Used Peddinghaus 210 13 for sale (136)

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Rodpfxjh Uhb So Ah Usck Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 See condition Rjdpev D Nzysfx Ah Ueck

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t Rcodpfecxxrpjx Ah Ujk stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade Rjdsi Duh Iopfx Ah Ueck - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, round bar steel 42 mm square edge steel 38 mm L-beam 110 x 10 mm cutting capacity 150 x 16 mm pressure 60 t hole punching press: throat 370 mm Rcodpswth N Hefx Ah Uek hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: ready for operation (used), PEDDINGHAUS FLAT, PROFILE AND BAR STEEL SHEAR WITH NOTCHER AND PUNCH TYPE: 210 AD/13 MACHINE NO.: GJ 3730 YEAR OF MANUFACTURE: 1970 Equipment: various punch tools and dies (see photo) standard accessories operating tools 2 foot switches for single/continuous stroke documentation Condition: workshop-tested, functional Rcjdpoxc Ep Tsfx Ah Ujk

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies Rcsdpecc Ubusfx Ah Usk -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Universal profile steel shear with punch station Peddinghaus Type 210 / 16 Year of manufacture: 1977 Press force: 60 t Punch: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90°: 130 x 13 mm L profile 45°: 100 x 11 mm T profile 90°: 130 x 15 mm T profile 45°: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Priced at €1,750 plus VAT ex location Rcedpfxjx Iclfo Ah Uok

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Model: 210/25s Rodewcqmaspfx Ah Ueck Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: used, functionality: fully functional, General Information Manufacturer: Peddinghaus Corporation Model: 210 Type: Hydraulic Ironworker Workstations: Punching, section shearing, flat bar shearing, notching, and round/square bar shearing. Capacity and Performance Punching Capacity: Approximately 55 - 60 tons (US tons). Punching: Typically, a 25 mm diameter hole in 16 mm thick steel. Angle Shear: 90-degree cut: Approx. 100 x 100 x 10 mm. 45-degree miter cut: Approx. 75 x 75 x 8 mm. Flat Bar Shear: Maximum thickness: Approx. 300 x 15 mm or 200 x 20 mm. Rsdpfx Asw Sy Eceh Usck Notcher: Plate: Approx. 10 mm. Angle: Approx. 75 x 75 x 8 mm. Round and Square Bar Shear: Round bar: Approx. 38 mm. Square bar: Approx. 32 mm. Other Information: Weight: Approx. 1700 - 2000 kg. Dimensions (L x W x H): Approx. 1500 x 800 x 1900 mm. Verify the accuracy of the information with the seller.

Condition: used, PEDDINGAUS Type: 210/20 Rcedpfxs Dv Nno Ah Ujk EXCELLENT CONDITION

Condition: used, Profile shear for steel with notching unit Ideal for construction sites as it is mobile; of course also suitable for indoor use Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen Rcodpfx Aow Ip D Heh Uek _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: used, Max. punching and shearing power: 400 kN Rodpfswfrc Iex Ah Usck Punches e.g. 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With a range of punches and dies as desired

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressure capacity 50 T - throat approx. 360 mm Rcedoit T Hyopfx Ah Usk - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm Rcjdjvh I T Nopfx Ah Uek L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: ready for operation (used), functionality: fully functional, Peddinghaus profile steel shears type 210 / 11 Technical details, see photos Rodpfjv H Ub Rsx Ah Ujck Accessories: all punching tools, see photo

Condition: good (used), functionality: fully functional, Year of construction: 1960, machine/vehicle number: G1 077, control type: manual, degree of automation: manual, actuation type: manual, controller manufacturer: peddinghaus, working width: 340 mm, cutting range flat at 90° (Y-axis): 120 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 45°: 55 mm, cutting range angle steel at 45° (Y-axis): 100 mm, sheet thickness (max.): 28 mm, working height: 800 mm, overall weight: 3,800 kg, total length: 1,000 mm, total width: 2,400 mm, total height: 2,400 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, electrical contact length stop, foot remote control, well-functioning machine with many tools Rcedpfxex H R Ras Ah Ujk

Condition: used, Punch holder, die holder, punching tool, punch, punching die, punching punch Rcedpfscwn Ezox Ah Usk -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Condition: excellent (used), functionality: fully functional, Peddinghaus hydraulic profile steel shear type Peddimax 1002 Technical data: - Flat steel shear - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shear - Angle and T-iron at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - with square notcher for sheets up to approx. 13 mm - Notch depth approx. 70 mm - Notch width approx. 52 mm - Punching station - Punching force approx. 100 t - Throat depth 510 mm - Stroke approx. 10 to 50 mm - Punches steel up to Ø 31 in 25 mm Rcodjx Rbihepfx Ah Ujk - Electrical contact length stop - Various: 10 punch dies + matrices - Drive 400 V / 5.5 kW - Space requirement W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used punching and shearing machine from Peddinghaus Model: Peddimaster 110/170 Punching capacity: 110 tons Rodpex Iicwsfx Ah Ujck Shearing capacity: 170 tons Includes side stop and various tools

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool Rcjdpfx Ahjx Nnnbo Usk -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

Condition: new, Standaard uitvoering Boren, plasmasnijden, zuurstofsnijden, markeren, verzinken, vlakfrezen, draadtappen, versteksnijden Boren 6 - 75 mm, aan maximum 2250 tr/min, 36 kW Siemens motor Plasma Hypertherm HPR 260 or HPR 400, tot maximum plaatdikte 82 mm Zuurstofsnijden van materiaal tussen 6 en 10 mm, breed gamma aan snijdgassen mogelijk Thermische snijdkoppen staan op extra gestuurde as voor versteksnijden Rollenbaanmeting voor precieze positionering materiaal Gereedschapswisselaar met 12 plaatsen in het magazijn Bijna-droog boren Klemkracht 11 ton Carbidemarkeren (krassen) Stempelmarkeren Technische specificaties Minimum plaatbreedte: 150 mm Maximum plaatbreedte: 1800 / 2500 / 3200 mm Minimum plaatdikte: 6 mm Maximum plaatdikte: 100 mm Plaatlengte: onbeperkt Extra dik boren voor platen dikker dan 40 mm Rodpfogca H Rox Ah Ujck

Condition: good (used), Year of construction: 2015, CNC Layout Marking on 4 sides. Rodpfova Hwkox Ah Ueck Roller feed measurement. Independent bottom torch. Siemens CNC Control.

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 350/340/H245 mm Rcsdpfx Ahsx Nng Do Uek -Weight: 58.5 kg

Condition: good (used), Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press -Stamp holder: with slotted punch tool, without die Rsdpfx Aox Idm Reh Uock -Socket: Ø 51 mm / Bolt circle Ø 110x18 mm see photos -Punch tool: Slotted hole 22.5x50 -Dimensions: Ø 135 x 180 mm -Weight: 6.7 kg