Used paternoster / storage lift for sale (87)

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system upgrade available 2 identical machines available External dimensions: Height 4730 mm Width 3270 mm Depth 1680 mm Bwsdsdnhz Uepfx Aacow 29 supports, each with a payload of 250 kg In the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 support sets, allowing a payload of 160 kg per usable level. Intermediate shelves can be manufactured upon request. Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: Gray / Gray Surface cleaned, signs of wear may occur Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors and technical changes or deviations in details in the photos. Delivery & installation currently mainly in Germany, Austria, and other neighboring countries.

Condition: new, Year of construction: 2025, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. Bsdpfx Aasff Huwsceww With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: excellent (used), Year of construction: 2012, One Modula Lift ML 50D for sale. The Vertical Lift Module has been regularly serviced by the manufacturer since it was installed and is in great condition. The trays have a width of 4,100 mm and a depth of 860 mm, providing 3.53 m² of storage space per tray. With 50 trays, the total storage area is 176.5 m². Each tray can hold up to 500 kg, giving a total capacity of 25,000 kg for all 50 trays. The Vertical Lift Module is located in a protected area with a mezzanine, which has helped keep the cladding and exterior in excellent condition. Specifications: Manufacturer: Modula Year of Manufacture: 2012 Model: Modula Lift ML 50D Height: 6,200 mm Bodpfev Uxrvox Aacsww Width (Vertical Lift Module / Tray): 4,500 mm / 4,100 mm Depth (Vertical Lift Module / Tray): 3.058 mm / 860 mm Number of Trays / Tray Height: About 50 trays / 120 mm high edge Maximum Weight per Tray: 500 kg Electronics: 400 V, 20 A

Condition: used, Year of construction: 2016, operating hours: 59,000 h, functionality: fully functional, total height: 9,300 mm, total width: 3,380 mm, total length: 2,970 mm, load capacity per storage section: 455 kg, Equipment: documentation/manual, safety light barrier, Model: Kardex Shuttle XP 500 Quantity: 4 shuttles Dimensions, year of acquisition, and sale price excl. VAT (Shuttles): Shuttle 1: 3.38 x 2.97 x 6.85 m, 2014, €27,500 Shuttle 2: 3.38 x 2.97 x 6.85 m, 2014, €27,500 Shuttle 5: 3.38 x 2.97 x 9.00 m, 2016, €29,000 Shuttle 6: 3.38 x 2.97 x 9.30 m, 2016, €29,000 Dimensions, year of acquisition, and sale price excl. VAT (Put-to-light racks, abbreviated as PTL): Rack 1: 6.5 x 0.56 x 2.1 m, 2014, €8,000 Bwodew Tylxopfx Aacow Rack 2: 6.5 x 0.56 x 2.1 m, 2014, €8,000 Rack 3: 6.5 x 0.56 x 2.1 m, 2016, €8,000 Condition: as inspected (inspection possible) Delivery: ex works RWA ZL Knbg, dismantling to be organized and borne by the buyer Dismantling and installation: costs to be borne by the buyer Data sheets & service records: available Equipment included with Kardex Shuttle: - Shuttle 1: 60 trays, each 3.04 x 0.80 m, rated load capacity 455 kg per tray - Shuttle 2: 60 trays, each 3.04 x 0.80 m, rated load capacity 455 kg per tray - Shuttle 5: 60 trays, each 3.04 x 0.80 m, rated load capacity 455 kg per tray - Shuttle 6: 57 trays, each 3.04 x 0.80 m, rated load capacity 455 kg per tray - Trays are individually adjustable (depending on goods height, shuttle height, and minimum safety clearance of 5 cm) - Automatic lift door - Personal protection grating - Pick-by-light system using laser pointer (precise position indicator on the tray) - Display panel on the front edge (e.g., item description, article number, pick quantity) (displays on Shuttle 1, 2, 4, and 5 are no longer functional – intentionally not replaced) - Confirmation bar below the entire display panel - Software license: Power Pick Global by Kardex (customization possible but not included in the price) - Tray rack (for service and loading) Equipment included with put-to-light racks: - 100 displays per side (double-sided), manufactured by KBS - Six color display options (green, red, pink, yellow, light blue, dark blue) - Approx. 300 plastic bins (external dimensions: L 40 cm, W 30 cm, H 22 cm; internal dimensions: L 37 cm, W 27 cm, H 21 cm)

Year of construction: 2012, condition: good (used), Type: IND-PA Device no.: 0/1220744/1 Year: 2012 unit height: approx. 5600 mm unit width: approx. 2870 mm Bodohyhlgspfx Aacoww unit depth: approx. 4000 mm number of rolls: 45 Roll width: approx. 2370 mm shelf load: 200 kg Total load: 9000 kg Color: beige

Condition: reconditioned (used), total length: 2,650 mm, total width: 2,760 mm, total height: 7,510 mm, Modernized machine with new LTG-StoreControl LL control system External dimensions: Height 7510 mm Width 2760 mm Depth 2650 mm 40 beams, each with a payload of 170 kg with clear usable dimensions: W = 2448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 9,000 kg Start of the service opening 900 mm above the top floor, then 750 mm high Color: GRAY/GRAY, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur Performance values: Vertical drive 1 x 3.0 kW / 400 volts Horizontal drive 1 x 0.37 kW / 400 Volt Bwodpsdpd Scjfx Aacew Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: excellent (used), Year of construction: 2013, We are offering four well-maintained Kardex Shuttle XP 250 Vertical Lift Modules for sale. Manufactured in 2013, these units are in excellent condition and provide a highly efficient solution for warehouse storage and inventory management. Each unit features 70 trays, with tray dimensions of 3,050 mm in width and 813 mm in depth. This gives each machine a total storage capacity of 173 m², while taking up only 9.87 m² of floor space. When purchased together, the four units offer a combined storage capacity of 692 m², using just 39.48 m² of floor space. The machines come equipped with useful features such as a light pointer and confirmation buttons. The light pointer shows the exact location of the item to be picked, and the confirmation buttons allow for quick and accurate picking. Please note that integration with an ERP or WMS system is required to use the light pointer functionality. Availability: August 2025 Note: Shipping and installation are not included in the price. Specifications: Manufacturer: Kardex Remstar Manufacturing year: 2013 Bwjdswbg Anjpfx Aacjw Model: SHUTTLE-XP-250-3050x813 Height: 9,450 mm Width vertical lift module / tray: 3,380 mm / 3,050 mm Depth vertical lift module / tray: 2,921 mm / 813 mm Number of trays: Approx. 70 per lift Maximum weight per tray: 210 kg Electronics: 3/N/PE 400V, 17A

Condition: good (used), Year of construction: 2003, Kardex carousel Type: SYS-120-1414 Device no.: 03001086/001 Year of manufacture: 2003 Rack height: approx. 3110 mm Unit width: approx. 2950 mm Unit depth: approx. 1150 mm + 300 mm table top Number of shelves: 14 with 7 additional drawers Shelf width: approx. 2630 mm Shelf depth: approx. 320 mm Shelf height: approx. 330 mm Shelf load: 100 kg Total load: 1400 kg Bwodpfx Aoq I R D Nsacsw Color: white

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 5750 mm Width 3350 mm Depth 1550 mm 26 supports for a payload of 250 kg each In the clear usable dimensions: H = 335 mm W = 2650 mm D = 450 mm Chain jump 381 mm Storage table at a height of 1000 mm above the top of the machine - wood/rubber worktop Color: gray/blue Surfaces cleaned, signs of wear possible Motor power: 1 x 3.0 kW / 400 volts Bedpfx Aedvlt Heacoww Subject to errors, technical changes, or deviations from details in photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: excellent (used), Year of construction: 2019, We now have 13 SSI Schaefer SLL LogiMat Vertical Lift Modules from 2019 available for sale. These machines are in very good condition and have been serviced every year by the manufacturer since they were installed. Thanks to this regular maintenance and careful use, the machines are still very reliable. These Vertical Lift Modules are designed to provide maximum storage in a small space. Tray size: 4.025 mm wide × 815 mm deep Tray area: About 3.3 m² Bwsdpfjwi Iywox Aacjw Number of trays per machine: Around 49 Total storage area per machine: About 160 m² Floor space used per machine: Only 14.12 m² Each machine includes an optional light pointer, which shows exactly where to pick items. This helps make order picking faster and safer. To use the light pointer, the machine must be connected to an ERP or WMS system. The machines have only run about 30,000 to 60,000 cycles each – about 1 to 2 years of normal use. The height of the machines is 8,200 mm, but they can be adjusted to fit your warehouse ceiling during installation. Specifications – SSI Schaefer LogiMat SLL Vertical Lift Module Manufacturer: SSI Schaefer Model: LogiMat SLL 4025-815-8200/400 Year of Manufacture: 2019 Condition: Very good - serviced annually by the manufacturer Number of Units Available: 13 Height: 8,200 mm Width (Machine / Tray): 4.570 mm / 4.025 mm Depth (Machine / Tray): 3.092 mm / 815 mm Floor Space Used per Unit: 14.12 m² Number of Trays per Unit: Approx. 49

Year of construction: 2003, condition: good (used), Type: TLI 4500/4300 Unit no.: 03501 Year: 2003 unit height: approx. 4560 mm unit width: approx. 4280 mm unit depth: approx. 2330 mm Number of shelves: 5 Shelf width: approx. 3610 mm tray depth: approx. 710 mm shelf height: approx. 1060 mm shelf load: 200 kg total load: 1000 kg Bwjdpfx Ajhyhlneacow Color: beige

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Bjdednfdlepfx Aacoww Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: excellent (used), Year of construction: 2019, For sale: 14 Kardex Megamat RS 350 vertical carousels in excellent condition. These machines have been meticulously maintained with annual servicing and have been used exclusively in a clean and light-duty environment. They are available for individual purchase or in packages of 2, 4, 6, 8, or all 14 units. The collection includes 6 units manufactured in 2018 and 8 units from 2019, offered in two height options: 6,585 mm and 7,110 mm. Each vertical carousel is configured with either 21 or 23 carriers, providing between 42 and 49 shelves per unit. A detailed description of the shelf configurations can be provided upon request. All units feature the optional "Matrix Strip," an LED guidance system installed at the access point. This system highlights the picking location laterally and displays product information, though ERP or WMS integration is required to fully utilize its capabilities. Please note that the boxes shown in images are not included. Specifications: Manufacturer: Kardex Remstar Model: MEG RS 350.1.3050.6.533.21 / MEG RS 350.1.3050.6.533.23 Bwedpfx Ajvgdkbsacjw Manufacturing Year: 6 units from 2018, 8 units from 2019 Height (Vertical Carousel / Carrier): 6,585 mm & 7,110 mm with a free storage height of approximately 470 mm Width (Vertical Carousel / Carrier): 3,675 mm / 3,050 mm Depth (Vertical Carousel / Carrier): 1,671 mm / 628 mm Number of Carriers / Shelves: 21 or 23 carriers with 42-49 shelves Maximum Weight per tray: 228-350 kg, depending on the number of shelves installed Electronics: 3/N/PE 400V For further details or inquiries, please don't hesitate to get in touch.

Year of construction: 2003, condition: good (used), Type: TLI 4500/2044 Device no.: 03502 Year:2003 unit height: approx. 4500 mm unit width: approx. 2000 mm unit depth: approx. 7010 mm Number of rolls: 44 Roll width: approx. 1680 mm shelf load: 150 kg Total load: 7000 kg Bedpfx Aajhyhlkecjww superstructure see photo 3000 mm Color: beige

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: Height 6500 mm Width 3670 mm Depth 1560 mm 46 supports with a payload of 305 kg each In the clear usable dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain pitch 254 mm Bsdsrw A Eiopfx Aaceww Additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: good (used), Year of construction: 1990, Megamat carousel rack Type: 112-350-13 Device number: 7479 Bwedpfjv Ewn Dox Aacew Year of manufacture: 1990 Device height: approx. 2950 mm Device width: approx. 2675 mm Device depth: approx. 1130 mm + 280 mm table top Number of shelves: 13 Shelf width: approx. 2160 mm Shelf depth: approx. 295 mm Shelf height: approx. 330 mm Shelf load: 100 kg Total load: 1,300 kg Color: beige

Condition: reconditioned (used), Mechanically overhauled machine with new LTG StoreControl L control system External dimensions: Height 8,760 mm Width 2,778 mm Depth 2,800 mm 2 identical machines available Bwedped Rh Dvofx Aacjw 48 beams, each with a payload of 340 kg with the following clear usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 20,000 kg Start of the access opening 900 mm above the top floor, then 750 mm high Color scheme: GRAY/BLUE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur Performance values: Vertical drive 1 x 3.0 kW / 400 volts Horizontal drive 1 x 0.37 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently primarily in Germany, Austria, and several neighboring countries.

Condition: good (used), Year of construction: 1985, Megamat carousel Type: 130-225-42 Device no.: 4492 Year: 1985 Bwsdevc Hk Njpfx Aacew Rack height: approx. 5410 mm Unit width: approx. 2670 mm Unit depth: approx. 1300 mm + 300 mm table top Number of shelves: 42 Shelf width: approx. 2155 mm Shelf depth: approx. 410 mm Shelf height: approx. 200 mm Shelf load: 100 kg Total load: 4,200 kg Color: beige/green

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system Currently 6 identical machines available External dimensions: Height 4889 mm Width 2785 mm Depth 2810 mm Total machine load capacity up to 2 x 15,000 kg 63 beams with center bar for up to 400 kg load each In the clear usable dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the service opening 875 mm above the top floor, then 875 mm high Motor ratings Vertical drive 6 kW / 400 volts Bwsdpfx Aaod Sphiscjw Horizontal drive 0.55 kW / 400 volts Color: gray/blue Surface cleaned, signs of wear possible Subject to change Errors and technical changes or deviations in details in photos, delivery, and assembly currently mainly in Germany, Austria, and several neighboring countries

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 5860 mm Width 2940 mm Depth 1180 mm 25 carriers with a payload of 165 kg each with clear usable dimensions: H = 380 mm W = 2500 mm D = 410 mm Chain pitch 412 mm Total payload up to 4110 kg Storage table at 1000 mm above the top floor with rubberized worktop Color: GRAY/BROWN, surface cleaned, signs of wear possible Drive motor power: 1 x 1.8 kW / 400 volts Base machine for this modernization: SYS 180 from Kardex Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany and Austria and several neighboring countries Bjdpsdnzg Nefx Aacsww

Condition: reconditioned (used), Mechanically overhauled machine with new LTG-StoreControl L control system 2 identical machines available External dimensions: Height 5,450 mm Width 3,380 mm Depth 2,920 mm 60 beams with a payload of 210 kg each with clear usable dimensions: W = 3,050 mm D = 813 mm H from 45 to 750 mm Total machine load capacity up to 2 x 33,650 kg Start of the service opening 900 mm above the top floor, then 800 mm high Bwedpfx Aajn D A N Hscow Color: GRAY/BLUE, beams sendzimier-galvanized, surfaces cleaned, signs of wear possible Performance values: Vertical drive 1 x 4 kW / 400 volts Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm 25 carriers with a payload of 628 kg each In the clear usable dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Storage table at 1,000 mm above floor level with worktop / plastic surface Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Bjdpehfxkaofx Aacoww Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm Bwjdpfxsd Spf Rj Aacsw D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: reconditioned (used), machine/vehicle number: 2022-015, Mechanically overhauled machine with new LTG-StoreControl L control system Control system upgrade available as an option External dimensions: Height 6,210 mm Width 2,780 mm Depth 2,908 mm 50 beams with a payload of 331 kg each with clear usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 35,000 kg Start of the access opening 900 mm above the top floor, then 750 mm high Bwodpfx Aasd Rh Dwecew Color: GRAY/ORANGE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear and minor deformations possible Performance data: Vertical drive 1 x 5.2 kW / 400 volts Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Currently, 13 (formerly 17) identical machines are still available. Mechanically refurbished machine with new LTG control system StoreControl L. External dimensions: - Height: 8,450 mm (modification possible at extra cost) - Width: 2,805 mm - Depth: 2,810 mm 50 carriers, each with a load capacity of 250 kg Clear usable dimensions: - Width: 2,450 mm - Depth: 825 mm - Height: from 55 to 750 mm Total load capacity per machine up to 2 x 15,000 kg Operation opening begins at 890 mm above FFL (finished floor level), with a height of 875 mm Colour: cream white / blue, carriers sendzimir galvanized, Bwjdpfx Aen D A I Teacow surfaces cleaned, traces of use possible Performance data: - Vertical drive: 1 x 5 kW / 400 Volt - Horizontal drive: 1 x 0.55 kW / 400 Volt Optional transport trolleys available Subject to errors, technical modifications, and variations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.