Used Forging Manipulator for sale (503)

Condition: used, Year of construction: 2006, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. 4 suction pads, each with a diameter of 140 mm Connection: 400V 16A Good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only Tsdpfx Ajy Hf Itsl Aec

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2693/4533, Technical data: IHF Jungenthal manipulator, handling device, lifting aid, lifting arm Model Vector 130 (130 kg payload) Manipulator available in quantities of 2!!! Payload at full extension: 30 kg (dependent on equipment/configuration) Todpfxozv Et Eo Al Asc Height: approx. 4.2 m Upper arm: approx. 3.2 m Reach: approx. 1.6 + 1.9 m = 3.5 m to the articulated arm (height 2.1 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 600 kg Mounting plate 75 x 75 cm Mounting/attachment equipment for tire handling (see pictures) Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection only by prior appointment.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4407, Technical data: IHF Jungenthal manipulator handling device, lifting aid, lifting arm Model Vector 180 (180 kg payload) Payload at full extension 75 kg (dependent on equipment/configuration) Height: approx. 3.75 m Upper arm length: approx. 3.2 m Reach: approx. 1.5 + 1.35 + 0.8 m = 3.65 m, articulated arm (height 2 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 750 kg Dowel plate 75x75 cm Attachment/mounting equipment for round material/shafts, etc. (see images) Swivel range 360° Manipulator is disassembled and immediately available. Tsdpfx Aszv E Dwel Asc Item location is 75053 Gondelsheim See images Shipping by freight forwarder or collection only after prior arrangement.

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Tjdpfjq U R T Nox Al Ajc Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Tedpoq U Sa Ssfx Al Asc Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: like new (used), functionality: fully functional, 3-axis positioning system, rotating, lifting, and pivoting, 7500 kg load capacity. Condition: absolutely like new, only used for measurement purposes. Position can be set using limit switches. Includes hand-held remote control. Faceplate diameter: 1000 mm. Faceplate speed: 1 RPM, including speed controller. Torque: 5500 Nm. Maximum turning radius: 1700 mm. Tilting range: +/- 180° relative to the horizontal faceplate. Tilting moment: 14500 Nm. Tilting speed: 180°/min. Tilting axis: 200 mm above the upper edge of the faceplate. Lifting speed: 1000 mm/min. Lower faceplate height: 500 mm. Upper faceplate height: approx. 2000 mm. Tedpfxozvqwis Al Aec Includes complete documentation, plans, operating instructions, and EC declaration of conformity. New price: approx. €75,000.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1741, Technical specifications: IHF - Quick Lift QLA 75-S-GM manipulator, handling device, lifting aid Load capacity at full reach: 75 kg, at the gripper: 25 kg Overall height: approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight: approx. 400 kg Swivel range: 270° + 90° (via articulated arm), connection to 400V 16A Tedpfx Alozv Hxps Asc With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is dismantled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities of 80-5000 kg; please inquire. See pictures. Shipping via freight forwarder or collection by appointment only.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Swivel range 270° + 90° (via articulated arm), connection to 400V 16A Tjdpfszv Hw Eox Al Asc With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Todpfsy Ud N Sox Al Aec Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Video showing the machine in operation available!

Condition: excellent (used), functionality: fully functional, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 1000 kg load capacity PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000kg / 2000 Kg LOAD CAPACITY (KG) 1000 / 2000 Kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque Tedpszubw Rsfx Al Ajc CLAMPING PLATE (NM) 1400 BENDING MOMENT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions.

Condition: used, Year of construction: 1980, pressure . t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight); Dango and Dienenthal HSM 12 manipulators; Merz bogie-hearth furnace, hood-type furnace, etc.; wedge- ram spare parts, etc.; mechanical workshop; oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Tsdpozfwt Asfx Al Aec possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, For sale is a machinery package consisting of 10 robot arms from the manufacturer ABB, along with the necessary accessories! The package is composed as follows: 8x Welding robots for external connection 2x Handling robots 10x Control cabinet 10x Main power cable for robot cabinet 10x Communication cable for robot cabinet 10x Panel with connection cable to the cabinet 1x 40" HC sea container TECHNICAL DETAILS Reach: 2.55 m Handling capacity: 235 kg Center of gravity of the payload: 300 mm Wrist torque: 1,324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm MACHINE DETAILS Control cabinet type: IRC5 M2004 Operating panel: FlexPendant Tjdpez D H Hysfx Al Aec Operating panel model: DSQC 679 Input voltage: 3 × 400 V AC Frequency: 50–60 Hz Current consumption: 20 A Operating hours: between 28,500 and 39,000 hours EQUIPMENT Cable set for main connection cabinet–robot Leoni mounting Cable set for handling or welding Note regarding dismantling and loading: As can be seen in the pictures, the manipulators are located in the 40" HC container. The robots are screwed onto the pallets (with 2 screws each), and the control cabinet is secured to the pallet with lashing straps. Further securing/lashing must be carried out by the buyer.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, stroke length: 800 mm, ram plate width: 1,200 mm, ram plate length: 2,200 mm, overall weight: 100,000 kg, 2022 Macrodyne 1500T Hydraulic Hot Forging Press. Condition Very Good. Weight 100000 kg. Refer to attachments in the documents sections for more information. Unit available immediately. Buyer responsible for removal, contractor must be licensed and insured. MAXIMUM PRESSING FORCE 15,000 KN USABLE BED BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm USABLE RAM BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm DISTANCE BETWEEN TENSION MEMBERS (L-R) 2400 mm DISTANCE BETWEEN TENSION MEMBERS (F-B X HEIGHT) 750 mm X 1473 mm DAYLIGHT 1400 mm SHUT HEIGHT 600 mm STROKE 800 mm TOP EJECTOR CAPACITY (STATIONS 3 & 4) 750 KN Tsdjz Hb T Hjpfx Al Asc TOP EJECTOR STROKE (STATIONS 3 & 4) 90 mm BOTTOM EJECTOR CAPACITY (STATION 3) 750 KN BOTTOM EJECTOR STROKE 200 mm MAXIMUM PUNCH WEDGE CAPACITY (STATION 4) 6000 KN

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. The machine is complete with separate anvil/base and electric motor. Technical data: Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Todpfxozxd E So Al Ajc Anvil/base weight: approx. 1,000 kg Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Serial/identification marking on the machine: “87 №149” Location: Estonia Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Inspection is possible by appointment. More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. Tjdpfx Alezcdluj Ajc ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0365, DEMAG KBK overhead crane, span approximately 4x4m – expandable upon request! Load capacity / lifting capacity: 500 KG - 0.5 tons Technical data of the system: Overhead crane track made of Demag KBK2 rails Todpfx Aeztutvol Aoc The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Includes Dalmec manipulator PFS 120KG NL Articulating boom, rotatable 360 degrees, with approximately 3m reach The crane is disassembled and immediately available Very good condition, see pictures The item is located in 75053 Gondelsheim Shipping via freight forwarder or collection only by prior appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please inquire about your overhead crane with the required load capacity and dimensions.

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, table load: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 - 1500 mm Suitable for welding, assembly, processing, etc. With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm. Todpfx Ajxbh Dqol Aec With wireless remote control Rotation range 360° infinite Swivel range 360° infinite Lift: 1000 - 1500 mm Arm outreach radius: 1 meter

Condition: excellent (used), functionality: fully functional, load capacity: 4,000 kg, Severt manual column lift and rotation device, including matching perforated table 1500 x 1500 x 200 mm for bolting, included. Optionally available with tooling for perforated table accessory set. Excellent condition (see video). Hydraulically height adjustable, minimum 800 mm, maximum 2400 mm. Load capacity 4000 kg. Perforated table 1500 x 1500 x 200 mm, type 28 mm. Todpfx Alsyli Uys Aec

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular adaptability and custom special versions available Tedpfxoxbhp Ho Al Aec Operating principle: The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm - Arm reach radius: 1.2 meters

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Welding turntable, L-manipulator, positioner, in excellent condition, includes additional clamping plate. Rotating and tilting (overhead), steplessly adjustable speed. Mechanical height adjustment from 800 mm to 1100 mm. Outreach 1000 mm. Overall height 1800 mm. Length 3000 mm. Width 1100 mm. Clamping plate diameter 1000 mm. Tedsylkn Iopfx Al Ajc

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Tsdpfxsyupl De Al Aec Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: excellent (used), functionality: fully functional, arm lifting capacity 60 kg, length 410 cm; base length 350 cm; CE marking; year 2001 Tjdpfx Aljzz Np Us Ajc

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Tedpozypd Nefx Al Ajc Strokes per minute: 100/min Throat depth: 750 mm Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Ram weight: 750 kg

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 2260081, load capacity: 400 kg, Hello, I have this fully pneumatic DELMEC remote arm, which can lift and move up to 400 kg with one hand. The machine has been used very little; it's a showroom model. The machine is complete and in perfect working order. It can be sold as is, delivered, and even installed (to be determined together). Tjdswcpl Uopfx Al Ajc

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: TD2002, Schmalz Vacuum Lifter with 50kg Payload / Lifting Capacity Dimensions: 30 x 30 x 30 cm, Weight: 11 kg Equipped with 1 suction pad, approx. 150 mm diameter 1 compressed air connection Tsdpfx Ajupyn Rol Aoc Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only