Used mounting technology for sale (150)

Condition: used, 18ESE06D2, Cleco, Corded Inline Screwdriver with Torque Control Ijdpfx Ajt Ig Arjh Ueik Model: 18ESE06D2 Condition: Used

Year of construction: 2012, operating hours: 45,517 h, condition: used, Yamaha stencil printer Iisdpfeudk Dwjx Ah Usk

Year of construction: 2012, condition: used, Machine is in operational condition and recently taken from the operation. Isdpfx Ajxm S Htoh Uoik Machine is located in Estonia and is available to be shipped. Ask for additional information!

Condition: good (used), Year of construction: 2011, functionality: fully functional, The BF-Comet is equipped with Saki's unique line-scan camera image acquisition concept and vector analysis and can be used for all inspections (SMD, THT), both before and after soldering. Due to the very short cycle times, the operator practically never has to wait. This makes Saki technology ideal for benchtop use. The high-precision line-scan camera forms the central unit of the Saki image acquisition concept. During image acquisition, the circuit board is moved in one axis under the stationary optical system. The line-scan camera records line by line, with each line being recorded four times, alternating with the different light sources. After a few seconds, the image of the entire circuit board is available for inspection and programming. Variable and constant illumination methods are essential for reliable image analysis. Isdpfxswbgwre Ah Ueik The Saki system includes three central, variable units: coaxial (top), offset (side), and low (low) light sources. Thanks to the line scan concept, every component, regardless of its location on the circuit board, is always at the same distance and angle to the respective illumination. This results in evenly illuminated images for evaluation. The so-called top light unit is a 100% coaxial light source, which is introduced into the vertical camera view by a half-mirror. This creates a shadow-free image for 2D viewing. This is especially important for reliable solder joint inspection and inspections between tall components. The MLT illumination provides a clear, color-coded display between tinned/soldered and non-tinned surfaces. Surfaces without tin or with poor wetting are displayed in red tones and can thus be reliably detected using color recognition algorithms. Foreign objects such as "lost" components, solder balls, scratches, damage, etc. can be detected with Saki's ECD function with a little additional programming effort. Since the image of the entire circuit board is already available, this function only requires a few seconds of additional inspection time (computing time). Foreign Body Inspection - Automatic Library Creation. Saki's KPK function automatically creates a library for unrecognized/new components with a presence inspection tailored to the assembled components. - Automatic X/Y coordinate generation for THT solder joints. If the layout data (CAD) for the THT solder joints is missing, this function can be used to automatically generate a library using an unsoldered and a soldered circuit board. - Programming Wizard The software offers a wizard to guide the programmer through the entire programming process, from importing the CAD data, aligning the data, and assigning libraries.

Year of construction: 2019, condition: as good as new (ex-display), Magnetic palletizing system 820x820 Recording surface pneumatic steering More details on request, at best by telephone Iiedsff Hgdjpfx Ah Uek

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Iiedpfx Ahjwhvrre Uok Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: used, 48ESE36D3, Cleco, Corded Inline Screwdriver with Torque Control Model: 48ESE36D3 Condition: Used Iijdpfxot Ig D No Ah Uek

Year of construction: 2012, operating hours: 34,463 h, condition: used, Yamaha stencil printer Isdoudk Dkjpfx Ah Usik

Year of construction: 2015, condition: ready for operation (used), Good working condition 2D AOI system from Cyberoptics, model QX150i. Ijdpexm Sytefx Ah Ueik Comes with server and SW. For additional pictures and spec, please ask us.

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Model NPS510E Fully automatic in-line stencil printer with 2D paste inspection - Max. PCB size: 510x450mm - Max. stencil size: 736x736mm - Cycle time (without printing): 8 seconds - Alignment repeatability: 12.5µm at 3 Sigma - Squeegee pressure: 4-30kgf - User interface: Windows - Dimensions: WxDxH 1.20 x 1.40 x 1.50m; 900kg Included: - Stencil cleaning system, wet/dry/vacuum - CCD camera for 2D inspection of paste print and stencil - Automatic conveyor belt width adjustment Iiodpsvuprmofx Ah Ujk - Support block - Support pins - 2 metal squeegees

Year of construction: 2008, condition: used, Equipment for fitting assembly 1 FAA S3 for folding, opening and opening and folding fittings for wooden and PVC casements in automatic design, working procedure from left to right - automatic clamping and positioning sash - automatically travelling screwdriver with automatic screw feed, servo-driven, working in X and Y axis - preparatory assembly table fitted with slide rails, dimensions 1,300 x 3,000 mm, including ten automatically recessed wing stops, servo-driven travelling stop for hardware cutting with PC control - Grid rack for fittings - 33 compartments, including PC compartment - PC control, floppy drive, Windows NT Wing transport device 1 for automatic wing feed for the second screwdriving cycle Device 1 for automatic height adjustment of the travelling screwdriver via PC. Device for manipulation of scissor fittings 1 for closing and hooking open scissors Hand-held reading device 1 Automatic handing device/ 1 transfer of the forged wing to the next station ETHERNET network card 1 Number Machine name Pcs Item Automatically folding and feeding 1 table for removing the galvanised wing in horizontal position for subsequent transport and storage in vertical Iiedpfjw Tcu Nox Ah Usk position into the appropriate shelving rack, for sash dimensions with a width of 350 - 1.650 mm and a height of 350 - 2,500 mm, including cabinet switchboard and SPS control Servomotor landing gear 1 and servo controller for travel of the tilting table, sorting trolley, including drive unit, max. speed 65 m /min Rail tracks 7m made of thick-walled U-profiles for roller bogies with toothed shaft for running a tiltable table and sorting trolley Compartment rack (15 compartments) 3 with automatic wing insertion, compartment width 110 mm, compartment height drawer height 2.600 mm, depth of the shelf 1.100 mm, overall width of the rack 2.130 mm Display indicator 1 to display the relevant compartment shelf, including software equipment for sorting the leaves into appropriate compartments Protective fence 1 Entrance door for protective fence 1 with limit switch

Condition: new, NEW VARIOUS BEARINGS SET + PRESSURE GAUGES Iedpfx Ahjwq Rmie Ujik

Condition: used, Year of construction: 2008, Palletizing system EROWA EASY UPC 300 n° 10 PALLET 320 X 320 Iedpfxjwptbye Ah Uoik

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Iijdpjudk A Hjfx Ah Ujk

Condition: used, Year of construction: 2015, Operational machine - has been in use daily. Vacuum chamber has not been used for the past 1,5 years due to no need. Center support can only be adjusted manually. Machine location is EU. Iiodpfx Ahexlqnys Uek Ask for additional information!

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell Isdjfz Nb Tepfx Ah Usik The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Isdpfx Aheudk Amj Ueik

Year of construction: 2008, condition: used, Operational condition machine! Iiedpfxexlflgo Ah Usk - 4 axes - Component height up to 100 mm - 3 valves - 2 tilters for valve inclination - 2 tanks - External programming PC

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Isdpfxoudk Ago Ah Usik

Year of construction: 2014, condition: used, Machine in good operational condition and always serviced by the OEM (yearly maintenance). Has two high resolution cameras for the Midas head. The right line scan camera on the machine will sometimes will not start up but will do after a restart. Machine available end January 2026. Isdpsxfryqsfx Ah Uoik Magazines/Feeders also available - please look at the picture for the list.

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Iiedpjudkz Nefx Ah Ujk

Condition: used, Year of construction: 2016, Machine in good operational condition and always serviced by the OEM (yearly maintenance). Machine available end January 2026.  Iodpoxfrx Tofx Ah Usik Magazines/Feeders also available - please look at the picture for the list.

Condition: ready for operation (used), Year of construction: 2011, Working condition and comes with a PC. Iedpfx Ahexcvqbo Ueik

Year of construction: 2017, condition: ready for operation (used), Reflow oven in operational condition. Ask for additional information. Located within EU. Iijdpfx Ahsw Hfp Re Ujk

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Inline + Dispense Preparation including 6 CLM Feeders Iiedpfxew Ewfzo Ah Usk Operational machine!