Used Soldering for sale (94)

Year of construction: 2024, condition: used, Make: AJAX TOCCO, Model: 23-13295, Year of manufacture: 2024, Serial no.: 23-13295, Connected load: 48 kVA, Converter output: 38 kW, Output frequency: 10,000 - 40,000 Hz, PLC system control with operator panel touch, 4 soldering stations, Cooling unit by Hyfra, type Sigma 18-S-RF-P, 2 extraction hoods, control/electrical cabinets, safety devices, 2 load carrier trolleys made from aluminum profile system, inspection table, mobile, 2,500 x 700 mm, 3 tiers, perforated metal wall, skylight, magnifier lamp, label printer by CAB, type EOS1, barcode scanner MDE by Zebra, type Omnii XT15 Ijdpfxsyx Etyj Apnsat

Condition: used, Year of construction: 2009, Offered here is a soldering robot from ATN Berlin. This is the "Vario" model. Component feeding is realized via exchangeable cassettes. The soldering process uses induction, making it a contactless soldering method. Iedpey Slkfefx Apnoat

Year of construction: 2009, condition: used, For sale is our welding system from AEF Hauzenberg. This is an electrode welding system. Inside the unit, there are three zones where welding processes can be carried out simultaneously. The system is equipped with a control cabinet featuring a PLC, allowing the process parameters of the welding operation to be set. We used Silfos (AG) brazing alloy. Included in the delivery is also a water chiller from Habor, model HWK-1000PTSB2. Iedpfey Skq Rsx Apnoat

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Dynamic preheating at the bottom Iaodpev Ta Hlofx Apnjt Convection heating

Year of construction: 2008, condition: good (used), Crucible filled with approx. 34 kg of lead-free tin. Original machine documentation and training materials. Condition: inspected, serviced, very good – on-site testing possible. Iaodpfey Auznex Apnet

Year of construction: 1970, condition: used, machine/vehicle number: 3566, Melting chamber dimensions Length: 240 mm Isdpfxob Nxf Ts Apnjat width: 200 mm Depth: 40 mm Solder capacity: 16 kg Power input: 2400 W for mains voltage: 220 V

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS Iedeyt Nlbjpfx Apneat - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit - Foldable convection top heater - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit - Transponder system for automatic switching of soldering programs - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Condition: used, Year of construction: 2014, Used equipment. Please ask for additional details. Iaedpfx Ajyzgpzepnjt

Year of construction: 2007, condition: ready for operation (used), A condensation soldering system Rehm is available. Process medium: Galden/perfluoropolyether, process chamber sealing: hermetic, profile control: injection principle, max. process temperature: approx. 240°C, filter: Galden filter, machine dimensions X/Y/Z: approx. 2200mm/1300mm/1650mm, weight: approx. 1250kg. Including various accessories and spare parts. Documentation available. An on-site inspection is possible. Iasdsyyb Tropfx Apnst

Year of construction: 2011, condition: used, Operational condition according to the factory. Isdpjyylpdofx Apnoat Ask for additional information!

Condition: ready for operation (used), machine/vehicle number: Sn96,5Ag3,0Cu0,5, functionality: unexamined, Felder Sn96.5Ag3.0Cu0.5 lead-free solder wire, 0.5 mm ! Sold only in lots of 10 pieces ! Manufacturer: Felder Iaedpfx Apjynhtasnot Model/Alloy: Sn96.5Ag3.0Cu0.5 Net weight: ~0.25 kg

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Ersa Hotflow 3/20 Year of manufacture: 04/2011 Refurbished in 2024 Dimensions: Iajdpfx Apsyf N Uyenot Length: 6,265 mm Width: 1,201 mm Height: 1,375 mm Weight approx. 1,900 kg Conveyor System: Working width: 45–516 mm, automatically and steplessly adjustable Clearance height: +35/-37 mm Center support, automatically and steplessly adjustable Conveyor speed: 20–200 cm/min Pin chain conveyor available with 3 / 4 / 5 mm pin length options Process Zone: Process length: 4,840 mm Heated length: 3,725 mm Cooling length: 1,115 mm Heating System: Up to 20 convection heating cassettes (Preheating zone up to 14 cassettes, reflow zone 6 cassettes) Airflow per module adjustable up to 500 m³/h Nominal power per module: 3.3 kW Nominal power last module: 4.5 kW Cooling: Up to 2-level cooling zone (ambient air) Electrical Data: 400 V, 3 phases, N, PE, 50/60 Hz Continuous operating power: approx. 12–16 kW Exhaust: Extraction capacity: Chimney at system inlet 300 m³/h; chimney at system outlet 400 m³/h, both with monitoring function

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Iasdoxp H Ttopfx Apnjt Including power cable.

Condition: good (used), Year of construction: 2008, Cooling tunnel in return transport Frame transport (frames not included) Isdpfxerdwl Ds Apneat Soldering width 330 mm

Condition: refurbished (used), Condition: refurbished, since then unused and professionally stored in case of the manufacturer Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm up to 4 kW mappings: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber connector: Trumpf B or type D (LLK Auto) Laser: CW laser up to 4 kW working range height (Z): ± 5 mm Robot adaptation: any Repaired/exchanged - Lens - pressure spring - protection spring - cover - Beam diaphragm Iasdpfx Aog Sfdljpnjt - Wave spring - Fiber coupling weft The unit was also cleaned, adjusted and force-normalized.

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Tool, spare parts box New timing belt, new impeller for drive installed Iaodpfexzrflox Apnet

Year of construction: 2020, condition: ready for operation (used), A Mechatronika reflow soldering oven with automatic conveyor with stainless steel mesh is available. Conveyor width: 260mm, max. PCB component height: 25mm, heating length: 900mm, max. temperature: 280°C, conveyor speed: 180mm/min. Machine dimensions X/Y/Z: approx. 1650mm/600mm/400mm, weight: approx. 80kg. Documentation available. On-site inspection is possible. Image is an example. Iajdpfex Hz R Dox Apnot

Year of construction: 2002, condition: ready for operation (used), A soldering system SMT with pin chain conveyor for the printed circuit board industry is available. Temperature: 300°C, heating time: approx. 30min, convection zone: 1660mm, cooling zone: 1030mm, process length: 2780mm, usable width range: 10mm-460mm, clearance height top/bottom: 30mm/30mm, max. speed: 1.8m/min, machine dimensions X/Y/Z: approx. 3300mm/1350mm/1550mm, weight: approx. 1100kg, operating hours (estimated): approx. 55000h. Documentation available. An on-site inspection is possible. Expected to be available from Q1 2026. Isdoxn Aatepfx Apnoat

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Iedpfxsud Svzj Apnjat

Year of construction: 1997, condition: ready for operation (used), A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible. Iaedsx Ecuxepfx Apnot

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t Iaedpfou Rwauox Apnot - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified Isdju Rnd Dspfx Apnoat On sale as is. *

Condition: like new (used), Year of construction: 2023, This is a 2 pot system. Machines where bought new in 2023 and project soon after ended. Additional specifications and pricing based on request! Iodpfxeyizzaj Apnjat

Year of construction: 2007, condition: good (used), For sale is our Parmi SPI HS 70 L solder paste inspection system in good condition. Serial no.: H7L15212F. The unit is currently located at our Hungarian facility in Vac, but can be transported to Germany at any time. We are happy to answer any questions you may have regarding the system. Iaodjyx Smaepfx Apnjt

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Iedpfen Htktjx Apnsat