Used paternosters & storage lifts for sale (102)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We inform, that we currently only sell or deliver to the D-A-CH and Be-Ne-Lux countries. We ask for your understanding Cedpfx Aeuriwgea Njpw

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden Csdpfx Aoff Huwoa Nepw

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Cjdsxr Ng Uepfx Aa Njpw Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: excellent (used), Year of construction: 2016, A 2016 Kardex Shuttle XP 500 2450x813 is now available for sale, in excellent condition. This machine has been used in a clean environment and has received annual maintenance from the manufacturer since its installation. The unit features trays that are 2,450 mm wide and 813 mm deep. With a total of approximately 49 trays, the vertical lift module provides 97.6 m² of storage while occupying only 8.12 m² of floor space. Built with robust construction and maintained annually by the manufacturer, the machine ensures long-lasting reliability. It is the perfect solution for efficiently handling large volumes of goods in a compact space. The vertical lift module will be available for installation starting February 2025. Shipping and installation costs are not included. Specifications: Manufacturer: Kardex Remstar Manufacturing Year: 2016 Model: SHUTTLE-XP-500-2450x813 Cpedpfjvx Rinsx Aa Nsw Height: 7,650 mm Width (vertical lift module / tray): 2,780 mm / 2,450 mm Depth (vertical lift module / tray): 2,921 mm / 813 mm Number of Trays: Approx. 49 Maximum Weight per Tray: 370 kg Electronics: 3/N/PE 400V, 17A

Condition: excellent (used), Year of construction: 2002, We now have two Kardex Shuttle XP 500 units from 2002 in good condition available. These Vertical Lift Modules (VLMs) are a great solution for saving space and improving storage efficiency. Each tray is 2650 mm wide and 864 mm deep, and can hold up to 485 kg. The system helps speed up picking times and boosts productivity by using automated handling and flexible tray setups. Cpjdjwl Inmjpfx Aa Nsw This is a reliable model, and we can provide both original servicing and spare parts in the future. Machine specifications: Manufacturer: Kardex Remstar Manufacturing year: 2002 Model: SHUTTLE-XP-500-2650x864 Height: 7,000 mm Width vertical lift module / tray: 2,980 mm / 2,650 mm Depth vertical lift module / tray: 3,074 mm / 864 mm Number of trays: Approx. 21 trays per lift Maximum weight per tray: 485 kg Electronics: 3/N/PE 400V, 3x17A

Condition: good (used), Year of construction: 1985, Megamat carousel Type: 130-225-42 Device no.: 4492 Year: 1985 Rack height: approx. 5410 mm Unit width: approx. 2670 mm Unit depth: approx. 1300 mm + 300 mm table top Number of shelves: 42 Shelf width: approx. 2155 mm Shelf depth: approx. 410 mm Shelf height: approx. 200 mm Csdpfx Aaevc Hk No Nopw Shelf load: 100 kg Total load: 4,200 kg Color: beige/green

Condition: good (used), Lifting system, Megamat, 170 kg / tray, approx. 6 m high, – used - : Price ex location: €14,500 (net), plus dismantling, etc. Manufacturer: Megamat Model: Megalift 14448/25/6010 Year of manufacture: 2000 Max. load capacity per tray: 170 kg Max. total load capacity: 18,000 kg Dimensions per tray: approx. 2.45 m x approx. 0.80 m Number of trays: approx. 40 units Machine dimensions: Height: approx. 6.01 m Width: 2.76 m Depth: approx. 2.70 m Cpedjyhxkmepfx Aa New 3/N/PE 230/400V 10A, fuse 16A Condition: good Availability: immediately Location: BG-8800 Sliven

Condition: excellent (used), Year of construction: 2012, One Modula Lift ML 50D for sale. The Vertical Lift Module has been regularly serviced by the manufacturer since it was installed and is in great condition. Codjv Uxrvopfx Aa Njpw The trays have a width of 4,100 mm and a depth of 860 mm, providing 3.53 m² of storage space per tray. With 50 trays, the total storage area is 176.5 m². Each tray can hold up to 500 kg, giving a total capacity of 25,000 kg for all 50 trays. The Vertical Lift Module is located in a protected area with a mezzanine, which has helped keep the cladding and exterior in excellent condition. Specifications: Manufacturer: Modula Year of Manufacture: 2012 Model: Modula Lift ML 50D Height: 6,200 mm Width (Vertical Lift Module / Tray): 4,500 mm / 4,100 mm Depth (Vertical Lift Module / Tray): 3.058 mm / 860 mm Number of Trays / Tray Height: About 50 trays / 120 mm high edge Maximum Weight per Tray: 500 kg Electronics: 400 V, 20 A

Condition: reconditioned (used), total length: 2,650 mm, total width: 2,760 mm, total height: 7,510 mm, Modernized machine with new LTG-StoreControl LL control system External dimensions: Height 7510 mm Width 2760 mm Depth 2650 mm 40 beams, each with a payload of 170 kg with clear usable dimensions: W = 2448 mm D = 816 mm Cpsdpfxjdpd Sco Aa Njw H from 50 to 720 mm Total machine load capacity up to 2 x 9,000 kg Start of the service opening 900 mm above the top floor, then 750 mm high Color: GRAY/GRAY, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur Performance values: Vertical drive 1 x 3.0 kW / 400 volts Horizontal drive 1 x 0.37 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Mechanically overhauled machine with new LTG StoreControl L control system External dimensions: Height 8,760 mm Width 2,778 mm Depth 2,800 mm 2 identical machines available 48 beams, each with a payload of 340 kg with the following clear usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 20,000 kg Start of the access opening 900 mm above the top floor, then 750 mm high Color scheme: GRAY/BLUE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur Performance values: Vertical drive 1 x 3.0 kW / 400 volts Horizontal drive 1 x 0.37 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently primarily in Germany, Austria, and several neighboring countries. Cpjdped Rh Dvofx Aa Njw

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system upgrade available 2 identical machines available External dimensions: Height 4730 mm Width 3270 mm Depth 1680 mm 29 supports, each with a payload of 250 kg In the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 support sets, allowing a payload of 160 kg per usable level. Intermediate shelves can be manufactured upon request. Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: Gray / Gray Surface cleaned, signs of wear may occur Drive motor power: 2 x 1.5 kW / 400 Volt Cpedpsdnhz Uofx Aa Nsw Subject to errors and technical changes or deviations in details in the photos. Delivery & installation currently mainly in Germany, Austria, and other neighboring countries.

Condition: good (used), Year of construction: 2002, Storage Carousel, Megamat, approx. 3.04m high, 350kg per tray – used - : Ex-works price: €9,950 (net), for self-dismantling! Cjdoxbhlnepfx Aa Nspw Manufacturer: Megamat Model: 1568/267/16 Year of manufacture: 2002 Serial number: 16178 Equipment height: 304 cm Equipment width: 388 cm Equipment depth: 205 cm Number of trays: 16 Intermediate shelves: approx. 16 pcs - If yes: Quantity: 64 - Removable? Yes Tray dimensions: Height: approx. 20 cm (approx. 10 cm with intermediate shelves) Width: 325 cm Depth: 60 cm Total load capacity: 5,600 kg Load per tray: 350 kg Imbalance: 1,000 kg Operation: with Kardex Drive and SAP integration Power supply: 3/N/PE 230/400V, 9A, main fuse 16A Condition: good Available: immediately Location: Herrenberg

Condition: excellent (used), Year of construction: 2019, We now have 13 SSI Schaefer SLL LogiMat Vertical Lift Modules from 2019 available for sale. These machines are in very good condition and have been serviced every year by the manufacturer since they were installed. Thanks to this regular maintenance and careful use, the machines are still very reliable. These Vertical Lift Modules are designed to provide maximum storage in a small space. Tray size: 4.025 mm wide × 815 mm deep Tray area: About 3.3 m² Number of trays per machine: Around 49 Total storage area per machine: About 160 m² Floor space used per machine: Only 14.12 m² Each machine includes an optional light pointer, which shows exactly where to pick items. This helps make order picking faster and safer. To use the light pointer, the machine must be connected to an ERP or WMS system. The machines have only run about 30,000 to 60,000 cycles each – about 1 to 2 years of normal use. The height of the machines is 8,200 mm, but they can be adjusted to fit your warehouse ceiling during installation. Specifications – SSI Schaefer LogiMat SLL Vertical Lift Module Manufacturer: SSI Schaefer Model: LogiMat SLL 4025-815-8200/400 Year of Manufacture: 2019 Csdpfxowi Iywo Aa Njpw Condition: Very good - serviced annually by the manufacturer Number of Units Available: 13 Height: 8,200 mm Width (Machine / Tray): 4.570 mm / 4.025 mm Depth (Machine / Tray): 3.092 mm / 815 mm Floor Space Used per Unit: 14.12 m² Number of Trays per Unit: Approx. 49

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, We now have 2 well-maintained Kardex Shuttle XP 1000 Vertical Lift Modules. These units are in excellent condition and have been regularly serviced to ensure they perform at their best. Each machine comes equipped with approximately 40 trays of varying load capacities. Specifically, 20 trays have a capacity of 535 kg each, while the other 20 trays can handle up to 950 kg. This flexibility allows for efficient storage and management of materials with different weights and volumes. Cpedpfx Aaouhvpmo New What sets these vertical lift modules apart is their slightly narrower outer width of 2,180 mm and tray width of 1,850 mm. Machines with these dimensions are rare in the second-hand market but are highly sought after due to their ability to fit into tighter spaces. Specifications: Height: 7 950 mm Width vertical lift module / tray: 2 180 mm / 1 850 mm Depth vertical lift module / tray: 3 100 mm / 864 mm Number of trays:Approx. 40 Maximum weight per tray: 535 kg - 950 kg Electronics: 3/N/PE 400V, 23A The machines is right now located in Denmark, Copenhagen and are avalible for delivery in December.

Year of construction: 2003, condition: good (used), Type: TLI 4500/2044 Device no.: 03502 Year:2003 unit height: approx. 4500 mm unit width: approx. 2000 mm unit depth: approx. 7010 mm Number of rolls: 44 Roll width: approx. 1680 mm shelf load: 150 kg Total load: 7000 kg superstructure see photo 3000 mm Csdpfx Aashyhlko Nopw Color: beige

Year of construction: 2003, condition: good (used), Type: TLI 4500/4300 Unit no.: 03501 Year: 2003 unit height: approx. 4560 mm Codpfxshyhlno Aa Nepw unit width: approx. 4280 mm unit depth: approx. 2330 mm Number of shelves: 5 Shelf width: approx. 3610 mm tray depth: approx. 710 mm shelf height: approx. 1060 mm shelf load: 200 kg total load: 1000 kg Color: beige

Condition: good (used), Year of construction: 1990, Kardex vertical carousel shelving Type: Kardex Device no.: not legible Year: 1990 Device height: approx. 5,920 mm Device width: approx. 3,010 mm Device depth: approx. 1,250 mm + 300 mm tabletop Number of trays: 40 Tray width: approx. 2,500 mm Tray depth: approx. 400 mm Tray height: approx. 235 mm Codpfx Aaow E Hh Ej Njpw Compartment load: 250 kg Total load: 10,000 kg Color: White

Year of construction: 2012, condition: good (used), Type: IND-PA Device no.: 0/1220744/1 Year: 2012 unit height: approx. 5600 mm unit width: approx. 2870 mm unit depth: approx. 4000 mm number of rolls: 45 Roll width: approx. 2370 mm shelf load: 200 kg Total load: 9000 kg Cpodpfx Ajhyhlgoa Njw Color: beige

Condition: new, Year of construction: 2022, functionality: fully functional, total height: 4,500 mm, total width: 2,780 mm, total length: 2,921 mm, load capacity per storage section: 500 kg, warranty duration: 12 months, load capacity: 66,000 kg, The fully automated high-bay warehouses with the latest technology – available from 2.5 to 15 meters in height, in 500 mm increments, available from stock! Measure your ceiling height, a 25 mm distance from the ceiling is sufficient for installing the storage tower. New device at special conditions, the alternative to used storage lifts (Kardex, Hänel, Modula, and Megamat) Take a look at our variety of products, We look forward to your inquiry Delivery possible within 48 hours after receipt of payment! Optionally with app integration! Cedpjuu Rzlefx Aa Nopw The densely packed storage in 25-millimeter steps creates the largest capacities in the smallest footprint.

Condition: new, We supply and install our own, new, digital PLC controllers suitable for warehouse lifts and paternosters from all major manufacturers on the market. Our LTG StoreControl LL (warehouse lifts) and LTG StoreControl P-Touch (paternoster) controllers thus offer replacements for controllers for which spare parts are no longer available. Our controllers easily connect your dynamic storage systems to higher-level warehouse management systems and implement access restrictions. Codeqlb Smspfx Aa Nspw

Condition: new, functionality: fully functional, Equipment: safety light barrier, Replacement controller for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" control systems, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit storage systems of all manufacturers and types. The storage systems can remain fully loaded for the conversion. We can also provide special solutions as well as software connections. Cpodpsq Rcmtsfx Aa Njw

Condition: new, The Cedes Safe C200 Can height detection, object protection, safety evaluation device assembly has been discontinued by the manufacturer and can therefore no longer be procured. Cjdpeiwc Rlofx Aa Nepw Therefore we already have developed a replacement control for these devices, which ensures continued overdoing for years. In this context, we provide spare parts, e.g. the Cedes Safe C200 Can is available for immediate repair by our technicians, on loan and free of charge, until the device control is replaced. This means that the vertical-lift can be used continuously and the control exchange can be planned. Of course we can repair and modernize any other dynamic storage systems as well. Do not hesitate to ask for an offer !!!

Condition: excellent (used), Year of construction: 2003, A Weland Compact Lift 2440 is now available for sale. The machine has been kept in a clean, well-maintained environment and receives annual servicing, making it reliable for many years to come. It has completed approximately 50,000 cycles so far. Typical usage is around 10,000 to 20,000 cycles per year, so this machine has seen light use. The lift is 6,000 mm high, but the height can be adjusted as needed. It is a Vertical Lift Module (VLM) that works well in warehouses with changing storage demands and can be shortened if required. The VLM is equipped with 25 trays, making it ideal for storing taller items. Additional trays are available from Relevator if needed. Manufacturer: Weland Solutions Year of Manufacture: 2003 Model: Weland Compact Lift 2440 Height: 6,000 mm (adjustable) Width: 2,950 mm (lift) / 2,440 mm (tray) Depth: 2,950 mm (lift) / 820 mm (tray) Number of Trays: Approx. 25 per lift Maximum Load per Tray: 400 kg Electrical: 400V, 25A Cpsdpfoxpuyuox Aa Njw

Condition: good (used), In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage brushing machines, and membrane on machineseeker! Paternoster For the membran press membrane press Cedpfobgdv Iex Aa Nspw FOILS-STORAGE-PATERNOSTER for the foil-roles stock and at the membrane press Technical Description: Height of the paternoster 3800mm Max. foil width 1600mm Max. foil diameter 500mm 12pcs bearing rods Size of the paternoster 1000x2370x3800mm Inclusive foil transporter (trolly) Drive capacity 1,5 kW Total upload 4080 kg at a max. rolls weight of 340 kg Tools weight incl. Up weight- 5240 kg Specific ground-load capacity (1,89 to/m²) Pod-inside-diameter max. 90mm, bearing rods diameter 42,4 mm Side panels - total all over the overall height Protection lattice from 2,2 metres over the floor to the over edge overall-height Load chain as a hollow-bolt chain Fraction strength 100 kN, division 50mm = bearing rods-hanger system raster Rotation speed ca. 5,5 m/min Control with a key-switch with return (TOTMANN) for switch on/off Nominal voltage 400 V; 3N; 50 Hz mains (net) connection-pipe with CEKON-plug 16A Mains (net) fuse (construction sided)- 10A inert NO Price on request

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Kardex Shuttle XP 500 4050x813, built in 2018, in very good condition. The unit has trays measuring 4,050 mm wide and 813 mm deep, with a total of 50 trays. External dimensions of the Kardex: Height: 6,450 mm Width: 4,380 mm Depth: 2,921 mm Cjdpfx Aaev Su Smo Nopw Tray dimensions: 4050 x 813 mm Load capacity per tray: 490 kg The machine has been disassembled and palletized.