Used mounting technology for sale (164)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors Cedpfx Aszlx E Tol Ashc

Year of construction: 2014, operating hours: 4,000 h, condition: used, Operational machine with low hours! Chjdpoy R Dc Dsfx Al Asc Ask for additional information!

Condition: used, functionality: fully functional, Year of construction: 2010, total length: 3,590 mm, total width: 1,432 mm, total height: 1,478 mm, overall weight: 870 kg, We offer this ready-to-use Rehm VXS basic 2100 (Type 422) reflow oven for SMT/re-flow soldering, manufactured in 2010. Codpfoz Hnz Rjx Al Aohc - Manufactured in 02/2010, put into operation on April 16, 2010 - Special shortened version, 7 zones: 4x preheating, 2x PEAK, 1x cooling - Operated in a single-shift mode from 04/2010 to 07/2021 (approx. 11 years), has been out of operation since then - Regularly serviced and cleaned; only one service intervention during the entire operating period (repair of the transport trolley, 06/2016) - Dimensions: 3,590 × 1,432 × 1,478 mm (L × W × H, ±50 mm) - Purchased as new directly from Rehm (original purchase price approx. 1.43 million CZK) - Data sheet and operating records available for viewing/download - Inspection and collection: Bonnel Technologie s.r.o., Wolkerova 2304/38, Cheb, Czech Republic (near the Bavarian border) If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: good (used), functionality: fully functional, Year of construction: 2020, Asys VL01 Lifting Station Year of manufacture: 2020 Complete documentation Chjdpfx Alsz Ib Tcs Aec

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Chedjz Hxgdspfx Al Ajc Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), We are offering our Seho Powerwave N2 wave soldering machine for sale. The Powerwave N2 is a fully automatic nitrogen wave soldering machine for cost-effective electronics manufacturing. Chodpfxjz Il Nbo Al Aec Year of manufacture: 2015 Serial number: 15091295945 Special feature: In 2023, the machine was equipped with a "new" soldering module (lead-free). The machine has already been dismantled and is available immediately. Current location: in our factory in Romania (Satu Mare). If there is serious purchase interest, the machine can also be brought to Germany. A video of the machine in operation is available upon request.

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Chodpfx Asw Ty Hcol Aec Ask for specification!

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA Csdpjzwdx Nofx Al Ajhc MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects. Chodozhwvpepfx Al Ajc

Condition: excellent (used), For sale is our Viscom AOI S3088-III in very good condition. Viscom S3088-III Chodpfsz H Nl Rox Al Asc Year of manufacture: 11/2010 Serial number: 100967 Connection: 230/400V 3P/N/PE Frequency: 50-60 Hz Weight: 750 kg Operating system: Windows 10 Enterprise 2016 LTSB, 64-bit Processor: Intel Core i7-6700K, 4.00 GHz RAM: 32 GB Camera technology: 8M with color cameras and white LED lighting Sensor head: 4 cameras orthogonal (top view), 4 cameras lateral Software version: SI 9.70(11) Open eVision licenses: OCR and DMC Last calibration: 05.12.2025 Grayscale MFU from 03.12.2025: passed Geometric MFU from 03.12.2025: passed The system has been inspected and found to be in good working order. Functional video available. Inspection is welcome.

Condition: used, Year of construction: 1998, Operating voltage: 400V, frequency: 50Hz. The system is equipped with a conveying/through-feed system, several process sections, pump and piping systems, and a separate control cabinet. An on-site inspection is possible. Chsdpfx Alez Irmmj Aec

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 14-250 001, workpiece diameter (max.): 80 mm, Title: Short Bar Loading Magazine FMB SL 80 S – Year of Manufacture 2004 – including accessories & forklift loading Description: Due to a change in our production processes, we are selling our FMB SL 80 S short bar loading magazine. The machine has operated reliably in our production up until now and is no longer needed due to the changeover. •Manufacturer: FMB •Model: SL 80 S •Year of Manufacture: 2004 •Bar Diameter: 10 – 80 mm •Condition: Used Scope of Supply & Accessories: •Connection cable to the lathe (interface) is directly attached to the machine. •4 different sliding bars / feed bars for different material diameters are included. Loading & Logistics: •A forklift is available on site. •We will assist with loading onto your truck or the shipping company’s vehicle free of charge. Chodpfxjz Eh Unj Al Aec Terms of Sale: The sale is exclusively to commercial customers (B2B) and is subject to the exclusion of any warranty and liability for defects. A proper invoice with VAT will be issued.

Condition: excellent (used), Year of construction: 2011, We are offering for sale our Viscom AOI S3088 - III in very good condition. - Manufacturer: Viscom SE, Hanover - Type: S3088-III - Inventory No.: ZZ052495 - Year of manufacture: 03/2011 - Serial number: 101159 - Camera configuration: 8M (4x orthogonal, 4x angled) - Software version: 9.40 (4) - Licenses: OCR and DMC - Last calibration: May 2025 - Operating system: Windows 7 Professional (Service Pack 1) - Processor: Intel Core i7-3770 CPU / 3.40 GHz - RAM: 16 GB Csdpozv S Dwsfx Al Aehc - UPS functional The system has been inspected by our technician and found to be in very good condition. We will gladly provide you with a demonstration video of the system, or we look forward to your visit.

Condition: good (used), Year of construction: 2006, For sale is our Teradyne Spectrum 9. Type: TSE 8862 Year of manufacture: 2006 Condition: fully functional (without monitor and keyboard) Equipment: 1 FIB/DeltaScan board 1 VP board 1 VP Expander board 1 VXI-MXI-2 Chedpfszh Txtsx Al Aec 1 High voltage PRISM board 10 CC2a master and expander boards Maintenance documentation and CE declaration available.

Condition: good (used), Year of construction: 2014, Design: 2-chamber system Max. assembly size (batch): 550 × 540 × 80 mm Process medium filling volume: approx. 20 kg (does not contain Galden) Heating power, steam phase: max. 7.8 kW Average power consumption: approx. 3.1 kW Cooling water requirement: approx. 3 l/min Cedpfx Ajz Dxfbol Aehc Touchscreen operation Soft Vapor Temperature Control (SVTC) Intelligent Profiling System (IPS) Suitable for lead-free and lead-containing soldering processes Optional equipment: special RAL 7035 paint finish, multilevel mode, signal lamp, 2 measuring channels, measuring adapter. Integrated cooling unit

Condition: good (used), functionality: fully functional, Double wave Preheating Chsdpfx Asz Hw Tcsl Asc Spray fluxer 10 soldering frames

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), model B 348 = €10,900 + VAT 1 unit X 2 (year of manufacture 2006), model B 251 = €10,900 + VAT Both machines have been inspected and tested for full functionality in our workshop. All machines have a valid maintenance report. An on-site inspection is possible and desired. Please refer to the photos for the technical data and configuration of the respective machines. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. We can also carry out modifications for your specific application for an additional charge. The machines are sold without component tables or MTC. Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding Cedpfxoyrm E As Al Ajhc

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, FUJI NXT placement machine / pick and place machine Modules: 2 pcs. M6 II Base M4 Csdpfjz Hxbnjx Al Aehc Single lane Heads: 1x H12S / 1x H01 Including nozzle stations In very good condition. Inspection possible by appointment.

Condition: good (used), functionality: fully functional, For sale is a high-quality FELSOMAT FlexBox for automated workpiece handling in serial production. The system is designed for the automatic loading and unloading of CNC turning, milling, grinding, or gear cutting machines. It features servo-driven handling with a pneumatic gripper and an additional linear transfer axis, enabling the implementation of multiple processing stations or larger travel distances. The system comes from an industrial production environment and is ideally suited for special machine builders, automation specialists, or as a basis for retrofit projects. Equipment: FELSOMAT FlexBox Fully enclosed safety enclosure Automatic linear handling Servo-driven axes Pneumatic workpiece gripper Additional linear transfer axis Workpiece storage Control panel Safety monitoring Control cabinet integrated Extraction connection Completely wired Typical applications: CNC turning machines CNC machining centers Grinding machines Gear cutting machines Measuring stations Assembly automation Manufacturing cells Technical data (typical) Feature Specification Manufacturer FELSOMAT Model FlexBox Design Automation cell Axes Servo linear system Gripper pneumatic Workpiece handling automatic Voltage supply 400 V Safety cabin present Additional axis Linear transfer Scope of supply FELSOMAT FlexBox Servo handling Linear transfer axis Gripper system Chodpfx Alszivape Aec Control panel Control cabinet Safety cabin Condition The system is in good optical condition. The handling system, linear axis, and safety devices are all fully functional. The machine is being sold due to the closure of the operating facility. An inspection can be arranged at any time by appointment.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, STANDARD FEATURES - REJECT CONVEYOR • Reject, inspect, and by-pass modes selectable. • Conveyor width adjustment using a hand crank. • Controlled by a PLC. • CE certified. Chjdpfx Alozy N Rpj Aec OPTIONS • Non-standard conveyor/segment lengths • Electrical conveyor width adjustment. • Automatic conveyor width adjustment • Additional lift positions for extra buffer capacity • Inspection interval counter • Light fixture • Alarm buzzer. • Other options available upon request SPECIFICATION Transfer height 950 mm ± 25 mm* Colour RAL 9002* Flow direction Left to right* Fixed rail Front* Machine interface SMEMA* Conveyor concept ESD belt Belt speed Variable 2-14 m/min. PCB edge support 3 mm Component clearance Bottom 30 mm, top + bottom = 65 mm max. (belt to belt) Power supply 230 VAC/50 Hz/1 Ph Power consumption 150 VA max. Air supply 4-6 bar Air consumption 10 ltr/min max. Machine L x W x H (mm) 1000 x 875 x 980 Weight (Kg) 95 PCB Length (mm) 80 - 460* PCB Width (mm) 50 - 460* Fixed rail to front (A) (mm) 186

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, overall weight: 3,500 kg, Siemens SIPLACE HS50 – Spare Parts Machine / Untested Technical Data Manufacturer: Siemens SIPLACE Model: HS50 Heads included Cedpfxozyu N Do Al Ajhc Condition: Used, untested Functionality unknown Sold as a source of spare parts Several systems available We do not test or commission the system. It is sold in its current as-is condition, with unknown functionality. Inspection is possible by appointment. Packing and worldwide shipping are available as options.

Condition: used, Year of construction: 2018, Configuration: Single Track Multi Busbar, voltage: 380VAC 3P/N/PE/50Hz, power: 15kW, compressed air: 0.6MPa, machine dimensions X/Y/Z: approx. 7000mm/2050mm/2370mm. The stringer is currently retrofitted for TECC-Connect and can be converted back to the soldering process. The machine is fully functional and ready for operation. Documentation available. Inspection possible by arrangement. Chodpfx Aljz A Ei Re Aoc

Condition: used, Felsomat gantry robot loading unit with Siemens PLC Codpjz Hzygjfx Al Aohc Swivel-arm loader, 4-axle, table buffer, blow-off station, intermediate storage, s shuttle, Fritz Werner TC 2.5K Rail length 1,500mm. Upright height 2,300mm. With transfer unit.

Condition: used, functionality: fully functional, Year of construction: 2022, Used, but in good condition! Ready to be shipped. Chsdpez Dvb Hjfx Al Ajc

Condition: used, functionality: fully functional, Year of construction: 2010, 13,200 CPH with 4-nozzle laser head. Up to 200 feeders also available per request. Csdpfx Asz Hwl Eol Aehc