Used heavy-duty shelves for sale (196)

Condition: good (used), Year of construction: 2019, Pallet Racking, Nedcon, Height 2.50 – 2.70m, Beam Lengths 3m and 4m, 500kg per pallet, max. 5,600 pallet positions, - used - : Price ex location: only €65,000 (net), dismantled, packed, and loaded, for full purchase including numerous short beams and both short and long end-of-aisle protectors / guard rails (for double and single runs)! Price for partial quantities: Frames: €45 each Beams: 2m: €14 each 3m: €18 each 4m: €22 each Manufacturer: Nedcon Type: Pallet Racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500kg Number of frames: approx. 900 units Most frames are equipped with upright protectors Frame height: 2.50m and 2.70m Frame depth: approx. 1.10m Beam lengths: 4m min. 624 units (beam height e.g. 12.5cm / support approx. 5cm) 3m min. 518 units (beam height e.g. 8.5cm / support approx. 4cm) Some 1m and 2m also available Condition: good Kledpsw D Ewvefx Addsl Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Condition: excellent (used), Mesh Gratings / Shelf Panels for Pallet Racks for 180, 270, and 360 cm Bay Widths Specifications: Material finish: hot-dip galvanized Overall width: approx. 1,340 mm (crossbar direction) Overall depth: approx. 1,080 mm (load bar direction) Suitable for frame depth: 1,100 mm Clear support span: approx. 990 mm Beam support: approx. 50 mm Mesh size: approx. 33 x 66 mm Load bar height: 30 mm or Material finish: hot-dip galvanized Overall width: approx. 1,330 mm (crossbar direction) Overall depth: approx. 1,040 mm (load bar direction) Suitable for frame depth: 1,050 mm Clear support span: approx. 940 mm Beam support: approx. 50 mm Mesh size: approx. 45 x 70 mm Load bar height: 30 mm We stock mesh gratings for the following rack depths: 1 m, 1.05 m, 1.1 m or 1.2 m This mesh grating is the perfect solution to optimize your racking and provides excellent support for your storage requirements. Price on request – Get professional advice! Looking for additional shelf panels or mesh gratings in other versions? No problem! Our team will be happy to help you design a customized racking solution tailored to your individual requirements. Do you have a rack you wish to sell? Simply send us photos and measurements, and we will provide you with a fair offer. Contact us: Kedpfop Duf Nsx Addsll BLB GmbH – Contact person: Mr. Dominik Blum Tel. Take advantage of our delivery service directly to your site! If you have any questions, please do not hesitate to contact us – we look forward to your call or message!

Condition: good (used), BLB GmbH – Supplier of new and used warehouse technology. We provide racking systems, industrial trucks, accessories, and further warehouse equipment. This listing includes the following: Used pallet racking Manufacturer: Bito Type: P25 Frame condition: used / pre-assembled Beam condition: used Quantities: Approx. 88 frames – height 4,500 mm / depth 1,100 mm / max. bay load 13,000 kg / galvanized Approx. 320 beams – length 3,600 mm / capacity 3,500 kg with evenly distributed load, painted green Including locking pins Ksdpfx Adoxqpddodjll Larger or smaller quantities possible! Please inquire about your required quantities. Additional accessories available at extra cost: Floor anchors Column protectors Crash barriers Wire mesh decking Price is gross including 19% VAT. An invoice showing VAT will be issued. Collection by the customer is welcome / Free loading / Nationwide shipping can be organized / Please inquire about shipping costs. Sale of used items without warranty or guarantee. Errors and prior sale of used goods expressly reserved.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 12355, Offer 25080 Movable panel rack with 10 movable material stands Kljdev Ra Idopfx Addel Technical specifications: - Stand - Shelf dimensions / support dimensions W 3000 x H 1800 mm - Shelf depth / footprint 180 mm - Maximum load per shelf: 2000 kg - Slide-in support bracket - Track rail L 4750 mm - Total space requirement approx. L 4750 x H 2200 x D 4000 mm - Weight approx. 3000 kg

Condition: good (used), Year of construction: 1993, Offer 21377 Technical data approx: - 21 storage levels / compartments with shelves - 18 x shelf height approx. 100 mm - 3 x compartment height approx. 150 mm - Shelf - total width inside 1380 mm - Shelf - total length 2600 mm - Space requirement W 1500 x D 2600 x H 3480 mm - Folded transport height 2600 mm Ksdpfx Ader Hnl Redsll

Condition: good (used), Year of construction: 1993, Offer 22459 Technical data approx: - 13 storage levels / compartments with shelves - 11 x shelf height approx. 100 mm - 2 x compartment height approx. 150 mm - Shelf - total width inside 1380 mm - Shelf - total length 2600 mm - Space requirement W 1500 x D 2600 x H 2350 mm Kljdpfsr Hnvlex Addol

Condition: good (used), Gemac shelving system type Normafix, approx. 1000 meters available Size 131 x 120 x 230 cm Uprights powder coated blue Shelves galvanized Clear shelf width 1310 mm Shelf depth 1200 mm Shelf height 2300 mm 7 shelves each shelf load 200 KG Bay load 1400 KG approx 750 pieces available The price refers to 13,10 meter 22 uprights 70 shelves Klodegxpqpopfx Addsl incl. securing and fastening devices

Condition: ready for operation (used), Year of construction: 2016, Support profile: IPE 180, upright load per upright side: 4.8t, cantilever arm load: 1.03t, arm length: 600mm. For the storage of heavy, bulky materials and goods, universally applicable in halls, for manual or automatic operation, stationary or mobile installation possible, single-sided or double-sided racks, bolted cantilever arms, robust design, bolted upright construction, bolting system: support profiles are bolted with longitudinal ties to form rack rows and braced with cross ties in every 4th rack bay. An on-site inspection is possible, the rack has already been dismantled. Kljdpfx Adow U Uagjdsl

Condition: ready for operation (used), Year of construction: 2008, Includes (1) 12x upright 2C815-80x50, 1825mm, RAL-2001 red orange, max. load per pair: 2.26t (2) 352x upright 2X1115-110x50, 2700mm, RAL-2001 red orange, max. load per pair: 3.0t (3) 78x shelf frame M80 5500x1100mm, RAL-5003 sapphire blue, already dismantled, on-site inspection is possible. Kjdpfxsum U Srs Addjll

Condition: used, Beams 3,100 mm, 200 pieces or alternatively Kjdpfx Adeuc T Enedjll Beams 2,800 mm, 200 pieces Uprights 1,050 mm x approx. H 8.5–10 m, 15 pieces The number of beams can be increased for an extra charge. Loading facility available.

Condition: excellent (used), Year of construction: 2023, total height: 2,000 mm, total width: 1,100 mm, Suffel racking system 50 frames 2000mm x 1100mm x 85mm Kedpfx Ajw Np Rcjddoll 150 beams 3600mm x 100mm Shelf panels 38mm Bay load capacity 5,320 kg with a buckling length of 1,400mm Pictures show the scope without the connecting elements. Frames and beams have been covered with tarpaulin.

Condition: good (used), Rack Leg Protector Used equipment, good condition, see pictures. + The plastic impact guard protects rack uprights in your warehouse or outdoor areas. It provides very high shock absorption and is easy to use: simply clip the rack guard onto the upright. + Rack protection made of durable polyethylene + Flexible, resilient, and dimensionally stable + Absorbs impact forces of up to 2.4 tons + Withstands temperatures down to -40°C + Signal yellow for excellent visibility Rack Armour upright protector made of plastic for a long-lasting racking system Technical data: Application area: Indoor and outdoor Height: 600 mm Colour: yellow Wall thickness: 7 mm Net weight: approx. 1.7 kg Temperature resistance: -40°C Negotiable price: €13 net per piece ex stock From 50 pcs: €11 net per piece ex stock From 100 pcs: €9 net per piece ex stock Item in stock. No guarantee or warranty. Transport and installation available on request. Inspection possible at any time by appointment. Kjdoq Evpfopfx Addell Further information on request. Constantly over 5,000 running meters of pallet racking from various manufacturers in stock. (Specifications and prices subject to change and prior sale. Please see our T&Cs. All prices excl. VAT, ex stock.)

Condition: excellent (used), functionality: fully functional, Clear shrink hood 1600 x 2F 550 x 1900mm (h), 40 microns, circumference 5400mm. Condition: approx. 4,100 pcs available. The hood serves as protection for goods during transport, shields against moisture, secures palletized goods, and can also be used as a large bag. This offer applies to 100 hoods – price €142. If you are interested in larger quantities, please contact us. Transport at the buyer’s expense; discount available for purchase of the entire stock. Please provide a reference number in your response to simplify communication, e.g. via WhatsApp. Klsdpfx Aoxwubhjddsl

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. Kljdjmhhypjpfx Addel The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Kledpfx Adjmhh Dhodsl The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Kedpfx Ademhh Dzodoll - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Klsdpfsfdkb Tsx Addsl Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Ksdpfx Adjmhh Anjdell - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Kjdpfx Asguk A Hjddell Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Kodpfx Aoguk Dkjddoll - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Kjdpfx Aomhh Dteddoll - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Kljdpfx Ajguk Dvoddol - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), 1x pallet racking by Jungheinrich Mp-B Specifications: - Height: approx. 600 cm - Depth: approx. 110 cm - Length: approx. 15 linear meters - OFFER - Condition: good - Uprights in blue - Beams 270 cm - Beams in yellow Rack consists of: - 06 x upright approx. 600 cm x 110 cm - 30 x beam approx. 270 cm - Provides 60 pallet spaces. Price: Klsdpfxswym T Rj Addel €2150 net plus VAT. You will receive an invoice with VAT shown separately.

Condition: excellent (used), Year of construction: 2019, load capacity per storage section: 600 kg, For sale: WEMA grates in perfect condition Klsdpfjxmkzpjx Addjl - 1800 pieces - weight: 20 kg - dimensions: 99.5 cm / 88.3 cm - mesh size: 35/35 mm

Condition: excellent (used), 250 pieces of heavy-duty grating 72 x 114 cm Kodpstuvb Ajfx Addsll Used goods, very good condition, see pictures Hot-dip galvanized Weight load: approx. 450 kg/m². Dimensions: 720 x 1140 mm Mesh width: 20 x 30 mm Support bar height: 45 mm Material thickness of support bar: 3 mm Negotiable price: € 38 net per piece from stock Larger quantities on request! Numerous gratings with different mesh widths and support bars available! Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. Further information on request. Always over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)