Condition: used, Used Praj Industries approximately 5,000 litre/hr inlet flow furfural recovery system. Includes Furfural distillation column with 20 sieve plates in stripping section and 10 sieve plates in rectifying section, forced circulation reboiler, 2 x main condensers, distillate condensate collection tank, azeotrope side drawn collection tank, Azeotrope cooler, water/furfural tank, decanted raw furfural collection tank, vacuum pump, scrubber and various pumps, valves, instrumentation and pipework. Cgjlquovtn Evocbfet

Condition: ready for operation (used), Year of construction: 2004, A wastewater treatment plant based on batch treatment from Antech Gütling (AGW), which was used in the printed circuit board industry (electronics), is available. It consists of a waste water collection station, a batch treatment, a chemical dosing station, a sludge treatment, a post-filtration/pH final control and an exhaust air scrubber. The system treats rinsing water, acidic and alkaline concentrates as well as waste water from the resist developer, resist stripper and solder resist developer areas. The system does not treat solvents, paints, hydraulic oils, used etchings (ammoniacal/acidic), waste water containing chlorite or EDTA-based chemical copper. Capacity: approx. 3m³/h. Documentation is available. Cgjlqucbjtrykwefet

Condition: used, Used Paques type Biopaq IC Anaerobic Digestor. S Cslquevtn Eiscbfjgt ystem includes main BIOPAQ reactor designed for Internal Circulation, Closed. Approximate capacity 248cumt, approximate height of 23,000mm. System was used for COD components metabolization to biogas (methane & co2) with an approximate efficiency of 90%. System includes recirculation degassing tank, gas flare and associated pumps, valves & instrumentation.

Condition: ready for operation (used), Year of construction: 2014, Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible. Cgslsru Hviequcbfet

Condition: used, Used Alfa Laval model GS2-200 stainless steel decanter centrifuge. Cgolovtn D Ssqucbfst Bowl measures approximately 280mm diameter. Maximum solid density 3.0kg/dm3. Unit includes main drive motor and back drive. Includes control panel.

Year of construction: 2019, Condition: ready for operation (used), Two compressors and one dispenser are available. 1) Compressor Renner RSK-Pro 2-30, year of manufacture: 2019, max. pressure: 10bar, volume flow: 4610l/min, power requirement: 30kW. 2) Compressor Atlas Copco GA 15, year of manufacture: 1992, max. pressure: 10bar, volume flow: 1610l/min, power requirement: 15kW. 3) Exhibitor Atlas Copco FD 40, max. pressure: 20bar. Documentation available. On-site inspection is possible. Cgolquceudm Dgjbfet

Year of construction: 1980, Condition: ready for operation (used), Three almost identical vertical agitator bead mills are available. 1) KD15, year of construction: 1980s, flour hopper: 15l, motor power: 17.5kW, rotor speed: 1500rpm, max. temperature: approx. 85°C, machine dimensions X/Y/Z: approx. 1200mm/800mm/1700mm, weight: approx. 1000kg. 2) KD15, year of construction: 1980s, flour container: 15l, motor power: 17.5kW, rotor speed: 1500rpm, max. temperature: approx. 85°C, machine dimensions X/Y/Z: approx. 1200mm/800mm/1700mm, weight: approx. 1000kg. 3) KD20 BC, year of construction: 1980s, flour container: 16.5l, motor power: 17.5kW, flour capacity: 70l-500l/h, flour body diameter: 0.5mm-2.5mm, machine dimensions X/Y/Z: approx. 1000mm/800mm/1300mm, weight: approx. 700kg. Including paint pumps. On-site inspection is possible. Celqeudy R Tsucbfjgt

Condition: ready for operation (used), Year of construction: 1995, Volume flow: 4080m³/h, filter area: 34m², BIA category: G, differential pressure: 1650Pa, filtration surface load: 120m³/h-m², air density: 1.2kg/m³, operating temperature: 20°C. Documentation available. On-site inspection is possible. Cgslqjvva Hwjucbfot

Year of construction: 2010, Condition: ready for operation (used), A planetary mixer Herbst including mixing vessel is available. Speed range: 15rpm-60rpm, machine dimensions X/Y/Z: approx. 950mm/1060mm/2080mm, weight: approx. 530kg. Including mixing vessel, volume: 60l, usable volume: 50l. Documentation available. On-site inspection is possible. Cgjlqucovpvi Ijbfst

Condition: ready for operation (used), Heating output: 42.8kW, tank capacity: 51l, fuel: heating oil, oil consumption: 3.63kg/h, blower output: 1600m³/h. An on-site inspection is possible. Colqovn S Sveucbfegt

Condition: ready for operation (used), Year of construction: 1995, A Gericke pressure vessel is available. Volume: 1750l, height: 2850mm, diameter: 1150mm, max. operating pressure: 3.9bar, max. operating temperature: 150°C, test overpressure: 5.2bar, operating medium: cement-air mixture. Sending vessel included. Documentation available. On-site inspection is possible. Cgelsuml T Hequcbfot

Condition: ready for operation (used), Year of construction: 2004, 1) Schneider Air-Master AM 22-10 B1 screw compressor, volume flow: 3040l/min, final compression pressure: 10bar, connected load: 22kW. 2) OKS compressed air tank, capacity: 1000l, max. operating pressure: 11bar. With 22 bags of sand, 25 kg each, on-site inspection is possible. Csleu Dm I Uoqucbfegt

Year of construction: 1987, Condition: ready for operation (used), A high-pressure cleaning system with Hammelmann high-pressure plunger pump and Volvo Penta engine is available. Operating power: 110kW, speed: 1800rpm, max. medium temperature: 50°C, piston diameter: 30mm, max. operating pressure: 790bar, flow rate: 64l/min, pressure control valve: 096, oil type: BM 5180, oil volume: 7l, oil pressure: 2bar. On-site inspection is possible. Cslou Tuu Ejqucbfegt

Year of construction: 1998, Condition: ready for operation (used), Two Kaeser compressors are available. 1) Kaeser DS 170, year of manufacture: 1998, rated power: 90kW, air volume flow: 14m³/min, max. operating pressure: 7.5bar, machine dimensions X/Y/Z: approx. 3000mm/2000mm/2200mm, weight: approx. 2800kg, load hours: 74833h, operating hours: 98982h. 2) Kaeser AS31, year of manufacture: 1998, rated power: 18.5kW, max. operating pressure: 7.5bar, air volume flow: 3.1m³/min, machine dimensions X/Y/Z: approx. 1500mm/900mm/1300mm, weight: approx. 1000kg, operating hours: 18067h. Documentation available. On-site inspection is possible. Cgelqucjvdu H Iobfst

Year of construction: 1994, Condition: ready for operation (used), Working pressure working chamber/ double jacket: 2.5/2bar, with documentation and accessories, on-site inspection is possible, videos not available. Cslqujrp E Ncscbfogt

Year of construction: 2011, Condition: ready for operation (used), This mixer was used in a paper factory for stirring waste water. Diameter: 2300mm, direction of rotation: left, speed: 22rpm. Agitator body: Hyperboloid with glass fiber reinforced plastic. Motor: Siemens LA100ZLP4EW, Gearbox: Siemens FZAF108B. Total weight: approx. 270kg, drive shaft: DN150, length: 5332mm. Documentation available. On-site viewing is possible. Cgjlqucbor Du Hbefst

Condition: ready for operation (used), Year of construction: 2008, A Wolf air conditioning and ventilation system, consisting of a supply air unit, an extract air unit and a heater, is available. 1) Wolf WK-101 supply air unit, nominal volume flow: 8500m³/h or 2.36m³/s, total/exact delivery pressure: 675Pa/250Pa, fan efficiency: 75.3%, fan speed: 2131rpm, fan power: 2.4kW, differential pressure: 1861Pa, motor power: 3kW, motor speed: 1420rpm. 2) Wolf WK-101 exhaust air unit, nominal volume flow: 8500m³/h or 2.36m³/s, number of filters: 4, filter class: F5, filter type: Biost. Pocket filter TK F5 PVC, initial pressure difference: 69Pa, final pressure difference: 200Pa. 3) Wolf WK-101 heater, nominal volume flow: 8500m³/h or 2.36m³/s, nominal heat output: 51.4kW, air inlet and air outlet temperature: -14°C/4°C, heating medium: water-glycol, flow temperature: 12.8°C, return temperature: 0.7°C, medium flow rate: 4240l/h, glycol content: 30%, max. operating temperature: 120°C, pressure difference air/water: 0Pa/29.5Pa. On-site inspection is possible. Cgelqucbjuqnfaefet

Year of construction: 1995, Condition: ready for operation (used), A high-performance Drais bead mill for the chemical-cosmetic industry is available. Flour chamber volume: 15l, operating temperature: 98°C, speed: 1470rpm, flow rate: 2500l/h, power: 45kW. On-site inspection is possible. Cgelqusvnucdjcbfjt

Condition: ready for operation (used), Year of construction: 1999, A complete LTG Mailänder (now Koenig & Bauer) thermal exhaust air incineration plant is available. Exhaust air volume: 20000Nm³/h, max. solvent volume: 1.5g/m³, max. combustion chamber temperature: 850°C, fuel: natural gas, calorific value: 10kWh/m³, connected load: 45kW, solvent filter capacity: 30kg/h. Documentation available. On-site inspection is possible. Cgelevtqtcoqucbfot

Year of construction: 2023, Condition: ready for operation (used), Two identical compressors including tank, piping and dryer are available. Power: 3kW, operating pressure: 10bar, max. pressure: 13.5bar, machine weight: approx. 236kg. Documentation available. On-site inspection is possible. Cgjlqucbevuaf Defot

Condition: ready for operation (used), Various stainless steel containers and tanks are available. 1) Stainless steel tank, volume: 7000l, diameter: 1600mm, length: 3500mm. 2) Wrapped GRP tank, volume: 9000l, diameter: 2000mm, length: 2900mm. 3) 4x stainless steel tanks. 4) 1x stainless steel tank. On-site inspection is possible. Cgolqucsu Ei S Sobfst

Year of construction: 2006, Condition: ready for operation (used), Flow rate: 20m³/h, delivery head: 41.5m, speed: 2925rpm, power at 50Hz: 5.5kW, 400V/690V, 10.3A/6A, power at 60Hz: 6.3kW, 460V, 10.1A, efficiency class: EFF2, weight: approx. 45kg. Celquceu Iztgebfegt

Condition: ready for operation (used), Year of construction: 2023, A mobile wet extraction system Beck for the extraction and filtration of aluminum dusts and other explosive dusts is available. Suction capacity: 1600m³/h, pressure: 2500Pa, suction nozzle diameter: 200mm, motor power: 1.85kW, fan type: BN 30/28 Ex, machine dimensions X/Y/Z: approx. 1050mm/1000mm/2250mm, weight: approx. 210kg. Documentation available. On-site inspection is possible. Cgelqsu Nlkfsucbfot

Year of construction: 2000, Condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Colqsulkvdeucbfsgt

Year of construction: 1973, Condition: ready for operation (used), An Eirich sand and concrete high-speed mixing plant is available. Volume: 1000l/1600l, Motor power: 90kW, agitator power: 22kW-55kW, mixing plate diameter: 1800mm, mixing plate height: approx. 700mm, discharge opening diameter: 650mm, machine weight: approx. 4000kg. Including discharge unit and screw conveyor. Documentation available. On-site inspection is possible. Colqusuml Tyocbfjgt