Used Paternoster / storage lift for sale (86)

Condition: good (used), Year of construction: 2000, 6th piece Cassettes with drawers for Storage Paternoster MEGAMAT year 2000 In good condition . Csbvbjubbqpeziajgt Outer dimensions : Length 2400 mm Width 530 mm Height 350 mm Dimensions drawer inside : length 1070 width 440 mm height 80 mm .

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, total height: 7,509 mm, total width: 9,380 mm, total length: 2,330 mm, load capacity per storage section: 300 kg, payload: 180,000 kg, type of input current: three-phase, input voltage: 400 V, table height: 890 mm, net weight: 16,371 kg, nominal voltage: 400 V, input frequency: 50 Hz, Equipment: safety light barrier, - Multi-Space consisting of 6 coupled lift units, 5 removal points at a height of 890 mm, one unit with maintenance flap - with 19-way optoelectronic identification system for filling material height measurement, when using containers with 37.5 mm intermediate grid, detection of filling material from a diameter of 5 mm, must not be transparent. Overhang control at the front and rear, provided that the overhanging stored goods interrupt one of the light barriers in the storage area - Energy-efficient, glare-free lighting of the removal points, LED technology with plexiglass cover - Equipment for emergency operation - Lean-Lift EcoDrive with integrated feedback unit - Keyboards on top of the universal arm, each mounted right below the lighting panel at all removal points - High-speed doors for removal opening - Container weighing device at the removal points - 899 storage profiles, storage notches every 75mm - Container load: 300kg with even load distribution - Device load: 12x15,000kg = 180 t - incl. 100 containers 1300x635x57mm, galvanized Cjbvov Hna Hjbziaegt - Microprocessor control MP 12N-H-TFT, host communication via TCP/IP, TFT color display 800x600 - USB connection for barcode reader, Ethernet 100Mbit connection - Safety light curtain at all outlets - Drive: 400V three-phase current, 50Hz, 5.0KW, 100% duty cycle, lift 18KW, horizontal drive 1/2/3 with 0.37/0.55/0.37KW, fuse 50 A slow-blow, supply line 5x10mm², separate protective conductor 2.5mm², for connection to TN network (L1/L2/L3/N/PE) according to IEC-60364-1

Condition: new, Year of construction: 2025, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow Cjbvbzeff Huwoiaogt • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: used, Year of construction: 1995, Functionality: fully functional, total height: 6,500 mm, total width: 12,260 mm, total length: 3,460 mm, payload: 6,690 kg, Small paternoster For sale is a paternoster storage system from Bellheimer Metallwerk GmbH, model SYS-250-4410.5-15 from 1995. Technical data: Manufacturer: Bellheimer Metallwerk GmbH Model: SYS-250-4410.5-15 Cgobvbzijvz Tm Ioast Year of manufacture: 1995 Dimensions (LxWxH): 3,460 x 12,260 x 6,500 mm Dimensions per compartment: Depth: 410 mm Height: 220 mm Width: 2,950 mm Number of compartments: 44 (can be expanded to 88 with a partition wall) Max. load per compartment: 150 kg (with 44 compartments) Max. load per compartment: 30 kg (with 88 compartments) Permissible total payload: 6,690 kg Price on request. Viewing and collection possible by arrangement. If you are interested or have any questions, just let us know!

Condition: good (used), Year of construction: 1990, Megamat carousel rack Type: 112-350-13 Device number: 7479 Year of manufacture: 1990 Device height: approx. 2950 mm Device width: approx. 2675 mm Device depth: approx. 1130 mm + 280 mm table top Number of shelves: 13 Shelf width: approx. 2160 mm Shelf depth: approx. 295 mm Cgsbvjv Ewn Dsbziast Shelf height: approx. 330 mm Shelf load: 100 kg Total load: 1,300 kg Color: beige

Condition: new, Functionality: fully functional, Equipment: safety light barrier, Replacement controller for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" control systems, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit storage systems of all manufacturers and types. Cgobvbeq Rcmteziajt The storage systems can remain fully loaded for the conversion. We can also provide special solutions as well as software connections.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, We inform, that we currently only sell or deliver to the D-A-CH and Be-Ne-Lux countries. We ask for your understanding Cgobvjq U Rvgsbziaet

Condition: good (used), 2 lift systems, Megamat, height 9.96m and 8.96m, 200kg/tray, 61 or 69 trays - used - : Price per device from location: €17,950 (net), dismantled, packed and loaded, plus transport and reassembly! Price per device when purchasing 2 devices: €16,950 (net), dismantled, packed and loaded, plus transport and reassembly! Device 1: Manufacturer: Megamat / Kardex Type: MEGALIFT-13236/25/9960 Year of manufacture 2000 Device height: 9.96m The device can be shortened in height! The "basic device" is approx. 6m high and could be set up at this height without much additional effort. Other heights also possible! Device width: will be provided later Device depth: will be provided later Shelf dimensions: outside approx. 225x65cm - inside approx. 225x51.5cm Number of shelves: 69 pieces Max. load (shelf): 205kg Permissible total load: 18,000kg The device has the standard equipment of the storage angle - distance approx. 250mm, i.e. the minimum distance between the shelves is 250mm, but taller products can also be stored. For an additional charge, additional storage angles can also be purchased to store additional shelves (which would then also have to be purchased). Device number: 050772 Device control / CPU (type) MM255 Keyboard / display (type) MM255 Control SW 25003_02_03D Total operating hours: approx. 2058 (as of test on March 20, 2024) Cgebovx Havsvbziast Total provision cycles 234700 (as of test on March 20, 2024) Date of last maintenance and safety inspection March 6, 2023 Date of last DGUV-V3 (protective conductor measurement / electrical inspection) March 6, 2023 Device 2: Manufacturer: Megamat / Kardex Type: MEGALIFT-13236/25/8960 Year of manufacture 2000 Device height: 8.96m The device can be shortened in height! The "basic device" is approx. 6m high and could be set up at this height without much additional effort. Other heights also possible! Device width: will be provided later Device depth: will be provided later Shelf dimensions: outside approx. 225x65cm - inside approx. 225x51.5cm Number of shelves: 61 pieces Max. load (shelf): 205kg Permissible total load: 18,000kg The device has the standard equipment of storage angles - distance approx. 250mm, i.e. the minimum distance between the shelves is 250mm, but higher products can also be stored. For an additional charge, additional storage brackets can also be purchased to store additional shelves (which would then also have to be purchased)., Device number: 050672 Device control / CPU (type) MM255 Keyboard / display (type) MM255 Control SW 04003_02_03D Total operating hours 1354 (as of inspection March 2024) Total provision cycles 170500 (as of inspection March 2024) Date of last maintenance and safety inspection 06/03/2023 Date of last DGUV-V3 (protective conductor measurement / electrical inspection) 06/03/2023 Condition: good, dent in the sheet metal of the control unit Available: immediately Location: Landshut

Condition: good (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 09105403, total height: 4,400 mm, total width: 4,400 mm, total length: 1,000 mm, load capacity per storage section: 200 kg, construction height: 4,400 mm, construction width: 4,400 mm, input voltage: 400 V, nominal voltage: 400 V, input frequency: 50 Hz, input current: 3 A, frequency: 50 Hz, roll width: 4,000 mm, power: 1 kW (1.36 HP), load capacity: 2,500 kg, Eska - TRPA Storage Paternoster (roll rack) Cgjbvbzisrwycvoaet The foil storage Paternoster foils is suitable to use for the storage of all types of films, it is used as a high storage at the membrane press or as a space-saving storage solution for the foils. With our Paternoster you can storage on very small area approximately 4400mm x 685mm a lot of film rolls (up to 21 rolls of a Ø 300 mm and a width fo 4000mm).

Condition: used, Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 5070000136, Large paternoster A Kasto Unitower F 3.0 heavy-duty paternoster from 2004 is for sale. Technical data: Manufacturer: Kasto Maschinenbau Model: Unitower F 3.0 Machine number: 5070000136 Year of manufacture: 2004 Max. payload of control unit: 3,000 kg Max. payload per cassette: 3,000 kg Cebevz Tkmjvbziaegt Number of compartments: 103 Price on request. Viewing possible by arrangement. If you are interested or have any further questions, please get in touch!

Condition: reconditioned (used), modernized machine with new LTG control system StoreControl L currently 6 identical machines available External dimensions: Height 4889 mm Width 2785 mm Depth 2810 mm Cgjbvbsd Sphioziaot Total machine load up to 2 x 15,000 kg 63 supports with central bar for up to 400 kg load each in the clear usable dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the operating opening at 875 mm above OKFF, then 875 mm high Engine performance Vertical drive 6 kW / 400 volts Horizontal drive 0.55 kW / 400 volts Color gray/blue Surface cleaned, signs of wear possible Basic machine for this modernization: lean lift 2460-825 from HAENEL subject to errors and technical changes or deviations in detail in photos Delivery and assembly currently mainly in Germany, Austria and several neighboring countries

Condition: good (used), Year of construction: 1993, Bridge paternoster / carousel / long goods paternoster for long goods up to approx. 6.60m, 700kg / gondola - second-hand - : Price location: 32.500.-€ (net), plus dismantling etc.! Csbvbzioq Tbmleasgt Manufacturer: Schultheis (CH) Type: IPN 11/TL Fab. no.: 93-03018/2 Year of construction: 1993 Payload per hanger: 700kg Total payload: 7,700kg Number of gondolas: 19 pcs. Connected load: 2x1.5kw, 3x380V Control voltage: 220v, 50 Hz One-sided pulling force: approx. 20% Device dimensions: L=6750mm, W=7750mm, H=4460mm Dimensions of the gondolas: L=550mm, W=6600mm, H=330mm The control system was renewed in 2001 and all documents are available. (Operating instructions and control instructions) TÜV and DGUV test reports are available. Load handling device, drive via roller chain with guide rollers for gondola transport Control: Main control point on the unloading side: electronic panel with dead man or automatic operation automatic operation Secondary control point at the rear: up, down, changeover switch Safety - one emergency stop switch at each of the four corners (to be acknowledged on the panel) Facilities: Two light barriers on each of the long sides (stop the system for the duration of the interruption) Defects: no inspection from 29.8.2023 Condition: good Available: immediately Location: 37445 Walkenried

Condition: reconditioned (used), total height: 7,510 mm, total width: 2,760 mm, total length: 2,650 mm, modernized machine with new control system LTG-StoreControl LL External dimensions: Height 7510 mm Width 2760 mm Depth 2650 mm 40 supports with 170 kg payload each in the clear usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine payload up to 2 x 9,000 kg Start of the operating opening at 900 mm above OKFF, then 750 mm high Color GRAY / GRAY, supports Sendzimir galvanized, Surfaces cleaned, signs of wear possible Cgjbvbsdpd Scsziaot Performance values: Vertical drive 1 x 3.0 kW / 400 volts Horizontal drive 1 x 0.37 kW / 400 volts subject to change Errors, technical changes, deviations in detail from the photos Delivery and assembly currently mainly in Germany, Austria and several neighboring countries Basic machine: MEGALIFT 14448-25/7510

Condition: reconditioned (used), Year of construction: 2003, currently 14 (of formerly 17) identical machines still available mechanically revised machine with new LTG StoreControl L control system External dimensions: Overall height 8,450 mm (customization possible at additional cost) Overall width 2,805 mm Overall depth 2,810 mm 50 carriers with 250 kg payload each in the clear usable dimensions: W = 2,450 mm D = 825 mm H from 55 to 750 mm Cgobvbon D A I Teziajt Total machine load up to 2 x 15,000 kg Start of operating opening at 890 mm above OKFF, then 875 mm high Colour CREAM WHITE / BLUE, support beams galvanized, surfaces cleaned, traces of use possible Performance values: Vertical drive 1 x 5 kW / 400 Volt Horizintal drive 1 x 0.55 kW / 400 Volt subject to errors, technical changes, deviations in detail from the photos Delivery and installation currently mainly in Germany, Austria and several neighboring countries Basic machine: LEANLIFT 2460-825

Condition: reconditioned (used), Year of construction: 1996, currently 2 identical machines still available mechanically revised machine with new LTG control system StoreControl L Cgjbvbsd Hxpveziaet External dimensions: Height 5,200 mm (adjustment possible for additional costs) Width 1,600 mm Depth 2,800 mm 38 supports with a payload of 250 kg each in the clear usable dimensions: W = 1,300 mm D = 825 mm H from 55 to 750 mm Total machine payload up to 2 x 10,000 kg Start of the operating opening at 875 mm above OKFF, then 875 mm high Color GRAY / BLUE, supports Sendzimier galvanized, surfaces cleaned, signs of wear possible Performance values: Vertical drive 1 x 3.5 kW / 400 volts Horizontal drive 1 x 0.75 kW / 400 volts Basic machine: LEANLIFT 1300-825 Subject to errors, technical changes, deviations in detail from the photos Delivery and assembly currently mainly in Germany, Austria and several neighboring countries

Condition: reconditioned (used), machine/vehicle number: 2018-001, Modernized machine with new LTG-StoreControl P control system External dimensions: Overall height 5750 mm Overall width 3350 mm Overall depth 1550 mm 26 carriers for 250 kg payload each in the clear usable dimensions: H = 335 mm W = 2650 mm D = 450 mm Chain jump 381 mm Storage table at 1000 mm height above OKFF - Worktop wood/rubber Color grey / blue, surfaces cleaned, traces of use possible Cgjbsdvlt Hsvbziaot Motor power drive 1 x 3.0 kW / 400 Volt Basic machine of this modernization: MEGAMAT 155 subject to errors, technical changes or deviations in detail in photos Delivery and installation currently mainly in Germany, Austria and several neighboring countries

Condition: reconditioned (used), Year of construction: 1990, Modernized machine with new LTG-StoreControl P control system only 1 paternoster available External dimensions: Overall height 5860 mm Overall width 2940 mm Overall depth 1180 mm 25 carriers with a load capacity of 165 kg each in the clear effective dimensions: H = 380 mm Cebvednzg Nebziaegt W = 2500 mm D = 410 mm Chain jump 412 mm Total payload up to 4110 kg Storage table 1000 mm above OKFF with rubberized worktop color GRAY / BROWN, surface cleaned, traces of use possible Motor power drive 1 x 1.8 kW / 400 Volt Basic machine of this modernization: SYS 180 from Kardex subject to errors, technical changes, detail deviations from the photos Delivery and assembly currently mainly in Germany, Austria and several neighboring countries

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 2 identical machines available External dimensions: Overall height 4340 mm Overall width 3270 mm Overall depth 1680 mm 26 carriers for 250 kg payload each in the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain jump 254 mm Intermediate shelves are available for 0 load-bearing floors, then 120 kg payload per working level Intermediate shelves can be manufactured on request Storage table 900 mm high above OKFF - worktop V2A steel cover Color grey / grey, Surface cleaned, traces of use and minor deformations possible Cgobvbsdnh R Hjziaot Motor power drive 2 x 1.5 kW / 400 Volt Basic machine of this modernization ROTOMAT 970-267 from HAENEL subject to errors, technical changes or detail deviations in the photos Photos of similar machine Assembly currently mainly in Germany, Austria and some neighboring countries

Condition: reconditioned (used), Year of construction: 2000, Modernized machine with new LTG StoreControl L control system Control extension optionally possible 6 identical machines available External dimensions: Overall height 6,900 mm Overall width 1,580 mm Overall depth 2,680 mm 80 carriers with 250 kg payload each in the clear effective dimensions: W = 1,250 mm T = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the operating opening at 860 mm above OKFF, then 1000 mm high Colouring grey / dark grey, galvanized beams Surface cleaned, traces of use and minor deformations possible Performance values Vertical drive 1 x 2.2 kW / 400 volts Horizintal drive 1 x 0.25 kW / 400 Volt Further extras: Manual lift door, Basic machines of this modernization: SHUTTLE NT 250 from KARDEX subject to errors, technical changes, deviations in details of the photos Pictures of identical machines Delivery and assembly currently mainly in Germany, Austria and several neighboring countries Cgsbervkq Eovbziast

Condition: reconditioned (used), Year of construction: 1996, Modernized machine with new LTG StoreControl L control system External dimensions: Overall height 10,000 mm Overall width 1,600 mm Overall depth 2,680 mm 45/90 carriers with 250 kg payload each in the clear effective dimensions: W = 1,250 mm T = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Cobvbziervkrfjaogt Start of the operating opening at 865 mm above OKFF, then 850 mm high Colouring GREY / BLUE, galvanized beams Surfaces cleaned, signs of use and minor deformations possible Performance values Vertical drive 1 x 2.2 kW / 400 Volt Horizintal drive 1 x 0.29 kW / 400 Volt Further extras: MANUAL lifting door Basic machines of this modernization: SHUTTLE NT 250 from KARDEX subject to errors, technical changes, detail deviations of the photos Pictures of similar machine Delivery and assembly currently mainly in Germany, Austria and several neighboring countries

Condition: reconditioned (used), Year of construction: 1999, 2 identical machines available modernized machines with new LTG control StoreControl L external dimensions: overall height 6.000 mm (in modular grid also lower mounted) construction width 1.2630 mm Overall depth 2,980 mm Csbven D A Rrsbziajgt 30 carriers with 500 kg load capacity each in the clear useful dimensions: W = 1,300 mm T = 863 mm H from 50 to 750 mm Total payload up to 40,000 kg Start of the service opening in 870 mm above OKFF, then 845 mm high color scheme GREY / BLUE, girder sendzimier galvanized surface cleaned, traces of use possible Performance values vertical drive 1 x 2,2 kW / 400 Volt Horizontal drive 1 x 0,29 kW / 400 Volt further extras: Lift door manually operated, basic machines of this modernization: SHUTTLE 500-1300-863 NT from KARDEX subject to errors, technical changes, detail deviations of the photos Delivery & assembly at present mainly in the D-A-CH region

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system External dimensions: Overall height 9,500 mm Overall width 2,200 mm Overall depth 2,700 mm 58 carriers with a load capacity of 190 kg each in the clear effective dimensions: W = 1,850 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Cjbvbodnlkhoziaegt Start of the operating opening at 900 mm above OKFF, then 850 mm high Colour GRAY / BLUE, galvanized beams Surfaces cleaned, signs of use possible Performance values Vertical drive 1 x 2.2 kW / 400 Volt Horizintal drive 1 x 0.25 kW / 400 Volt Further extras: MANUAL lifting door Basic machines of this modernization: SHUTTLE NT 250 from KARDEX subject to errors, technical changes, deviations in details of the photos Delivery and assembly currently mainly in Germany, Austria and several neighboring countries

Condition: reconditioned (used), Year of construction: 2000, Modernized machine with new LTG StoreControl L control system Control extension optionally possible 5 identical machines available External dimensions: Overall height 5,900 mm Overall width 1,580 mm Overall depth 2,680 mm 30 carriers with 250 kg load capacity each in the clear effective dimensions: W = 1,250 mm T = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the operating opening at 860 mm above OKFF, then 1000 mm high Colouring grey / dark grey, galvanized beams Surface cleaned, traces of use and minor deformations possible Performance values Vertical drive 1 x x.0 kW / 400 volts Horizintal drive 1 x 0.xx kW / 400 Volt Cgsbog Dckuovbziast Further extras: Manual lift door, Basic machines of this modernization: SHUTTLE NT 250 from KARDEX subject to errors, technical changes, deviations in details of the photos Delivery and assembly currently mainly in Germany, Austria and several neighboring countries

Condition: reconditioned (used), Year of construction: 1998, Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: overall height 6500 mm Construction width 3670 mm Overall depth 1560 mm 46 carriers with a load capacity of 305 kg each in the clear effective dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain jump 254 mm additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Storage table 1000 mm above OKFF with NiRo worktop Color GRAY / DARK GREY, surface cleaned, traces of use possible Cgjbvbzorw A Eijiaet Motor power drive 1 x 5.5 kW / 400 Volt Basic machine of this modernization: SYS 652 from Kardex subject to errors, technical changes, detail deviations from the photos Delivery and assembly currently mainly in Germany, Austria and several neighboring countries

Year of construction: 1995, Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system External dimensions: Overall height 5000 mm Construction width 2650 mm Overall depth 1250 mm plus 300 mm storage table 34 carriers with 140 kg load capacity each in the clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain jump 254 mm Storage table 1000 mm above OKFF with worktop in wood Cgobvbsdnfdleziast GRAY color, surfaces cleaned, traces of use possible Motor power drive 1 x 1.8 kW / 400 Volt subject to errors and technical changes Delivery and assembly currently mainly in Germany, Austria and several neighboring countries