Year of construction: 2011, Condition: good (used), The BD Accuri® C6 is a digital basic flow cytometer, which is equipped with a Blue (488nm) and a Red (640nm) lasers, two light scatter detectors (FSC and SSC), and four fluorescence detectors. The default configuration of the BD Accuri® C6 is similar to the FACSCalibur-2 (3-Blue 1-Red) with filters optimized for the detection of fluorochromes such as FITC, PE, PerCP, and APC. The Selectable Lasers Module allows operation of the system in two additional configurations (2-Blue 2-Red, and 4-Blue) and significantly expands the fluorochrome combinations that can be analyzed. BD Accuri® C6 is manufactured with standardized fluorescence performance so that users do not need to adjust detector voltages. Data is digitally collected over a 7-decade dynamic range (16 million channels of digital data), making all data available to users as needed. A unique low-pressure pumping system drives the fluidics. A sheath-focused core enables event rates of up to 10,000 events per second and a sample concentration of over 5 x 106 cells per mL. In addition, the system derives sample volume and can calculate absolute counts or sample concentration per microliter. The non-pressurized system of BD Accuri C6 supports any brand of sample tubes – 12 x 75 mm or smaller (including microcentrifuge tubes), made of polypropylene or polystyrene. Dksleix Ntyoitdx Nol BD Accuri® C6 CFlow SAMPLER supports the high throughput and fully automated acquisition from 48- and 96-well plates and deep-well plates. It is also supplied with a 24-tube rack for the walk-away acquisition of standard 12 x 75-mm tubes. Software version 1.026421

Condition: good (used), Machine number: 06363 Dkjlitdxspbvi Ds Nsl Type / Model: E1M5 Vacuum: Displacement: 5.6 cm³ Inlet connection: KF 25 Exhaust port: 15 mm nozzle Engine oil: H/C Cooling: Air Connection: 0,25 kW 240V Condition: Weight: 17 kg Dimensions: 450 x 150 x 220 mm

Condition: new, Functionality: fully functional, Year of construction: 2022, conveyor belt length: 4,500 mm, conveyor belt width: 1,400 mm, infeed height: 55 mm, infeed width: 1,460 mm, machine/vehicle number: 364290, TECHNICAL DETAILS Use: Continuous furnace for medical technology Stainless steel housing (LxWxH): 3,750 x 1,720 x 675 mm Surface conveyor belt (LxW): 4,500 x 1,400 mm Conveyor system Conveyor belt height: 1,050 mm Openings belt inlet/outlet (WxH): 1,460 x 55 mm Free area belt inlet: approx. 250 mm Free area belt outlet: approx. 400 mm Conveyor belt operation: Cyclic operation Loading and unloading is carried out using robot handling and Profinet communication. MACHINE DETAILS Dimensions including belt and substructure (LxWxH): 4,500 x 1,720 x 1,510 mm Substructure made of stainless steel profile tube, height adjustable: ± 30 mm EQUIPMENT - Infrared heating fields for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel substructure for easy transport Dolisv Akfqetdx Nskl - Mechanically lockable service doors with viewing window - Control panel attached to the left side of the inlet - 6 service doors with viewing window (mechanical locking) - 2 exhaust air nozzles at the top (Ø 82 x 105 mm) - Traceability is ensured via the OPC-UA interface. HISTORY This oven was planned for a clean room area of a fully automated production line for the production of rapid corona tests and tests to detect multi-resistant hospital germs.

Year of construction: 2023, operating hours: 0 h, Condition: new, tank capacity: 2,000 l, 2 X Biostat STR® Generation 3 is a single-use bioreactor developed by Sartorius. - Scalability It offers scalability from benchtop to production scale through conventional design and geometric similarity with a working volume range from 12.5 L to 2,000 L. - Capabilities: It is designed to achieve superior cell viability, cell density, and increased product purity, thereby lowering the risk of batch loss or inconsistencies. - Modalities: This system provides all the flexibility needed for numerous modalities, from monoclonal antibodies (mAbs) and biosimilars to plasmid DNA (pDNA), messenger RNA (mRNA), and vaccines¹. - Integrated Technology: The Generation 3 system is now available with integrated Repligen XCell ATF® Technology for intensified processes¹. - Automation Platform: The Biostat STR® Generation 3 is powered by the GMP compliant automation platform Biobrain®². - Process Intensification: Ready for process intensification through integrated Repligen XCell ATF® Technology, the Biostat STR® can help enhance productivity, reduce footprint, and lower COGs of your facility². - Quality and Consistency: The Biostat STR® system simplifies technology transfer between production scales and ensures consistent quality without surprises and re-optimization². Dslijqlcb Ietdx Nokl This bioreactor is engineered for ultimate upstream performance and can enhance speed, quality, and flexibility in process development and commercial manufacturing operations¹.

Year of construction: 2022, Condition: ready for operation (used), A double-sided stainless steel gastro kitchen is available. Including grill, deep fryer, oven, hob, cold storage cells. Dimensions X/Y/Z: approx. 4900mm/1800mm/1400mm. Djliot Hxfvetdx Nekl

Condition: ready for operation (used), SL SHEL LAB 2440-2 CO² Incubator Dry incubator Max temperature: 99.9°C Interior dimensions: 880mm x 660mm x 1920mm (W x D x H) Exterior dimensions: 1090mm x 860mm x 2230mm (W x D x H) Weight: 236 kg You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! Dkolitdov Dh N Ajx Nol You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data as well as errors in the description of the article can occur and remain reserved.

Year of construction: 2016, Condition: excellent (used), Gold standard microplate washer BioTek 405 TS many other laboratory instruments and equipment on request Djlitdxoivpcks Njkl

Condition: excellent (used), Couloscope v18, Couloscope CMS2 STEP Dkelitjvzb Umjdx Nsl

Condition: used, Functionality: fully functional, Year of construction: 2018, Weco Patternless Edging System. The set includes the software of the machines and other accessories. Year of manufacture:2018 The set includes: WecoTrace 3 scanner, precise and soft scanning, adjustable scanning speed for difficult frames. Clear, graphic color TFT crane with wide viewing angle.Graphic display of 3-D scanned information during the scanning process for direct inspection. Internal calculations of 3-D scan data to obtain exactly the correct information for machining on the machine. Modification function allows you to change the dimensions of the mold in width, height, or just at the bottom of the frame, and draw the mold to your liking. Doleuyu I Uoitdx Nokl Weco E.5 Series Patternless Edgers The WECO E.5 is a reliable patternless lens edger designed for medium to high volume optical shops. It offers highly sought after features such as integrated drilling and wrap frame processing without compromising on performance or value, making it the ideal choice for someone looking for a lens edger that can process the vast majority of eye wear in the market today. It’s sister product, the E.5s retains all of the original functionality of the E.5 for those without the need for wrap frame processing. WECO C.6 has extensive experience in the manufacture of dioptometers and centring equipment. That's why the brand developed the latest generation of locking and checking devices designed to improve your optical spectacle manufacturing productivity. Fully automatic centring is essential to maintain high quality and efficiency. Our patented WaveFront analysis technology has proven to be accurate, reliable, incredibly fast and, above all, easy to use. With speeds of up to 60 frames per hour, the WECO C.6 is therefore the perfect solution for any optician's office. It is suitable for a wide range of lenses, including bifocals and progressives. Good working condition. Please check out our other listings as well.

Condition: good (used), Rodenstock R12 eye tester, including accessories and carrying case. From depot stocks of the Bundeswehr. Used, in good condition, fully functional. Delitjp N Eunsdx Nokl Included in delivery are: Eye tester R12 power cable different test discs carrying case The instrument and transport case may show slight scratches and minor discolorations, but these do not affect the functioning in any way. The sale is exclusively aimed at traders, you will of course receive an invoice with VAT. Private buyers have the option to purchase the device "on behalf of a customer", a direct commercial sale to private individuals is expressly not taking place! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: ready for operation (used), Camera: AxioCam MRc 5, Z-drive step size: 25µm, Reflector turret: 6-position, Objective turret: 7-position, Reflector module: Brightfield ACR/Darkfield ACR, Analyzer slider: 360° rotatable, Filter diameter: 32mm, Polarizer rotation range: 90°, Table dimensions X/Y/Z: 240mm/140mm/18mm, Coaxial drive (right): 120mm, Objective: 10x-100x, Condenser: achromatic-aplanatic, Software: AxioVision 4.8, Camera: 5MP, Max. objective penetration depth: 5mm. Documentation available. On-site inspection is possible. Dslitdsuwrwbsx Nokl

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, Colloid mill, used, fully functional. System was only qualified, therefore used once to homogenize a suspension. There was no contact with hormone-containing substances. Dkolitdetmrngex Nel

Year of construction: 2018, Condition: excellent (used), Heraeus Kendro HeraCell 150 Co2 Incubator Technically and optically as good as new HeraCell 150 incubator HERAcell has instead of the instead of the usual water tray new type of water reservoir. This ensures high relative humidity (rH) and, above all and above all for short moisture recovery times. Compared to conventional CO2 incubators with water trough HERAcell achieves a moisture recovery time up to five times faster humidity recovery time. Consistent humidity Short humidity recovery times play an important role, especially when the the door of the incubator has to be opened frequently door must be opened frequently or volumes of media are processed. For devices with a water tray the air layer between the bottom and tray prolongs the moisture recovery time. The result is high evaporation rates in the cultures. HERAcell, on the other hand, ensures very short - up to five times times faster - thanks to superior thanks to superior technology: - Large water surface area (due to the use of the entire inner chamber floor) - Direct heat transfer from the Dslitdxoiv S E Ue Nskl heated floor into the humidifying water - Patented floor heating after after door opening and during O2 gassing Early water level alarm The water level is continuously monitored monitored, and an acoustic and and optical alarm signals signals in good time that water needs to be needs to be topped up. ContraCon - decontamination with moist heat at 90 °C The patented automatic decontamination system specially developed and patented for Heraeus incubators ContraCon decontamination routine has been proven in independent independent tests at 90 °C and high and high humidity to eliminate a large number of microorganisms, including mycoplasmas completely eliminated

Year of construction: 2016, Condition: excellent (used), I am selling a Leica RM2255 in very good condition, after inspection. Dslitdxjvygd Ro Nskl

Condition: ready for operation (used), Functionality: fully functional, Masterflex Peristaltic pump w/ 77601-10 head Good working condition. Please check out our other listings as well. Doliewa Thuetdx Nokl

Condition: used, Year of construction: 2019, operating hours: 5 h, Functionality: fully functional, Iosys Mirospark Dkslitdxjqwytxj Njl This combination device can be used to examine practically all common types of plastic, regardless of color, size or coating (films, foils, granulates, solid, foamed, carpets, textiles, etc.) together with their additives, such as flame retardants and heavy metals, without the need for time-consuming sample preparation. Heavily soiled or painted measuring points can simply be scraped free with a knife for cleaning.

Year of construction: 2009, Condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Delopcgy Reitdx Nekl

Condition: excellent (used), Binder BD 720 incubator used, white. Perfect tool for storing samples at a constant temperature. Convenient and reliable in use. Binder incubator with natural air circulation - model BD 720 Features: Stainless steel interior Internal glass door Preheating chamber technology e Temperature range from 5°C above ambient temperature to 100°C Microprocessor controller with digital display and clock from 0 to 99 hrs 59 min. Digital temperature setting with an accuracy of 0.1°C Class 3.1 temperature protection with visual alarm Dolitdxsv I Uumj Nekl

Condition: new, Year of construction: 2021, Functionality: fully functional, No minimum price - guaranteed sale at the highest bid! Use: Machine for the production and packaging of moist wipes such as hygiene wipes, cleaning wipes, disinfectant wipes. Production process: Folding and cutting of the wipes, moistening with one or more different liquids, Packaging process: Packaging the wet wipe in a 3- or 4-side sealed bag. TECHNICAL DETAILS Control: SIEMENS PLC and touch monitor Bag sizes: L(50-145) x W(50-110) mm Suitable films: laminated composite films, heat-sealable Dslitdouigpyjx Nskl Suitable cloth material: dry nonwovens (airlaid, spunlaid) Maximum folds: 10 vertical, 4 horizontal Cloth size (unfolded): L(40-220) x W(30-240) mm Wet wipe grammage: 30-80 g/m² Roll diameter of non-woven fabric: max. 1,000 mm Roll diameter film: max. 350 mm Filling range liquid: 0-10 ml Accuracy: ± 0.5 ml Machine cycle rate in idle mode: 110 cycles/minute MACHINE DETAILS Power: 5 kW Voltage: 220V, single-phase Machine dimensions: 3,200 x 2,400 x 1,800 mm EQUIPMENT - Perforating tool - Dosing pump - Tear-notch tool - 2 character sets for cold and hot stamping (14 characters each) - Outfeed belt (1.2 m)

Condition: like new (used), Number: 30206550 Operating hours: 4,686 h Power: Internal dimensions: Dimensions: 1.300 x 900 x 1.450 mm Height with rack: 2,100 mm Dkslji Ra Tgoitdx Njl Weight:

Condition: like new (used), Volume 22 liters Good working condition. Please check out our other listings as well. Dkolitehwtv Sodx Nol

Year of construction: 2012, Condition: like new (used), Functionality: fully functional, Special opportunity! From stocks in the state of Rhineland-Palatinate, we can offer you these well-maintained CO2 incubators from the global brand "Heraeus" or "Thermo Electron" type HERAcell 150 in copper design. The HERAcell 150 is one of the most used and reliable devices in the sector, and is now an indispensable part of almost every laboratory worldwide. It has a completely copper interior with a water tank integrated directly into the work area, which makes working even easier, and three copper shelves. The devices were purchased by a biology institute at the university, but were hardly used, and mostly only switched on for testing purposes - all components including the shelves are in a technically and visually very well-maintained condition - see pictures. There is no damage or malfunctions, the devices can be put into operation immediately - however, for the sake of good order, we would like to point out that all regular tests in accordance with STK / MTK must be carried out again before commercial use! The greenish discoloration shown is due to the use of water in combination with copper during the functional tests and does not limit usability in any way. In addition to the device itself, three shelves, power cable and voltage converter from 120 to 230 volts are included, as the devices were originally ordered with a 120 volt power supply. The price is for one device with accessories as described. Technical data: Capacity (Anglo-American)5.3 cu. ft. Data Output RS232 Capacity (metric)150 L Delitdxovph Ens Nskl Chamber Material Copper CO2 Concentration Range0 to 20% CO2 Sensor TechnologyTC Sensor Lighting LED MaterialCopper O2 Concentration Range Optional 1 to 21% or 5 to 90% Oxygen Control Optional 1 to 21% or 5 to 90% Relative Humidity

Condition: ready for operation (used), Steris EPS Endoscope Processing System Dkolitdsvypuxex Njl Year of manufacture: 2010 S/N: 3611710001 You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Year of construction: 2020, Condition: as good as new (ex-display), Full automatic high speed machine for the production of 3-layer medical & protection masks (type I,II,IIR) with rectangular shape and elastic earloop in 1 size with dimensions 175mm length x 95mm width Productivity at the level of up to 800 pcs/min -Automatic splicer for all nonwovens including earloop - Ear cuffs made inline by lamination of nonwoven and Lycra - In-line nose clip manufacturing Dkolitji Dnmcsdx Nol - Automatic counting and stacking of manufactured masks - Automatic transfer of the stack to the packaging machine -Changing the rolls without stoping the machine Possibility to purchase also raw material for production and packaging machine (OPTIMA) Including 3 cranes for material change for all fabrics and nosewire Including rollable aluminium ladder for smooth operation Including approx 60k spare part stock Readily packed for overseas shipping Any additional information will be provide via email/phone

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, overall weight: 8,000 kg, total length: 9,040 mm, total width: 3,390 mm, total height: 3,690 mm, space requirement length: 11,040 mm, space requirement width: 3,390 mm, space requirement height: 4,000 mm, Equipment: documentation/manual, Transportable cleanroom container ABN Stericube, as good as new, suitable for outdoor installation, so far only indoor installation, serviced annually (last maintenance log: see documents). Optional cleanroom equipment available (cleanroom vacuum cleaner, work tables, shelves + cabinets). Features: * Cleanliness class: ISO 6 (in the cleanroom, one class below in personnel and material airlocks) * Filter: HEPA H14 * Max. volume flow: 2 x 1,250 m3/h * Air exchange rate: 10 - 60 ACH * Electrical connection: 380 V AC, 50 Hz, 3 Ph, 16 A * Sockets inside: 8 x 230 V AC, 50 Hz * Internal dimensions of clean room: 5 x 3.2 x 2.35 m * Temperature: 20 °C +/- 2 K * Humidity: not regulated Djlitdxjtvf Ahj Nskl