPMILL dialog programming o USB interface o Network drive / Ethernet o 22" TFT color touch monitor o 3D simulation o EMCONNECT Spindle: Motor spindle, water-cooled Spindle power: max. 20 kW Pedpfx Aoz Anw Hjazjrb Speed: 50 - 15000 RPM Torque: max. 100 Nm Tool holder: ISO 40 DIN 69871 Drawbar: ISO7388/2 Type B (not included in the basic machine) Travel: X=750+50mm, Y=610mm, Z=500mm Spindle nose – table distance: 150–650 mm Rapid traverse X-Y-Z: 30 m/min B-,C: 25 RPM Table: driven by worm gear Cast table, ground with T-slots Number – Width – Spacing: 5 – 14 – 100 Clamping area: 750 x 600 mm Table load maximum: 300 kg Tool changer: Drum magazine with 30 tool positions. Tool change time (chip to chip): 4.9s (VDI2852) Standard equipment: o Advanced Surface (Siemens option) o LED work area lighting o Spindle air blow-out device for cleaning the tool holder during tool change o Central lubrication o Coolant pump 2 bar o Coolant tank 250 liters o Leveling elements (5 pieces) o Tool magazine door for maintenance o Direct measuring system B-axis Year of manufacture: 2019 Machine no.: M-007.038.19 includes: 8AO-PRESET750SIE LASER DEVICE MARPOSS 8AO-VOLREMSIE630 ELECTRONIC HANDWHEEL 8AO-ADDREFMM750EI AIR - LIQUID COOLING 8AO-TRASPMM750 HINGED BAND CHIP CONVEYOR MM750 8AO-IMPLAVXX50 SPRAY GUN 8AO-COMM750XX01 STANDARD PACKAGING 8AO-MAGUT750XX05 TOOL MAGAZINE FOR 40 TOOLS MM750 8AO-CICMI750SIE AUTOMATIC WORKPIECE MEASUREMENT WIRELESS 8AO-SUPTAVOLAMM750 FRONT SUPPORT TABLE 8AO-APPLGRMM751 ROTARY TABLE THROUGH SPINDLE 8AO-PLU08S00119A AUTOMATIC LOADING DOOR RIGHT MM750 8AO-ILU08X00119A MACHINE ROOM FLUSHING 8AO-ROTTSIE750 GLASS SCALE 3 AXES X-Y-Z SIEMENS 8AO-TRASFUM750MM 40-POSITION MAGAZINE ISO40 ACCORDING TO DIN69872 8AO-COPSUPXX750 UPPER MACHINE COVER MAXXMILL 750 8AO-INTROB012 STANDARD HANDLING INTERFACE PROFINET 8AO-CIN250LMSIE KINEMATIC MEASURING CYCLE 8AO-APPLEN750SIE DIRECT MEASURING SYSTEM B AND C 8AO-MM7503D 3D DATA MODEL MaXXmill 750

Condition: used, Year of construction: 2012, x-travel 760 mm y-travel 460 mm z-travel 460 mm control TNC 620 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 14 / 10 kW Torque 89 / 63,7 Nm tool taper SK 40 table surface area 900 x 410 mm max. table load 350 kg T-slots 4x number of toolpositions 24 pos. max. tool diameter 130 mm max. tool length 200 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 36 m/min total power requirement 20 kVA weight of the machine ca. 3,3 t dimensions of the machine ca. 3,0 x 2,5 x 2,9 m Prsdpezgibusfx Aazjb CNC Machiningcenter Vertical SPINNER - VC 750

Condition: excellent (used), Year of construction: 2014, Oven volume: 2.366 m³ Max. temperature: 750 °C Power rating: 84 kW Weight: 3.7 t Transport and loading can be organized across Europe for an additional charge upon request. Prices are subject to VAT. Inspection possible by prior appointment. Please contact us—our team looks forward to assisting you. Prodezvnktjpfx Aazjb Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Are you looking for a high-quality yet affordable machine for your production? Or looking to sell yours? For further information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Pjdpfxjzt Iaco Aazerb Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Predpfx Aozy Inmsazsb Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 1997, functionality: fully functional, Used AUTOMATIC STRAPPING MACHINE FOR PACKAGING LINE WITH MOTORIZED ROLLERS, ROBOPAK BRIDGE 750 TP-601B. Prsdpezhufbefx Aazeb

Condition: excellent (used), Year 2017 5000 Hrs CAT Powered Double Deck Vibrating Grizzly Unit. Bofor Bars Top Deck & Mesh BTM Deck 19,000 kgs Extremely Tidy Unit Predpfx Aeyg Ryaeazob Ready To Go Straight To Work