Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Gbodpfx Ajxx Tfzjansw Frame for overband magnet Spraying system

Condition: used, Year of construction: 1994, functionality: limited functionality, Rotor shear UC 140, with hydraulic pressure unit (HNDE), Gbodpo Ai Htfofx Aanow Drive: 2 x 22 kW, control cabinet, cutting unit size: 1450 mm x 1000 mm, blade width: 85 mm. The machine is operational and shows little wear, however, the cutting unit requires repair (3 blades are damaged).

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Tires 385/65 R22.5 Gjdpjzp H Tysfx Aansbw Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0710, power: 51 kW (69.34 HP), type of input current: three-phase, sieve perforation: 20 mm, input voltage: 380 V, Robust industrial CSB wood shredder, Woody K45 type, manufactured in 2015. Equipped with a hydraulic feed ram, discharge conveyor belt with a head pulley magnet, and discharge auger. Suitable for processing MDF, chipboard, solid wood, pallets, and various wood waste streams. ✅ Heavy-duty industrial design ✅ Hydraulic push ram for consistent feed ✅ Magnet roller for automatic removal of metal contaminants ✅ Complete line with conveyor belt and discharge auger ✅ PLC-controlled operation Godpfx Aasz Dibasnobw ✅ CE-compliant machine

Condition: used, Year of construction: 2019, operating hours: 19,020 h, functionality: fully functional, total length: 5,813 mm, total height: 3,111 mm, overall weight: 23,200 kg, total width: 2,925 mm, rotor length: 2,200 mm, number of blades: 84, year of last overhaul: 2025, # Lindner Komet 2200 HP – Year of Construction 2019 – 400 kW – approx. 19,020 operating hours For sale is a powerful and regularly maintained Lindner Komet 2200 HP secondary shredder, year of construction 2019, from our existing industrial waste processing plant. The machine was used for the secondary shredding of processed material for the production of substitute fuels (SFS) and was permanently integrated into our stationary production line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Komet 2200-1 HP - Year of Construction: 2019 - Operating Hours: approx. 19,020 h - Drive Power: 2 × 200 kW (400 kW) - Speed: 355 RPM - Operating Voltage: 400 V / 50 Hz - Cutting Unit: 172R - Screening Unit: DM 30 - Hydraulic feed system - Frequency-controlled drive - Siemens HMI touch panel, 15 inches - Freestanding hydraulic unit - Mechanical safety couplings - Mechanical central lubrication ### Equipment and Features Powerful belt drive with ABB asynchronous motors and frequency inverters to adjust the shredding performance to the respective material. Hydraulic feed system for controlled material feed, reusable replaceable knives, and hydraulically pivoting screening unit and stripping comb for maintenance work. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists with the manufacturer, Lindner Recyclingtech, for the Komet 2200 HP. In addition to the scheduled maintenance, necessary repairs and wear parts were continuously replaced. Gjdpe Ahnl Rofx Aanebw Important maintenance measures: - 2025: Complete clutch replaced. - Regular rotor resurfacing: The rotor is completely resurfaced at regular intervals to repair worn areas and extend its service life. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate control room and are thus protected from dust and dirt from the production environment. ### Spare Parts Various available spare parts are included in the scope of delivery and will be handed over to the buyer upon purchase. ### Sale Due to Plant Modernization The sale is taking place due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on-site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price upon request.

Condition: good (used), Year of construction: 2021, operating hours: 7,000 h, functionality: fully functional, overall weight: 46,000 kg, rotational speed (max.): 32 rpm, rotational speed (min.): 18 rpm, power: 566.33 kW (769.99 HP), Equipment: rotational speed infinitely variable, Lindner Urraco 95 DK – Year of manufacture 2021 – Well-maintained condition For sale is a Lindner Urraco 95 DK from the year 2021 with 7,000 operating hours. The shredder is in a well-maintained and operational condition. The exact condition can be seen in the pictures. The machine is equipped with the DK4 package and therefore has a reinforced gearbox and a reinforced shredder frame. ⸻ Equipment / Scope of supply Optionally available at an extra charge: * Individual rotor configurations for different materials, e.g. waste wood (A1–A4), household and commercial waste, roots, aluminum, and scrap. * Belt magnet for separating ferrous metals. * Rubber track system to protect the ground when used on sensitive surfaces such as asphalt and concrete. All of the mentioned equipment options are optional and can be purchased additionally at an extra charge, depending on your needs. They are not included in the basic price. DK4 package with reinforced gearbox and reinforced shredder frame. Gbeds Afl Niopfx Aanjw ⸻ Technical data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,000 Engine power: approx. 566 kW (approx. 770 hp) Emission standard: Stage V / Tier 4f (depending on the model) Rotor length: approx. 2,500 mm Rotor diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: Track-type, hydraulically driven Application areas: Scrap, commercial waste, bulky waste, mixed waste, wood, recyclable materials ⸻ Condition: Well-maintained machine Fully functional technically Sale is made as inspected on site Additional information / Maintenance history The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work has therefore been carried out professionally according to the manufacturer's specifications and documented. Notes: • Sale is made excluding any warranty. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, incompleteness or changes in the information. The sale is made exclusively subject to prior sale.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 5,873 h, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 10,500 mm, total height: 3,400 mm, total width: 2,800 mm, rotor length: 3,000 mm, rotor width: 3,000 mm, rotational speed (max.): 31 rpm, year of last overhaul: 2026, Doppstadt DW 3060K Buffel Type F Bio Power - Year of manufacture: 2017 - Operating hours: 5,873 - Engine: MTU 6R 1300 (490 hp) - Weight: 30,000 kg - Number of teeth: 42 - Radio remote control Gsdps Aarp Ejfx Aanjbw - Cable control - Central lubrication system - 7m rear discharge conveyor - Magnetic separator (over-belt) - BioPower system – increased power and efficiency - Tracked chassis - Working shaft: 3000x600 mm Machine has been refurbished and is available immediately. (Komptech Terminator, Tana Shark, Eggersmann, Hammel, Arjes, Lindner, UNTHA)

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,947 h, functionality: fully functional, machine/vehicle number: 1381, overall weight: 18,920 kg, year of last overhaul: 2026, We offer this Doppstadt AK 560 ECO Power high-speed shredder, which has been fully refurbished and brought back to perfect working order by the dealer. It was first put into service in 2020. Features include: - 6m rear conveyor - Overhauled shredding chamber, new rotor - New hammers - New hopper and roof plates - Equipped with two screens - Complete engine overhaul - New flexible coupling - Up-to-date technical inspection A list of work carried out is available upon request. If you have any questions or require further information, please do not hesitate to send us a message or call us. Gbodpfx Aaoy Tbcgonew

Condition: excellent (used), Year of construction: 2021, operating hours: 1,450 h, functionality: fully functional, total length: 10,900 mm, total width: 2,550 mm, total height: 3,200 mm, overall weight: 25,500 kg, rotor diameter: 680 mm, rotational speed (max.): 31 rpm, rotational speed (min.): 18 rpm, blade width: 60 mm, torque: 240,000 Nm, power: 257.42 kW (349.99 HP), Equipment: rotational speed infinitely variable, Lindner Miura 1500DK – Twin-shaft Shredder Technical Data: - Year of manufacture: 2021 - Operating hours: 1,450 h Drive: - Engine manufacturer: Scania - Engine type: DC09 - Engine output: 257 kW - Fuel: Diesel Shredding System: - Twin-shaft shredder - Hydraulic direct drive (load-dependent control) - Torque: up to approx. 240,000 Nm Chassis / Weight: - Crawler tracks - Total weight: approx. 25,500 kg Gedpfx Aajyzdvfenjbw Equipment: - Dust suppression system - FX quick-change system for shafts Input Material: - Green waste - Waste wood - Root stocks - Bulky waste

Condition: excellent (used), Year of construction: 2022, operating hours: 1,850 h, functionality: fully functional, machine/vehicle number: 220, total length: 13,000 mm, total width: 5,700 mm, total height: 4,200 mm, overall weight: 37,000 kg, power: 404.52 kW (549.99 HP), TITAN 950 ARJES, in very good condition and with very few hours of use. Equipped with a shredding rotor and a magnetic pulley on the cross conveyor, this shredder completely removes ferrous materials. Gjdpfez D Dqcex Aanobw

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Gsdpfxezn Icye Aansbw Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts - Screens will be newly manufactured according to the required grain size - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: Gbedpfx Aozdf Rusansw - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: excellent (used), Year of construction: 2004, operating hours: 11,400 h, functionality: fully functional, Willibald MZA 4600 shredding machine, manufactured in 2004, with 11,400 operating hours and in perfect condition. Gbsdpfx Aao Ah Rt Uonsw

Condition: used, Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, overall weight: 20,500 kg, number of blades: 50, control cabinet length: 3,000 mm, control cabinet height: 2,300 mm, power: 200 kW (271.92 HP), rotational speed (max.): 264 rpm, # Lindner Power Komet 1800 – 200 kW – Year of Manufacture 2012 – Secondary Shredder For sale is a regularly maintained and well-kept Lindner Power Komet 1800, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial single-shaft secondary shredder for the processing of pre-treated commercial and construction mixed waste and was permanently integrated into our stationary processing line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Power Komet 1800 - Year of Manufacture: 2012 - Machine Number: 1953 - Operating Hours: approx. 38,000 h - Machine Weight: approx. 20,500 kg - Main Drive: 200 kW - Hydraulic Drive: 11 kW - Operating Voltage: 400 V / 50 Hz - Rotor Speed: 264 rpm at 50 Hz - Number of Blades: 50 pieces - Blade Dimensions: 172 × 57 × 28 mm - Screen Hole: Ø 30 mm - Frequency Inverter: ABB ACS-800 - Hydraulic Unit: Bosch Rexroth - Design Throughput: approx. 5 t/h (material-dependent) ### Equipment and Application Area The Power Komet 1800 features a frequency-controlled 200 kW main drive and a hydraulic feed unit for uniform material feeding. The machine was used for the secondary shredding of already pre-sorted and pre-shredded commercial and construction mixed waste. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its operating life. A separate maintenance contract with the manufacturer Lindner Recyclingtech exists for the Lindner Power Komet 1800. In addition to the regular maintenance work, necessary repairs and wear parts were continuously replaced. Important maintenance measures: Gbodpfx Ao Ahnqyjansw - Drive bearings completely renewed. - Drive belts completely renewed. - Rotor completely re-armored. The complete rotor re-armoring is carried out regularly to repair areas subject to wear. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate switchgear room and are therefore protected from dust and dirt from the production environment. ### Sale Due to Plant Modernization The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on site during the dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your contact.

Condition: used, Year of construction: 2012, operating hours: 33,400 h, functionality: fully functional, control cabinet height: 2,300 mm, number of blades: 28, year of last overhaul: 2025, overall weight: 33,000 kg, type of input current: AC, Lindner Jupiter 2200 – Year of manufacture 2012 – 264 kW – Pre-shredder For sale is a powerful and regularly maintained Lindner Jupiter 2200, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial pre-shredder for processing various commercial waste and recyclable material fractions and was permanently integrated into our stationary production line. Technical data Manufacturer: Lindner Recyclingtech Model: Jupiter 2200 Year of manufacture: 2012 Machine number: 1744 Machine weight: approx. 33,000 kg Drive power: 2 × 132 kW (264 kW total) Rotor speed: 51 rpm at 50 Hz Operating voltage: 400 V / 50 Hz Number of knives: 28 pieces Knife dimensions: 116 × 116 × 37 mm Screen opening: Sickles 79 mm Frequency converter: ABB ACS-800 Hydraulic unit: Bosch Rexroth Hydraulic drive: 11 kW Hydraulic oil tank: 400 liters Equipment and special features The Jupiter 2200 features a frequency-controlled drive and a hydraulic feed unit for controlled material feed. The robust design and powerful cutting unit enable use in industrial recycling and processing plants. Maintenance and servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists for the Jupiter 2200 with the manufacturer Lindner Recyclingtech. In addition to the regular maintenance, extensive maintenance and modernization measures were carried out. Important work carried out: Both couplings completely overhauled. Control computer and display renewed. Rotor completely armored and regularly serviced. Air conditioning unit renewed. Both frequency converters (FC) overhauled. Complete new set of sickles installed. The corresponding maintenance and service records are available and can be viewed upon request. Protected housing of the control cabinets The associated control cabinets are located in a separate control room and are therefore protected from dust and dirt from the production environment. Sale due to plant modernization Gbodpfs Ahnlbox Aanew The machine is being offered for sale as part of the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. Dismantling and loading We will personally assist the buyer on site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Mobile shredding plant LINDNER URRACO 4000DS (semitrailer version) Gsdpfx Aez Hw Nqjanebw Diesel engine: 350 hp Discharge height of discharge conveyor: > 4.50 m

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2454320049, overall weight: 130 kg, total width: 660 mm, total length: 660 mm, total height: 980 mm, power: 1.5 kW (2.04 HP), input voltage: 230 V, cutting width (max.): 420 mm, Cardboard shredder for recycling cardboard and producing void fill material (cardboard mesh). Includes AL-KO extraction unit. Easy adjustment of the cardboard mesh width via a movable stop. Regardless of the width of the cardboard to be shredded, cardboard mesh of uniform width is always produced. Gbsdpfsy Dqvdjx Aanjw

Condition: reconditioned (used), Year of construction: 2019, operating hours: 5,144 h, functionality: fully functional, overall weight: 25,000 kg, total width: 2,550 mm, total length: 9,500 mm, total height: 3,400 mm, transport width: 2,550 mm, transport length: 10,000 mm, transport height: 3,400 mm, year of last overhaul: 2026, rotor diameter: 600 mm, rotational speed (max.): 30 rpm, Doppstadt DW 3060 Buffel – Type F – BioPower - Year of manufacture: 2019 - Operating hours: 5144 - Engine: MTU 6R 1300 (490 hp) - Weight: 25,000 kg - Number of teeth: 42 pcs. - Hydraulic self-propelled drive - Remote radio control - Central lubrication system - Rear discharge conveyor (5.5 m) - Magnetic separator (overband type) - BioPower system – increased power and efficiency - 3-axle chassis - Working shaft: 3000 x 600 mm Machine has been refurbished and is available immediately. Gjdpfx Aas Aarnzsnebw

Condition: used, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, Year of manufacture: 2017 Colour: Grey Empty weight: 2.500 kg - Details: - └ Description: Excluding magnet - Year: 2017 - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 Gbedpfj Ab An Iex Aanew - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 6,000 V, overall weight: 6,200 kg, rotational speed (max.): 1,490 rpm, input current: 255 A, input frequency: 50 Hz, This high-voltage motor was kept in stock after being overhauled but was never installed. In the meantime, it is no longer needed, as a more powerful type of motor has been installed in this system. Gbsdpfxj Ahngwe Aanew

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg - Remote control Gbsdsz Idb Njpfx Aanew - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm - Teeth: 24

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 250 mm, rotor length: 600 mm, power: 30 kW (40.79 HP), Pre-shredder: Gbsdsztaurjpfx Aanow 1 unit Forrec AE 600/30 single-shaft shredder: - Drive: 30 kW - Dimensions: 2,250 x 3,050 x 1,600 mm - Rotor diameter: ø 250 mm - Hopper dimensions: 1100 x 1000 mm - Hopper capacity: 750 liters - Production: 600 kg/hour (mixed cables) - Weight: 1,750 kg - 1 set of original Forrec spare parts Accessories: - Electric lift table for material feeding - Conveyor belt for shredded material discharge - Metal platform for material feeding The machine has been disassembled and is in storage. Therefore, a functional test is not possible. Pickup only in 14727 Premnitz.

Condition: used, Year of construction: 2025, operating hours: 650 h, functionality: fully functional, overall weight: 27,000 kg, total length: 10,030 mm, total height: 3,675 mm, total width: 2,540 mm, rotor length: 3,000 mm, power: 405 kW (550.65 HP), ejection height: 4,030 mm, For sale is a PRONAR MRW 1.300 single-shaft pre-shredder (mobile slow-speed shredder) in very good condition. Similar design to the legendary DW-3060 "Buffalo". We are very satisfied with the machine, which is in top condition and has only a few operating hours. The reason for the sale is solely that the input material for the company has changed, and therefore a change to a different (chipping) shredding technology is necessary. The machine is regularly used and can be inspected upon request! Diesel engine Volvo Penta 405kW/550 hp, Stage 5 Rotor with 42 bolted tools; length 3000 mm 3-axle chassis with 27 tons; approved for up to 80 km/h Gbsdpfxjzrd Tie Aanjw 2 screening baskets Overband magnet Long discharge conveyor; discharge height 4030 mm Central lubrication Radio remote control Hopper volume 6.4 m³ / hopper dimensions 3650x2200 / hopper discharge height 2870 mm Direct sale by Hannes Schirnhofer - Schirnhofer wood chip production - Flattendorf, Styria

Condition: excellent (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m Gbedpfo Ad N Rnox Aanjw - Over-band magnet - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, Cable granulating plant GUIDETTI SINCRO MILL 530 + pre-shredder PMG-H 900 – immediately available – like new For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: Gsdpfx Aey Ahlyjanebw • Guidetti Sincro Mill 530 cable granulating plant • Guidetti PMG-H 900 pre-shredder • External filter system The plant was installed at a customer's site, tested, and then professionally dismantled. Due to a project change, the plant is now being offered for sale. Condition: almost like new (only test operation) Availability: immediately from stock – no delivery time Price: attractive price advantage compared to a new plant. Special price applies for purchase completion by the end of November 2026 --- Special advantages: • Immediately available – no delivery time of several months as with new machines • Only operated in test mode – accordingly very low wear • Complete system incl. pre-shredder • Proven Guidetti technology --- Description: The Sincro Mill 530 is a compact, fully integrated cable granulating plant for processing mixed copper and aluminum cables – without pre-sorting. The system consists of: • Granulator (cutting mill) • Zigzag separator • Turbine for fine grinding • Dry separation table Material purity up to 99%. In combination with the pre-shredder PMG-H 900, it results in a powerful recycling line for industrial applications. --- Technical data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • Processing of copper and aluminum cables --- Technical data pre-shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for pre-shredding cables, non-ferrous metals and plastics. --- Note: The plant is available in the short term. Subject to prior sale. Inspection possible by arrangement.