Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Caodpfexx Sdpsx Afloa Hydraulic travel drive Extended radio remote control with foot switch “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement

Year of construction: 2012, condition: excellent (used), Weima sieve for 4 wave chopper ZM 30 Sieve size: : 20/25 mm Cjdpfx Afohh Dpkolsaa Location: Ex stock 54634 Bitburg - immediately available -

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Csdpfx Afew Am Nqsleaa Testing/demonstration available by appointment upon request.

Condition: refurbished (used), operating hours: 3,700 h, functionality: fully functional, total length: 6,000 mm, total width: 2,500 mm, overall weight: 18,400 kg, year of last overhaul: 2009, The Komptech Crambo 5000 shredder is in perfect condition and has been refurbished in 2009 where it got a new mercedes engine. The Mercedes-Benz V8 engine is 435 PK/320 KW and has 2 turbos, making the machine more fuel efficient and powerful. The engine's working hours are 3700 hours. - The machine includes documentation regarding the inspections and history of the shredder. Additionally included are the schematics of all parts in the shredder and the manual of the engine. - The shredder has a remote control. Caodpfx Afjxyk Agolja If there are additional questions or the wish to inspect the machine then feel welcome to contact us.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 405.26 kW (551.00 HP), Mobile shredder on crawler chassis. Codpfx Afou R Uaxeleaa Diesel engine: 551 HP Folding discharge conveyor Overbelt magnet (neodymium) Radio remote control Detailed description: see pdf-file

Condition: used, Year of construction: 2010, total length: 1,750 mm, total height: 1,660 mm, total width: 1,500 mm, Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 0509 - Rotor width [mm]: 630 - Number of shafts [pcs.]: 1 - Opening width [mm]: 810 - Opening length [mm]: 630 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 28 - Transport dimensions: 1750mm x 1500mm x 1660mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cjdpfx Aoxixitsflsaa Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, operating hours: 119 h, functionality: fully functional, Basic Package Inventhor Type 6 Load-sensing system 500-liter fuel tank Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24 V electrical control – additional electric pump to operate the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Cedoxx Sbnspfx Aflsaa Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional Equipment: 260 kW power train – EV 3-axle drawbar chassis unit Shredding system Size L – 20 teeth Auxiliary hydraulic connections 35–80 l/min Hydrostatic drive Hopper extension 350 mm, watering device both sides 7 m rear conveyor belt Overband magnet – Neodymium Frame for 7 m overband magnet Delivery date to be agreed

Condition: used, Year of construction: 2015, operating hours: 2,055 h, 2015 | Dücker HM 200 Wood Chipper | Used Shredder | 2055 hours 📍Location: Germany, Rheine 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Codsxyvhnepfx Afleaa 👷‍♂️ Inspected by an independent expert 14 inspection points 12 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39537 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS pump unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, subframe/base divided for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Caodpfxsv Hr Nxe Aflea

Condition: good (used), Year of construction: 1993, operating hours: 3,467 h, functionality: fully functional, machine/vehicle number: 165, overall weight: 18,000 kg, total width: 2,550 mm, total length: 12,000 mm, total height: 3,000 mm, transport width: 2,550 mm, transport length: 12,000 mm, transport height: 3,000 mm, power: 243 kW (330.39 HP), Post-shredding basket 150mm diamond Cajdewh Tdxepfx Aflja

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Cajdpfxjw Rz Rqj Aflsa Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control

Condition: excellent (used), Year of construction: 2000, Rotor Width : 1350 mm Rotor Diameter : 370 mm Hopper dimensions : W 1350 x 1450 mm Hydraulic infeed draw, with 45 degree tilt Engine size : 30 Kw Siewe : Ø 30mm Extra Siewe : Ø 20mm Screw conveyer : 5000 mm Extra set of knives included ( 40 x 40 mm, 4 sides ) Redler/chain conveyer : 5000 mm 45 degree angle with electro magnetic separator( nails/screws) Codpfxowf Sgmo Afljaa 10 feet shipping container with control panel/hydraulic station inside Machine measures : L 3100mm ( +1000mm hydraulic draw ) x W 2100mm x H 4100 mm Complete unit still connected to power, can be examined in working condition

Condition: used, Year of construction: 2024, operating hours: 630 h, functionality: fully functional, Basic package AK565 Plus: MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tires: 435/50 R 19.5 Hydraulically adjustable support leg Splash guards (internal and side fenders) Permissible total weight: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust air directed upwards Load-dependent material feed control incl. automatic reversing of the scraper floor Fuel tank: 600 liters Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally positioned lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support leg and opening/closing rear hood, folding in/out discharge conveyor, releasing drive) when engine is off Cjdpfx Aoxx R Akeflsaa 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Separate drive for feed roller / scraper floor - "Twin Drive" Rear discharge conveyor with anti-magnetic center piece - belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – height adjustable Underbelt - belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Drive system preparation Reinforcement plates for the intake hopper (material: Hardox), both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic drive system Additional hydraulic connection 20 l/min "Bear Paw" flail tips Impact plate with strike bar and tooth row Neodymium magnetic roller incl. chute NEODYM overband magnet for rear discharge conveyor Frame for overband magnet Moistening system LED lighting package: engine compartment and rear discharge conveyor Delivery date by arrangement

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. A concrete shaft is also included. Cjdpsw Nyt Iefx Aflsaa The machine is fully operational and can be inspected during operation.

Condition: excellent (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 1754, Arjes Impaktor 250 EVO II with a set of paddle shafts - ONLY 200 OPERATING HOURS!!! Discharge height: approx. 3300 mm Belt width: approx. 800 mm Hopper capacity: 2.25 m³ Shaft length: 1500 mm Weight without options: approx. 13.5 t Details: Drive - Volvo Penta diesel engine ---> 129 kW Crawler chassis Hook lift Shredding unit: Paddle shafts for wood, plastic, commercial waste, etc. Tool shaft length approx. 1500 mm Shredding unit open Fixed hopper Remote control Colour RAL 2004 - 7015 ---> orange-grey Water spray system Optional: Caodpfxjxzcizj Aflea Used concrete shafts THE MACHINE HAS BEEN USED EXCLUSIVELY FOR PAPER PROCESSING!!!

Condition: used, Year of construction: 2011, functionality: fully functional, Höcker shredder PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Codpfx Afew Rcq Seleaa Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Remark: The machine is in working condition. It has been checked and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by appointment. We are also happy to carry out tests with your material on request for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 200 kW (271.92 HP), Boost your waste wood processing efficiency with this Komptech CRAMBO 5200 E direct, a robust industrial shredder renowned for its high throughput and reliability. Manufactured in 2016 and in used condition, this model features a powerful electric drive, delivering consistent performance with low operating costs and noise levels. The integrated Multistar 2-SE star screen ensures precise material separation, complemented by a swivel conveyor and overband magnet for enhanced sorting and metal removal. Complete with control cabinets, this shredder is ideal for operations seeking advanced processing capabilities and maximum productivity. Don’t miss the opportunity to upgrade your plant with this proven solution from Komptech. Caedpfxexv Acqo Afloa

Condition: reconditioned (used), Year of construction: 2020, operating hours: 3,300 h, functionality: fully functional, total width: 2,500 mm, overall weight: 28,000 kg, power: 567.07 kW (771.00 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16 L 770 HP, 3,300 operating hours Cjdpfjw S Iiiox Aflsaa - Conveyor belt as new, rollers replaced - Fine shredding shafts 12-9 as new - Counter-blade as new - Two hoppers - Long discharge conveyor - Magnetic belt - Track undercarriage guard - Cleanfix reversible fan

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Codpfx Afoxx Rrrjloaa Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 480 mm, number of blades: 84, rotor width: 1,500 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Genox BH1500L - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 150kW (2x75kW) Drive power with VFD motor controllers and heavy duty oversized gearboxes, 80rpm shaft speed. 1500mm wide x 480mm diameter Rotor with 84pcs, 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Casdpfox Aq R Nex Aflja Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. This is an ex-display machine used only for show at a recent exhibition and is available immediately, ex-works our EU Workshop based in Frankenthal, Germany.

Condition: good (used), Year of construction: 2018, operating hours: 1,011 h, functionality: fully functional, Single-shaft shredder GROSS, Model GAZ 82 S, Year of manufacture: 2018 Technical data: Manufacturer: GROSS Apparatebau Model: GAZ 82 S Year of construction: 2018 Operating hours: 1,011 Drive power: 37 kW Feed opening: 800 x 1,200 mm Hopper capacity: 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed: 60–120 rpm Extraction port diameter: 200 mm Dimensions: approx. 2,100 x 1,700 x 1,750 mm (LxWxH) Weight: approx. 2,500 kg Materials: Wood, cardboard, plastic Cedpjw Rcr Njfx Afleaa Accessories: Hopper Remarks: The shredder is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video is available on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. On request, we also carry out test runs with your material for a handling fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data is based on manufacturer information. We accept no liability for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works, prepaid, without warranty or guarantee.

Condition: used, Year of construction: 2023, operating hours: 1,400 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electric control – additional electric pump for operation of the following functions with the engine switched off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: 260 kW drive train – electric version 400 mm track undercarriage Size L shredding system – 20 teeth Size L limiter Caedpfxoxx Rlfe Aflea Auxiliary hydraulic connections 35 – 80 l/min 7 m rear conveyor Neodymium overbelt magnet Frame for 7 m overbelt magnet Hopper extension 350 mm, water spray unit on both sides Delivery date by arrangement

Condition: good (used), Year of construction: 2017, functionality: fully functional, Vecoplan Shredder, Type VAZ 110, year of manufacture 2017, with hopper and extraction port. Manufacturer: Vecoplan Type: VAZ 110 Year of manufacture: 2017 Motor rated power: 18.5 kW Frequency inverter rated power: 22 kW Feed opening: 1200 x 1075 mm Rotor diameter: 250 mm Rotor length: 1075 mm Rotor speed: 90-250 rpm Number of cutting tools: 27 Throughput: 2 cbm/h Screen hole size: 20 mm Extraction port diameter: 200 mm Dimensions: approx. 2355 x 1590 x 980 mm (LxWxH) Weight: approx. 1800 kg Accessories: Spare parts package with 20 mm screen, 1 set of tools, cutters and counter cutters, motor, plastics, springs, etc. Materials: Wood waste, films, packaging material, chipboard, paper, textiles Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or YouTube channel. Complete documentation including CE declaration is available. Inspections can be arranged at any time by appointment. On request, we are also happy to carry out test runs with your material for a handling fee. If you have any questions about the machine, we are available by phone Monday to Thursday from 08:00 to 14:00 h and Friday from 08:00 to 13:00 h. Cjdpfxow Rcrie Afljaa Please note: All technical data is based on manufacturer information. We do not accept liability for the information provided or any possible errors. All offers are subject to change, prior sale, and revocation at any time. Inspections can be arranged upon request. Sale is ex location, without warranty or guarantee.

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV Csdpfxexx N T Ij Afloaa 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors Caodpsxx N Dgefx Afloa - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement