Used Powder equipment for sale (76)

Condition: good (used), See pictures Dksb E Rqsv T S Tds Syjl

Condition: new, Year of construction: 2025, Functionality: fully functional, workpiece weight (max.): 250 kg, Manual powder coating system, suitable for gas cylinder coating Deb E Rqowhbvpo Syjkl

Condition: good (used), Year of construction: 2006, EISENMANN powder coating line, WAGNER booths Maximum workpiece weight: L x W x H 5,000 x 400 x 3,000 mm Maximum hanger weight: aluminum: 700 kg, maximum steel weight: 1,000 kg Djb E Rq Sewhwfyoyskl 11-zone pretreatment 2 automatic booths with 2 lifting devices and 24 spray guns 2 manual booths for pre- and post-coating

Condition: new, Year of construction: 2025, Functionality: fully functional, workpiece weight (max.): 700 kg, workpiece width (max.): 2,000 mm, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, Complete system with chemical pretreatment (7 zones) for GSB certification (QUALICOAT) (multi-metal capable) All dimensions and other changes can be taken into account in the design and planning. The offer includes the following components Cabin for pretreatment including reverse osmosis system Walk-in coating cabin Powder gun Powder firing oven Dryer Manual conveyor system Lifting and lowering station Electrical control Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum The cleaning cabin is designed for automatic cleaning. Spraying can be done with medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cabin Length 6,500 mm Width 3,000 mm Height 3,600 mm 2 Dimensions of the complete pre-treatment Length 6,600 mm Width 4,640 mm Height 4,300 mm 1. Process degreasing/neutral pickling Heated basin, 50-55°C, time = 3-6 minutes, dripping time = 80 seconds 2. Process acid mineral pickling Heated basin, 50-55°C, time = 3-6 minutes, dripping time = 80 seconds 3. Process rinsing 1 In this chamber, rinsing takes place at ambient temperature, time = 0.75-1.5 minutes, dripping time = 1 minute 4. Process rinsing 2 In this chamber, rinsing takes place at ambient temperature, time = 0.75-1.5 minutes, dripping time = 45 seconds. 5. Rinsing process 3 in this chamber, rinsing takes place at ambient temperature, time = 0.75-1.5 minutes, dripping time = 45 seconds 6. Nano-ceramic process in this process, rinsing takes place at ambient temperature, time = 0.75-1.5 minutes, dripping time = 60 seconds 7. Ceiling spray ring process for rinsing after process 6 Dkjbeffv Tpj E Rq Syjl in this process, rinsing takes place at ambient temperature, time = 1 minute, dripping time = 60 seconds 8. Passivation process, no-rinse for aluminum in this chamber, rinsing takes place at ambient temperature, time = 2-3 minutes, dripping time = 1-2 minutes 1.1. Reverse osmosis system Reverse osmosis system 250 liters / hour 1.2 Oil skimmer Tank No. 1 is equipped with an oil skimmer "UniSkim-21-100". Structure: The spray system is 2-part and movable and is moved up to 500 mm via a pneumatic sliding system. The feed back to the tanks is also movable via a pneumatic sliding system with 7 positions with the task of serving the 7 tanks. 2. Walk-in coating booth 1 Dimensions of booth Length 7,400 mm Width 4,000 mm Height 3,236 mm 2 Dimensions of booth including suction Length 8,552 mm Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for the inlet/outlet of the workpieces, and an additional side door for the coater. 3. Wagner powder coating system, manual system “Sprint 2 B” 4. Powder curing oven 1 Internal length 6,500 mm 2 Internal width 2,200 mm 3 Internal height 3,416 mm 5. Dryer 1 Internal length 6,500 mm 2 Internal width 1,200 mm 3 Internal height 3,416 mm 6. Manual conveyor system The conveyor system consists of: The conveyor system is designed for a traverse weight of 700 kg, the carriage carries a maximum of 2,000 kg on 3 rails.

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension width: 1,505 mm, inner dimension length: 2,500 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! Dksb E Rqowfgbrs Syel ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. Dkjbewf Dpgs E Rq Syol It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: good (used), Year of construction: 2022, Functionality: fully functional, See pictures Dkeb E Rov T S S Hsq Syjl

Condition: new, Year of construction: 2025, Powder coating booths, sizes defined by customer, Additional equippment possible. Dkeboizw Hys E Rq Syjl

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat glass and laminating line for flat glass or other materials Glass size max.: Length 3600mm x width 2600mm. 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Glass Lift Pos. 2 Vertical Inlet Transport WM Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with glass Activation Section Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Dob E Rq Sstwn Ipsyekl Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Pos. 15 Vertical Inspection station Pos. 16 Unloading Station with Glass Lift Pos. 17 Electrical Distribution Pos. 18 Demi-water plant for the supply of the glass washing machine

Condition: new, Year of construction: 2025, Functionality: fully functional, outer dimension width: 2,100 mm, outer dimension length: 2,000 mm, power: 3 kW (4.08 HP), compressed air connection: 6.5 bar, volume flow: 6 m³/h, Open spray stand 2x2.1x2.2 The overspray during powdering is collected via the suction unit. The powder spray stand is supplied on castors and is therefore mobile. - The suction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. Dob E Rqofhv Tqs Syekl - The absolute filter is located above the booth. 1 Dimensions of the powder stand Width 2,000 mm Depth 2,100 mm Height 2,200 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x600 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter

Year of construction: 2023, Condition: new, A typical coating plant consists of surface pre-treatment (cleaning and / or application of a conversion coating), Dkob Eecv Nl Rj Rq Syjl Intermediate drying, electrostatic coating zone ( booth / powder handling system ) and dryer ( egg oven ). The workpieces are transported through a conveyor system. Our company ROMER® plans, manufactures and assembles complete powder coating lines. Our plants can be visited and tested in Huerth near Cologne. Let us make you an offer for a plant tailored to your application.

Condition: good (used), Year of construction: 2004, Functionality: fully functional, See pictures Debev T S Ste E Rq Syokl

Condition: new, Year of construction: 2025, Some components can be choose: - chamber pretreatement with osmosis plant, - Water drier oven, - Powder curing oven, - manual transportsystem inkl. steel frame, - Controler siemens, Deb Ejizw Hne Rq Syekl Additionsal chooseable components possible.

Condition: new, Year of construction: 2025, Functionality: fully functional, workpiece weight (max.): 200 kg, outer dimension width: 2,300 mm, outer dimension length: 3,636 mm, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension width: 1,400 mm, inner dimension length: 3,225 mm, inner dimension height: 2,000 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Powder combustion furnace Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Dsbeb Dxnwj E Rq Syekl Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Year of construction: 2019, Condition: new, The creation of a written offer / cost proposal for a powder coating system of the company Romer. Dksb E Rq Sjc Sd D Sjysl

Condition: new, Year of construction: 2025, machine/vehicle number: A1481630, Complete finishing line max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm max. weight 50kg (higher weight possible) speed up tp max. 1m/min. (higher speed possible) Please contact us for more information. Dsb E Rebqh R Tjq Syokl

Condition: new, Year of construction: 2025, Functionality: fully functional, temperature: 220 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Powder ovens in various sizes 1 Internal dimensions length 1500 - 6,500 [mm] 2 Internal dimensions width 1700 - 1,900 [mm] 3 Internal dimension height 2,000 [mm] 4 Substructure Steel profile 5 Walls 1 mm galvanized sheet metal on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² Dkeb E Rjfhv Tloq Syjl 7 Oven floor receives 2 entry rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 Fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 Electric motors 1 - 2 pcs. 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Sash or sliding doors on one or both sides 2 - 4 insulated with rock wool 150mm 75Kg/m² Indirect heating via thermoblock 13 Thermoblock stainless steel INOX AISI 316 Heating electric or gas heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection

Condition: new, Year of construction: 2024, Functionality: fully functional, Powder coating plant Rim powder plant Romer Germany Dkeb E Rqoq Ixcte Syol

Condition: new, Year of construction: 2025, Internal dimensions LxWxH 4300x1700x2200mm, Temperature max. 220°C, oil, gas or electrical heated possible, Tracks for hordes waggons possible, Manual or automatic transport usable, Deb E Rqeizw E Uj Syjkl flap or sliding doors producable.

Condition: new, Year of construction: 2025, Functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. powder coating booth, open spray booth The overspray during powder coating is collected by the suction unit. The powder spray booth is supplied on castors and is therefore mobile. - The extraction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. 1 Dimensions of the powder level Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW Deb Eeffwfxo Rq Syjkl 3 Filter Ø 325x800 [mm] 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter 2. powder combustion furnace 1 Internal dimension length 4,000 mm 2 Inner dimension width 1,500 mm 3 Internal height 2,200 mm 4 External dimension incl. thermoblock length 5,250 mm 5 External dimension incl. thermoblock width 2,050 mm 6 External dimension incl. thermoblock height 2,530/2,750 mm 3. switch cabinet 4 Manual conveyor system The "Mantion system" conveyor technology is designed for max. 250 kg per product carrier and 750 kg/ trolley.

Condition: new, Year of construction: 2025, Powder coating system for large parts All dimensions and other changes can be taken into account in the design and planning The offer includes the following components: Cabin for chemical pretreatment (3 zones) with spray ring Walk-in coating cabin Powder gun Powder firing oven Manual conveyor system Electrical control Example: (all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Walk-in cleaning cabin including automatic spray ring 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm height 4,200 mm Walk-in coating booth, manual coating Djbjbhh Aws E Rq Syokl 1 Dimensions of booth length 9,000 mm width 4,500 mm height 3,400 mm 2 Dimensions of booth including extraction length 10,125 mm width 4,500 mm height 3,400 mm powder firing oven 1 Internal dimensions length 6,500 mm 2 Internal dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 External dimensions including thermoblock length 7,600 mm 5 External dimensions including thermoblock width 2,800 mm 6 External dimensions including thermoblock height 3,100 mm Manual conveyor system The conveyor system consists of made of: 1. Support structure, consisting of steel elements, 120x120m/ IPE 160 2. Rollers - No. 9862 GL 4 pieces 3. Pneumatic accessories for locking - unlocking during transfer 4. Rail system - No. 9060 - 234 meters 5. Rollers - No. 9862 GLHT 24 pieces 6. Connecting pieces - No. 9061M 34 pieces 7. Fastening clamps - No. 9067/180 234 pieces 8. Stoppers - No. 9169 21 pieces 9. Movable locking - No. 9601 VM 6 pieces 10. Rigid locking - No. 9601 VF 17 pieces Electrical control The electrical control unit is divided into electrical and automatic control. With it we can control all the units mentioned above and consists of: - PLC - Touch screen 5" color -easy view- - Modem - Thermo-magnetic switch. Fuse (Telemechanique, Siemens, ABB). - Cables, supports, pipes, etc.

Condition: new, Year of construction: 2025, Functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece width (max.): 800 mm, workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Dob Eeum Ufle Rq Syokl Powder curing oven Conveying technology (cycle process) Electrical control system

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece width (max.): 500 mm, workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven Deb E Rjulwg Neq Syokl 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: new, Year of construction: 2025, 1. powder coating oven 1,500 x 1,200 x 1,750 mm 2. powder coating booth -KG DUO-01 3. powder coating system Wagner, - Prima Sprint - 1. powder coating oven 1,500 x 1,200 x 1,750 mm 1 Internal dimension length 1,500 mm 2 Internal dimension width 1,200 mm 3 Internal height 1,750 mm 4 External dimension incl. thermoblock length 2,250 mm 5 External dimension incl. thermoblock width 1,815 mm 6 External dimension incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust air pipe 7 Substructure 1 set of steel profiles 8 Walls 1 set of 1 mm galvanized sheet metal on both sides, RAL outside 9 Insulation walls, ceiling 1 set rock wool 150 mm, floor is insulated with 50 mm 10 Oven floor with 2 run-in rails for rack trolleys 11 Temperature 220°C 12 Fans 1 unit 2,600 m³/hour 13 Electric motors 1 pc. 1.1 kW, 1450 rpm, 3 F, 50 Hz 14 Thermal output 14 kW 15 Hinged doors on one side 2 insulated with 100 mm rock wool Indirect heating via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 Heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 16 burners 1 oven is electrically heated 1 exhaust air 1 piece device for exhaust air pipe, manual flap guide 2. powder coating booth -KG DUO-01 The overspray during powder coating is collected by the extraction unit. The workpieces are hung on a hook in the booth. - The extraction unit is equipped with a 30 l powder container (rollbar). - There are 2 filters in the extraction unit as the 1st stage. - The 2nd stage in the extraction unit is the high-pressure fan. 1 Dimensions of the powder stand Width 1,200 mm Depth 1,100 mm Dkjb E Rq Ssfhxd Usyjl Height 2,380 mm 2 fans 1 pc. 2,500 m³/hour, 1,500 Pa Electric motor 1.1 kW, B5, P2, 380 V 3 Filter Φ 325x600 2 pcs. type filter cartridges 4 Electromagnetic valves 1 pc. 1" "Turbo" Italy 5 Illumination 1 pc. 2x18 Watt= 36 Watt 3. powder coating unit Wagner, - Prima Sprint - 1 Dimensions of the Prima Sprint Depth 725 mm Width 480 mm Height 1.100 mm Weight Approx. 39 kg Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour - Corona hand gun PEM-C4 Ergo - EPG-Sprint control unit - Delivery device with fluid crown ST 550/10 - Powder injector PI-F1 - Equipment cart with vibrating table

Condition: new, Year of construction: 2025, 1,000 x 1,900 x 2,000 mm powder stove, manufacturer Kigo O.E.! 1 Internal dimension length 2.000 mm 2 Internal width 1.900 mm 3 Internal height 2,000 mm 4 Outer dimension incl. thermoblock length 2,300 mm 5 Outer dimension incl. thermoblock width 2,300 mm 6 Outer dimension incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 Walls 1 set of 1 mm galvanized sheet metal on both sides, outside RAL 5005 9 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 10 Oven floor 2 run-in rails for oven trolleys 11 Temperature 220°C 12 Fans 1 unit 6,000 m³/hour 13 Electric motors 1 pc. 1.1 kW, 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 Hinged doors on one side 2 insulated with rock wool 150mm 70Kg/m² Indirect heating via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 Heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 16 burners 1 oven is electrically heated 1 exhaust air 1 piece device for exhaust air pipe, manual flap guide 2. powder coating booth (open spray booth) The overspray during powder coating is collected by the suction unit. The powder spraying booth is supplied on castors and is therefore mobile. - The suction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the cabin. 1 Powder booth dimensions Width 2,454 mm Depth 2,400 mm Height 2,500 mm 2 Fan 1 pc. 6,000 m³/hElectric motor 3.0 kW 3 Filter Φ 325x600 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter 3. powder coating system Wagner, - Prima Sprint - 1 Dimensions of the Prima Sprint Depth 725 mm Width 480 mm Height 1.100 mm Weight Approx. 39 kg. Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour - Corona hand gun PEM-C4 Ergo - EPG-Sprint control unit - Conveying unit with fluid crown ST 550/10 Dkob Eebqk Nbe Rq Sysl - Powder injector PI-F1 - Device trolley with agitator table