Condition: ready for operation (used), Power consumption: 20kWh, compressed air supply: 6bar, connected load: 22kVA, with documentation. Dcob Hjl Ax Sxecpf Rog

Condition: good (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: HBJ-D800, total width: 1,300 mm, total length: 3,500 mm, total height: 1,600 mm, overall weight: 1,800 kg, We sell a folding and gluing machine (box forming machine) for ecological boxes made of solid cardboard. Working speed: 60-160 pcs/min Material weight: 200-600 gsm Material width: 100-600 mm Total power: 5 kW Weight: 1800 kg Dceb Hcpovy A A Aef Rog If you are interested, please contact me by e-mail.

Condition: ready for operation (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 1044595, Format range: max. 1050 mm / min. 50 mm Features: longitudinal seam, folded bottom, double edge, electronic top gluing unit, 4 channels with 2 application heads, bottom gluing unit on the left, vibrator at the feeder, right and left pre-breaker, kicker, counter, digital position indicators, Dsb Hcpfot Iggde Rjcg motorized threading station, additional middle transport in fold, blank monitoring, clocked pressing belt. Overhaul 2023: cleaned, checked, painted and equipped with new feeder and transport belts. All ball bearings renewed. Other: Machine can be viewed by arrangement

Condition: used, Straightening machine, strip straightener with adjusting gear motor LENZE straightening machine was used for cardboard approx. 350 x 1,5 mm not usable as classical straightening machine type 11.712.02.10 Output speed geared motor 12 to 72 rpm infinitely variable torque 80 to 40 Nm Straightening roll speed 19 to 115 rpm. Straightening roll width 520 mm Straightening roll diameter 90 mm Number of straightening rolls total 4 pieces Motor power 0,37 kW Mains connection 380 Volt, 50 Hz - Pair of pull rolls, drive of the lower rubberized roll via open gear drive - Speed by infinitely variable speed adjustment via handwheel on gear motor - Straightening rolls upper part mechanically adjustable - straightening unit with 3 rolls, one of the rolls is missing (rolls of the straightening unit not driven) - on stable metal base - straightening machine was used for cardboard approx. 350 x 1,5 mm Dcjb Hcpfsdzp U Aj Rjg space requirement L x W x H 630 x 460x 1060 mm weight approx. 160 kg good condition

Year of construction: 2012, Condition: good (used), - for foils, cork, veneer etc. - Rotary cross section - cutting width max. (mm): 2100 Deb Hcpfen Hxiis Rscg - heating: included - cooling: included

Year of construction: 2005, Condition: reconditioned (used), SCREW COMPACTORS Screw compactors are designed to dispose of large quantities of material. Even bulky materials can be compacted effectively. Steady rotation of the auger shaft draws the material to be compacted into the high-performance compactor. Compaction takes place in the adjacent container. Compared to piston presses, up to 60% higher content weights of the containers can be expected here. used functional machines Price from 3.300 € according to condition, VAT excluded. Dceb Hcsgypgajpf Rjg Delivery possible

Condition: ready for operation (used), With control cabinet and documentation, the machine was hardly used, in inspection is possible. Dcob Hcpfsnkcwwe Rsg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: ZV2021102001, L1000/2-A only can make the same box on the two lanes at the same time. Blank length 100mm-450mm Blank width 100mm-450mm Height of side flaps 15mm-260mm Height of side flaps+lid Deb Hcju Sqiropf Rocg 50mm-260mm Conicity 5°-40°

Condition: like new (used), Year of construction: 2015, Functionality: fully functional, thorn diameter: 76 mm, material width: 1,600 mm, Eruomac rewinder / slitter TB 6.10M Year of construction 2015 Unwinding Roll width 1600 mm Roll diameter 400 - 1200 mm Equipped with web edge control Rewind Roll width 1600 mm Roll diameter 350 - 1000 mm Dcsb Hcpfjtyxu Ee Rog

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Dsb Hodzqmzecpf Rscg Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Year of construction: 2003, Condition: ready for operation (used), Functionality: fully functional, The machine is currently in production and is being sold "as is." QTM completely overhauled the machine in 2013 and has been servicing it since then. • System with high-performance sheet feeder, equipped for manual non-stop operation • For fully automatic die-cutting, creasing, and embossing with or without a gripper edge • For stripping inner waste as well as the side and rear sheet edges • For stacking the die-cut and stripped sheets with the attached gripper edges or • For separating the gripper edges and subsequently stacking the remaining sheets • For blanking • With a patented gripper carriage register system for maximum registration accuracy • With a stack stacker that enables fully automatic separator sheet feeding and non-stop stacking and requires no conversion, even for the smallest blanks. (Shuttle table with comb structure) Djb Hcpev Ranqsf Rjcg • Separator sheet magazine with electronic stock control, refillable during production • With Centerline equipment • Including standard platform Processable materials Depending on material properties and sheet design: * Paper with a basis weight of at least 80 g/m² * Cardboard or solid board up to a basis weight of 2000 g/m² * Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) Performance data: Sheet format max. 740 x 1050 mm min. 350 x 400 mm Max. cutting force (300 t) 3.0 MN Machine speed max. 9000 cph Technical specifications Maximum die size 740 x 1060 mm Net cutting area 727 x 1050 mm Max. pallet size 820 x 1200 mm Gripper edge, adjustable from 11 - 17 mm (13 mm wood in front of the first knife) Cutting line height 23.8 mm Machine power 41 kW Feeder including pallet, max. height 2000 mm Max. weight 1200 kg Delivery including pallet, max. height 1700 mm Max. weight 1000 kg

Year of construction: 1965, Condition: ready for operation (used), Max. working width: 1200mm, clear span: 70-150mm, table dimensions: 1700x1400mm, working height: 850mm, roll diameter: 250mm, connected load: 2.2kW, weight: 800kg. Dcob Hcelc N Szjpf Rsg

Condition: excellent (used), Year of construction: 2021, Haining Chengda Machinery Co Ltd Shunda SMD-90 12 OZ Paper Cups Dceb Hcpfeignz Ho Rjg The machine has inpection unit to detect if the cups are sealed correctly and if they are clean. If it detects any problem, it removes the cup. The table which collects the cups is included. Real working speed of the machine is 90 - 100 cups/minute. SMD-90 is designed to make single coated paper cups for cold and hot drinking cups. The machine is in perfect working condition and can be seen in production anytime.

Year of construction: 2012, Condition: ready for operation (used), There are eight identical label dispense available, speed: 0-80m/min, output: 1000 label/ min, length: 700mm, width: 320mm, height: 500mm, including accessories. Dcjb Hcpfoflmc No Rsg

Condition: new, Year of construction: 2023, High speed Folder CartonFold Pro 1100 for 1,3,4 and 6 points High speed Folder CORRFOLD (Corrugated Folder Gluer) with 1700, 2100, 2800 mm, 1-3-4-6 points. Is a robust machine designed and built for folding cartons, E, F flute corrugated boxes final finishing. It can perfectly handle carton boxes with range from 250-800gsm, cardboard to cardboard laminated sheets, and E, F flute boxes. Its structure is for maximum speed of 450m/minute output with and easy operation as well. The whole machine consists of seven sections as standard configuration: Feeder, alignment section, pre-folding, lock-bottom, back, folding section, pressing and delivery section. Besides, it also has several optional function: As servo-driven quick-setup function Dcebeqzlkyo Hcpf Rsg Job recall function, remote control panel, remote online error diagnosis function CD boxes, speedwave structure for lock bottom boxes.

Year of construction: 1994, Condition: ready for operation (used), Format: 0.2/ 0.7/ 1l. Dsb Hcpjgquvijf Rjcg

Condition: ready for operation (used), Format: 320-640x320-860mm, weight: 7t. Dcsb Hcoht Hfiopf Rog

Year of construction: 2018, Condition: ready for operation (used), Paper tube length/ diameter: 1000-1600/ 20-160mm, connected load: 1.5kW, length: 4600mm, width: 1500mm, height: 1400mm, weight: 680kg, with instruction manual. Dceb Hcpoilqr Sef Rjg

Condition: ready for operation (used), Sheet format: 890x1180mm, inner frame width: 820x1120mm, pressing force: 300t, motor power: 4kW, length: 1800mm, width: 2100mm, weight: 4.3t. Dob Hcoht Hfmopf Rjcg

Year of construction: 2011, Condition: ready for operation (used), Connected load: 2kVA, length: 1200mm, width: 767mm, height: 1292mm, weight: 228kg, with two film rolls. Dceb Hcohvrpujpf Rsg

Year of construction: 1972, Condition: ready for operation (used), Format: 1000x700mm, an inspection is possible. Dcsb Hcsqzkdqepf Rsg

Year of construction: 2010, Condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Dcob Hcpfokkiwxs Rjg

Year of construction: 2007, Condition: ready for operation (used), Max. roll diameter: 1250mm, max. speed: 100m/min, weight: 2.9t. Deb Hcpef H Dlbef Rscg

Condition: ready for operation (used), Working width: 1320mm. Deb Hsip D Rwscpf Rjcg

Year of construction: 1994, Condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Dob Hceix Ahbspf Rjcg