Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Gedovnmmzjpfx Anloiu Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Gjdpfx Ansvnq Rkelsiu Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Giodpfx Ajv Hr Nxenleu

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Gisdpsyk Ea Aofx Anlsu

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, power: 2 kW (2.72 HP), filling opening width: 1,250 mm, filling opening length: 1,000 mm, overall weight: 1,300 kg, Technical data: Hopper opening: length x width 1250 x 1000 mm Length x width: 1250 x 1000 mm Cutting unit opening: 562 x 462 mm Feed opening: 1250 x 1000 mm Length x width: 562 x 462 mm Number of shafts: 4 pcs Gedpfx Asyma Tijnlsiu of which: cutting shafts 2 pcs cleaning shafts 2 pcs Number of cutting discs: 23 Shaft speed: 25 rpm.

Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Giedpfx Anjw U Txujlju Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: ready for operation (used), Feature Specification Rotor Size φ ≈ 370 mm × 1500 mm Rotor Speed 80–125 rpm Knife Count Up to 123 (V‑rotor) Power 75–90 kW (electromech); up to 110 kW Infeed Opening 1500 × 1890 mm Weight ~6400 kg Output Particle Size 15–100 mm (exchangeable screen) Drive & Bearings WAP gearbox, sealed bearings Control Siemens PLC Godpfx Ajw A I Tdsnljiu Discharge Belt / screw / suction available Applications Plastics, packaging, wood, fibre, etc.

Year of construction: 2026, condition: new, Our offer includes knives for crushers, shredders, mills, for wood, mdf, hdf, pp, pet, abs, PE. Our knives are made of the best tool steel from the best steel mill in Metal Ravne, Slovenia. Tempered in the best certified hardening plants in Poland in oil o salt. (Not in a vacuum, what makes a difference). We present the certificate of the raw material and the hardening process. Our Knives are subjected to durability tests. We guarantee! Made in Poland = 100% Pricing Knives: - 40x40x23 - M12 (R01) - 8 Euro/1 pcs. - 397x94x35-15 (P66/P132) - 269 Euro/1 pcs. Godpfx Aog Rcigenloiu Full set: 28 x (R01) 1 x (P66) 1 x (P132) _____ = 760 Euro Contact to get a quote for any other knife (Vecoplan, Untha, Kloss, Zeno, Zerma, Goliat, Lindner)

Year of construction: 2006, operating hours: 8,679 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: RS502984, For industrial recycling applications - For particularly tough applications - very compact and robust design - high availability and process reliability - low noise and dust pollution TECHNICAL DETAILS feed opening: 1.230 x 700 mm Fraction sizes (depending on perforated screen): 15 - 40 mm MACHINE DETAILS Power: 60 kW supply voltage: 400 V / 50 Hz Gisdpfxsllwy Uj Anlou EQUIPMENT - Conveyor belt included

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 25,300 kg, power: 210 kW (285.52 HP), For sale is a single-shaft shredder from Doppstadt. It is currently still integrated in our production and can be inspected on site. The conversion is scheduled to take place around the end of July 2026. All technical specifications can be found in the images. If you have any further questions, please feel free to contact us. Giedjyrgibjpfx Anlsu

Condition: new, Year of construction: 2026, Technical Specifications: Mechanism dimensions: 800 x 640 mm Machine drive: 2 x 7.5kW electric motor Transmission: Helical gear Number of shafts: 2 pcs. Knife diameter with Shaft: Knives 310 mm Number of Knives: 40 pcs. Knife thickness: 10 mm Control: SIEMENS PLC Giodpeittpuofx Anlsu Weight: approx. 1800 kg Main features: - A solid and reliable solution, - Custom design tailored to the needs of an individual customer, - High resistance to heavy loads and intensive operation - Designed to shredding PP, PA6, PE plastics, pieces of soft wood, hard drives, aluminum, spiro pipes,cartoon pipes. - Uniquely designed knife shape Number and height of teeth depending on the material to be shredded. - Knives made of special materials dedicated to cold cutting and grinding - Knives made of Hardox 450 steel. - Advanced proprietary Siemens PLC control system that prevents machine blockage and significantly increases shredding efficiency - Low speed 35 rpm with high torque - Helical-bevel gear with appropriately selected power and speed - 12-month warranty. - Service in POLAND

Condition: new, Year of construction: 2026, Shredder ZEIGE300 is a strong and reliable equipment. Godpfx Aneg Rci Ioljiu We have calculated and designed everything so that the machine can withstand the loads that are required to shred plastic and similar materials. The ZEIGE300 Shredder can grind any shape plastic that fits between the blades. We have tested it with HDPE, PP,PET and PS. The shredder has no restrictions on thickness. If the piece of plastic is too thick, the blades will not shred because the machine is designed so that the plastic cannot jam the machine – automatic revers system. PP, HDPE, PS from 0.7mm to 12mm have been successfully tested. The films are too thin and slip between the blades. We have not tested the Shredder on materials such as rubber, tires and thermoset materials The shredder is also designed to be easy to clean and maintain. Very fine shredding is only possible with a shredding of the same material twice. Application: ZEIGE twin-shaft mechanism machines are mainly used in the shredding process, plastic, cardboard, pine boards with low thickness cardboard dividers. Shredder for different types of plastics. Compact mechanism design based on precious plastics – project adjusted to our needs. Technical data: Dimensions of the mechanism: 300x250mm Inlet dimensions, upper part: 515x480mm Drive of the machine: 1x3KW (electric motor) Drive transmission: hardened zebra gear Number of drive shafts: 2 pcs. Number of knives: 26 pcs. Thickness of knives: 6 mm Machine dimensions: 1670x1410x600mm Capacity: 40 kg/h Construction: Solid frame construction with inlet for safety work. Painting: Powder coating + wet paint Control: SIEMENS Algorithm switching on the reverse rotation in case of overloading the machine. We can build any shredder with power up to 2 x 15 Kw. You can send RFQ we are Polish company full production process is done in our factory located in Tarnów. Please send us You material we can test it and design the machine according to your needs.

Condition: used, Year of construction: 2008, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: XR203724, number of blades: 36, rotor length: 2,000 mm, rotational speed (max.): 30 rpm, Single-shaft shredder UNTHA XR2000S, currently in operation in a three-shift system for alternative fuel production, available for sale from January 2026. Rotor length 2,000 mm, 36 rotor knives, hydraulic pusher, two 132 kW drive motors, two slip clutches, two gearboxes. Various spare parts are available in addition to the shredder: spare rotor, spare gearbox, spare motor, screen clamping bars, knives, etc. Gijdpfx Aewz Ex Ujnlou

Condition: used, Year of construction: 1991, overall weight: 2,300 kg, power: 18.5 kW (25.15 HP), VECOPLAN VAZ 120/105-U Waste Shredder / Crusher For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been completely overhauled and technically upgraded in 2025 and is fully operational and ready for use. The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring. The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically. If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to the start position. This significantly improves operating efficiency and reduces unnecessary wear on machine components. If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear. The PLC system also allows adjustment of key operating parameters depending on the material being shredded, including maximum working power, shutdown power threshold, and the forward movement speed of the hydraulic press. This makes it possible to optimize the machine for different materials and ensures efficient and safe operation. Technical Specifications: • Machine type: VECOPLAN VAZ 120/105-U Waste Shredder • Application: shredding particleboard and solid wood, plastic, paper and similar waste • Drive power: 18.5 kW • Throughput: up to 1000 kg/h for particleboard waste • Screen diameter: 25 mm • Rotor: Ø 235 mm (circle), width 1070 mm, 120 rpm • Motor: Rated power: 18.5 kW Rated current: 36.5 A Godpfx Ajt Dh T Djnleiu Speed: 1455 rpm Voltage: 400 V / 50 Hz Protection class: IP54, Type B3 • Drive system: V-belt drive with hydrodynamic turbo coupling (soft start, overload protection) • Hydraulic unit: Drive power: 1.0 / 1.4 kW Maximum pressure: up to 180 bar • Feed opening: 1200 × 1050 mm • Extraction nozzle: minimum air velocity 28 m/s Dimensions & Weight: • Weight: approx. 2300 kg Condition: fully operational after maintenance.

Condition: used, machine/vehicle number: 11403, Rotor blades: 2 x 7 stars Gisdeyx Nlyspfx Anlsu Rotor width: 1200 mm Rotor diameter: 350 mm Inlet: 850 x 1200 Power: 30 kW

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Permissible total weight: 27,000 kg Load capacity protection: Three-sided Operating hours: 3,200 h Gisdpeym U E Hefx Anleu EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service staircase Acoustic start-up warning Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Additional hydraulic connections Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Condition: excellent (used), Year of construction: 2021, operating hours: 1,450 h, functionality: fully functional, total length: 10,900 mm, total width: 2,550 mm, total height: 3,200 mm, overall weight: 25,500 kg, rotor diameter: 680 mm, rotational speed (max.): 31 rpm, rotational speed (min.): 18 rpm, blade width: 60 mm, torque: 240,000 Nm, power: 257.42 kW (349.99 HP), Equipment: rotational speed infinitely variable, Lindner Miura 1500DK – Twin-shaft Shredder Technical Data: - Year of manufacture: 2021 - Operating hours: 1,450 h Drive: - Engine manufacturer: Scania - Engine type: DC09 - Engine output: 257 kW - Fuel: Diesel Shredding System: - Twin-shaft shredder - Hydraulic direct drive (load-dependent control) - Torque: up to approx. 240,000 Nm Chassis / Weight: Godpfx Anoyzdvfeloiu - Crawler tracks - Total weight: approx. 25,500 kg Equipment: - Dust suppression system - FX quick-change system for shafts Input Material: - Green waste - Waste wood - Root stocks - Bulky waste

Year of construction: 2024, condition: like new (used), functionality: fully functional, Replacement shafts for Lindner Urraco 75 for sale For sale: high-quality replacement shafts suitable for a Lindner Urraco 75 shredder. - Application area: waste wood, domestic and commercial waste - Condition: as new / excellent condition - Version: Original Lindner shafts, not aftermarket replicas The shafts are immediately ready for use. Giedpfx Asyzdrgenlsu Please contact us if interested.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 564.86 kW (767.99 HP), VOLVO diesel engine: 768 HP Tilting hopper Gedpfx Aotpqchenloiu Lift-axle Discharge conveyor with overband magnet Radio remote control

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 960 mm, Untha RS 50 Shredder Power: 37 kW / 380 V 50 Hz Electrical cabinet – Siemens Simatic S7 Chamber dimensions: 960x700 mm New knives: 310/2Z and 270/8Z Quick-change screen system. Weight approx. 3,200 kg. Machine is fully operational and ready for use. Serviced by the manufacturer. Gijdpoy R Egqefx Anlju Price on request. More photos and a video of operation available on request. For further information, please call.

Condition: new, Year of construction: 2025, Rotary Blade Model: LINDNER Giodpfxjxn Nvhe Anlou Type: ANTARES Year of Manufacture: 2025 New / Ready for Use We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Rotary Blades Model: WEIMA, GROSS, VECOPLAN Type: WL, WLK, GAZ, VAZ Year of Manufacture: 2025 New / Ready for immediate use 1. Blade 40x40x25 M12 (PC) 2. Blade 40x40x25 M12 (KR) Gsdpfx Ansxw Nrboleiu 3. Blade 40x40x25 M14 (KR) 4. Blade 40x40x20 M12 (KR) 5. Blade 40x40x16 M10 (KR) We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Rotary Blades Model: LINDNER Type: MICROMAT Year of Manufacture: 2025 New / Ready for Use 1. Blade 43x43x20 2pcs (KR) 2. Blade 43x43x20 2pcs (K8) 3. Blade 43x43x23 1pc (KR) 4. Blade 43x43x23 2pcs (K8) Giedpfoxn Nyajx Anlju We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Scraper knife Model: WEIMA, GROSS, UNTHA Type: ZM30, GZ30, RS30 Year of manufacture: 2025 New / ready for immediate use 1. 8Z-66 knife 2. 4Z-66 knife We are a manufacturer of replacement knives and spare parts for crushers and shredders. Gsdpfx Anoxn I R Rolsiu

Condition: refurbished (used), Year of construction: 2007, functionality: not functional, UNTHA RS30 SB-460 Year of manufacture: 2007 Used - Damaged Number of rotors: 4 Grinding chamber: 460 x 500 mm New blades: 1Z-66, 8Z-66 Motor power: 2 x 11 kW, 380 V, 50 Hz New sieve holes: Ø 30 mm Giedoxn Iwkjpfx Anleu Length/Width/Height: 1340/1250/1970 mm Weight: approx. 1100 kg