Used Sorting equipment for sale (48)

Condition: new, TC23072, OPTO Engineering, Bi-telecentric lens for 2/3" detectors Model: TC23072 Condition: New Dcoljtyx Swoq Iwdzsg

Year of construction: 2015, Condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dcelqju R Rtbe Iwdzeg Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Archive photo Machine is currently being refurbished, delivery time 3 months Sorting machine for sorting out all non-ferrous and ferrous metals The machine can sort out ferrous metals separately, ferrous iron does not have to be separated out beforehand. Test sorting in the Habdaufkege process possible. The machine will be demonstrated in working order. The sale is without guarantee and warranty, commissioning possible worldwide for an additional charge. Dcelq Iweiqk Aqodzeg

Condition: good (used), 1 x ICON Engineering Crate Washer 3 phase Located in Scotland Dcelq Iwjt Nfzijdzeg UKFM2-6026

Year of construction: 2002, Condition: good (used), Functionality: fully functional, Wagensveld machine and steel construction – sorting cabin Broeckx Plastic Recycling B.V. This sorting cabin was put into use in 2002 for the manual sorting of industrial plastic waste. - Closed sorting cabin - Feed belt (slowed) - Sorting belt (4 speeds) Dcelsvbh Eleq Iwdzjg - Waste discharge belt - 7 sorting bunkers 32.5 m3 - 1 dump bunker - 12 sorting places

Condition: used, No. 10012 Feed hopper Rema Dolqov N E Iyo Iwdzjcg Used Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, TC23072, OPTO Engineering, Bi-telecentric lens for 2/3" detectors Model: TC23072 Delqotu U Eij Iwdzecg Condition: Used

Condition: used, Overview of the equipment of a used sorting plant, year of construction 2009, with a sorting capacity of 25,000 t/year For sale is a complete used sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece sorting cabin with an integrated office (control room), external dimensions 14,200 x 11,400 x 4,350 / 8,170 mm (l x w x h), with 3 sorting belts and 10 sorting places, air-conditioned (heated). 1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S Dcelq Iweu Tg Tyedzsg 1 piece infeed conveyor belt, right, no. 10, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor belt, centre, no. 11, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor, left, no. 12, dimensions 6,360 x 1,200 mm, drive power 3 kW 1 piece sorting belt, long, right, no. 15, dimensions 8,350 x 1,200 mm, drive power 2.2 kW 1 piece sorting belt, short, right, no. 17, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece sorting belt, long, centre, no. 14, dimensions 8,350 x 1,200 mm, drive power 2.2 kW 1 piece sorting belt, short, center, no. 16, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece sorting belt, left, no. 13, dimensions 5,360 x 1,200 mm, drive power 2.2 kW 1 piece reversing belt, below sorting belts 14 and 15, no. 18, dimensions 5,200 x 1,000 mm, drive power 2.2 kW 1 piece discharge belt (short), no. 17, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece discharge conveyor, no. 23, dimensions 8,300 x 1,000 mm, drive power 3.0 kW 1 piece bunker belt BB1 (from Hartner ballistic separator) dimensions 25,400 x 2,000 mm 1 piece bunker belt BB2, dimensions 24,000 x 2,000 mm 1 piece bunker belt BB3, dimensions 24.000 x 2.000 mm 1 piece bunker belt BB4, dimensions 11,000 x 2,000 mm 1 piece long discharge conveyor to the warehouse, No. 22, dimensions 28,200 x 1,000 mm, drive power 9.2 kW Technical data of the ventilation system for the sorting cabin: Manufacturer VTS Ventus, Poland Type VS-120-R-H/S Min. air capacity 5,815 m³/hour Max. Air flow rate 17,610 m³/hour Connected load 108 kW Static pressure 837 Pa Stand-by pressure 600 Pa Filter designation VS 120 B.FLT F5, type EU5 Filter size 592 x 287 mm Remark: The plant is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without material input) if required. The sale of the plant takes place ex location, Germany. The dismantling and loading of the entire plant as well as the broom-clean handover of the hall is at the risk and expense of the buyer. Technical documentation for the system and the components is only available in German. An inspection of the plant is possible by arrangement. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), Sorting machine to sort out all metals NF and FE The machine can sort out Fe metals separately,Fe iron does not need to be sorted out before. Few operating hours, test sorting in the Habdaufkegeverfahren possible . The machine is demonstrated in working order. The sale is made without warranty and guarantee . commissioning worldwide against surcharge possible. Deljmccu Doq Iwdzscg

Year of construction: 2019, operating hours: 1,200 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 6223, Kiverco Ps122 picking station for sale Machine has the following options - Overband Magnet - Wind shifter (option) - Emergency stop Pull Cord in picking cabin Djlqev Ew N Ue Iwdzocg - Auto-Grease Dispensers Fitted to Each Bearing - Heated cabin - Hydraulic system for set up - Generator (optional) - Unbraked wheeled site axle

Condition: good (used), metal detector S+S for sorting metal parts from a material flow. The material passes through a chute and the metal parts exit from another chute. chute inlet 70mm . Dcolstu Nnusq Iwdzeg sold with stand, height 2m.

Year of construction: 2011, operating hours: 2,500 h, Condition: good (used), machine/vehicle number: L10022-011, Redox Windsifter/ windsichter Hook container/ hacken lift vibrating feeder moveable separating drum 9095 mm total length Dcslq Ijunag Dewdzjg 2642mm total working width adjustable legs westeria, nihot, walair

Condition: excellent (used), Functionality: fully functional, Year of construction: 2017, Used Hein Lehmann Double Deck Flip Flow Screener Dcolqou U N Ebj Iwdzjg Year 2017 Screening Area 6 Metres x 1.2 Metres Double Deck c/w Poly Mats Top & Bottom Deck Complete With Chute and Framework Electric Motor c/w Prop Shaft Very Tidy Unit Weighs Approx 11 Tonne

Condition: used, For sale is a sorting plant for commercial waste, paper, cardboard, plastics etc., year of construction 2022, only 151 operating hours, with a sorting capacity of up to 20,000 tonnes/year, in two-shift operation. The plant consists of the following components: 1 piece feeding / dosing hopper with steel slat conveyor and a dosing drum, manufacturer Bollegraaf, type BDF-1200/2000 1 piece ascending conveyor between the feed hopper and the sorting cabin, manufactured as a troughed conveyor, manufacturer Lubo Systems, type TBM 2000 x 15000 1 piece sorting cabin, air-conditioned (heated), measuring 14,500 x 5,732 x 3,270 mm (l x w x h), with 4 sorting stations, 8 discharge chutes and 5 material bunkers underneath. The concrete blocks are not included in the scope of delivery of the sorting system. 1 piece sliding belt conveyor as sorting belt, manufacturer Bollegraaf, type HBGT 250/1400 * 15000 1 piece ventilation system for the sorting plant with an air capacity of 8,000 m³/hour, heated with 93.8 kW electrical heating power, manufacturer MANDIK. The area required to install the sorting system in its current configuration is at least 46 x 7.5 m (345 m²). The height of the sorting cabin including the ventilation pipes is 7,370 mm. Remark: The system is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without the use of materials) if required. The plant is sold ex works. The dismantling and loading of the entire system as well as the broom-clean handover of the hall is at the risk and expense of the buyer. The owner can provide sporadic logistical support during dismantling with forklift trucks, wheel loaders and excavators. Dcelq Ieu Tg S Aswdzeg Technical documentation for the system and the components (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) is only available in German. The existing control cabinet controls all of the customer's machines in two halls and is therefore not included in the scope of delivery of the sorting system. The control cabinet is disconnected on site, dismantled and remains with the previous owner in order to be able to continue operating the remaining systems on site. Only the frequency converters for the individual machines of the sorting plant are included in the scope of delivery. The concrete blocks under the sorting plant are also not included in the scope of delivery and remain with the previous owner on site. A viewing of the plant is possible by appointment after the prospective buyer has sent the complete company details (self-certification) and a subsequent credit check. We accept no liability for the technical details or any errors.

Condition: good (used), Functionality: fully functional, Heavy duty schredder 15 KWA. Was used for schredding paper waste. Delqjvzxize Iwdzjcg Price by request.

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: GBS 275/2040/2400/10, LUBO StarScreen GBS 275/2040/2400/10 Delq Iwdeqwddpszjcg 10 axles, S355 welded star axles Per axle, 33 ST. 250MM rigid and 33 ST. 262MM rigid Center-to-center distance shafts: 241.3

Condition: good (used), Year of construction: 2021, An almost new, complete and compact PMD sorting plant for plastics is for sale. The capacity is +/- 20 tons per day and the following materials are sorted out. Fractions: Non-ferrous metals, ferrous metals, hard plastics, soft plastics, glass, residual materials, etc. The steel structure, all conveyor belts, the control box, the compressor and the shredder date from 2021 and are still in excellent condition. The other machine parts were completely checked before installation. The shredder is equipped with a material compactor after operation, which pushes the waste into the rotor blades if necessary. The system consists of the following parts: - H01.01 Bruns Walking Floor Bunker, type AB 6022, year of manufacture 2022 - H01.02 Chain conveyor, dimensions 9,503 x 2,000 x 2984 mm - Z01.03 Schomberg shredder including new blade set, type ES90/135-D, year of construction 2020 - H01.04 Chain conveyor belt, dimensions 22,421 x 1,118 x 10,448 mm - F01.05 Ballistic separator, type STT 5000, year of construction 2007 - H02.01 Conveyor belt, dimensions 3,972 x 1,025 mm - H02.02 Conveyor belt, dimensions 1,3050 x 1,025 mm - H03.01 Conveyor belt to large Tomra, dimensions 5,557 x 2800 mm - F03.02 NIR Tomra, type NIR 2800, year of construction 2019 - F03.03 Tomra extractor hood - H03.04 Conveyor belt under blow-out hood, dimensions 10730 x 1000 mm - H03.05 Conveyor belt, dimensions 9,552 x 1,025 mm - H03.06 Conveyor belt, dimensions 9,802 x 1225 mm - F03.07 Magnetic belt - F03.08 NE Eddie Current, type SZNF150003, year of manufacture 2005 Dolq Iwotr D Tmsdzjcg - H03.09 Conveyor belt according to Eddie Current, dimensions 4,552 x 1,125 mm - H04.01 Conveyor belt according to Big Tomra, dimensions 6,302 x 1025 mm - H04.02 Chain conveyor according to small Tomra, dimensions 5,510 x 1,000 mm - F04.03 NIR Tomra separator, type NIR 1000, year of construction 2004 - F04.04 Tomra discharge hood - H04.05 Conveyor belt according to Tomra, dimensions 4,050 x 1,025 mm - Compressor, air dryer, expansion tank, etc. in container, type INV+55P, year of construction 2020 - Complete control cabinet for shredder and PMD system mounted in container - Complete steel construction - Concrete blocks Remark: The plant is located in Diemen (NL) is still fully assembled, connected to electricity and can be inspected in operation (without use of materials) on request. The plant is sold ex location, Diemen (NL). The dismantling and loading of the entire system as well as the clean delivery of the hall is at the risk and expense of the buyer. The technical documentation of the system and the components is only available in German and Dutch. An inspection of the system is possible by arrangement. We accept no liability for the technical details and any errors.

Year of construction: 2025, Condition: new, BTS-Bags for BTS-Plastic Foil Compactor / Sack Holder Dcelq Iwdsi Dbfpszeg BTS-Bags 240l („Made in Germany“) transparent and from high quality LDPE reclaim / regenerat 10 bags per roll / 10 rolls per box Plastic Film Compactor, Sack Holder, Foil Compaction Rack, Film Compaction Rack, Film Collection Pedestal, Plastc Film Foil disposal

Year of construction: 2009, Condition: good (used), Functionality: fully functional, machine/vehicle number: 101173, NFE/ FE separation system Dcslory Ugvoq Iwdzog

Year of construction: 2007, Condition: excellent (used), NIR sorting unit with a usable width of 2000 mm, complete with scanner, evaluator, acceleration belt, nozzle bar, separating apex and compensating hood Dcolq Iwjh Dia Aodzeg

Year of construction: 2005, Condition: reconditioned (used), Functionality: fully functional, How do you do? Djlouanqaeq Iwdzjcg We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: reconditioned (used), Sorting machine overhauled and ready for operation the price is depending on condition and equipment, software and hardware status 2008 - 2014 they like to come with material for trial sorting. the machines are for slag, shredder residue, residual fractions, cable, aluminum, Va, Ne about 12-120mm depending on the fraction 1-2 screen cuts should be made. Functionality induction and magnetizability, discharge with air approx. 3- 9 to throughput depending on material up to 40 to Delq Iwjt Rv Naedzocg

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 87118109, overall weight: 2,700 kg, type of input current: AC, power: 0.004 kW (0.01 HP), Equipment: documentation/manual, Sorter in working order complete length 2.77 m width 1.7 m Djlq Iwdsry Udaezecg height 0.9 m

Year of construction: 2006, Condition: excellent (used), NIR sorting unit with a usable width of 2000 mm, complete with scanner, evaluator, acceleration belt, nozzle bar, separating apex and compensating hood Dcjlq Iwoh Dimksdzsg

Year of construction: 2007, Condition: excellent (used), NIR sorting unit with a usable width of 1000 mm, complete with scanner, evaluator, acceleration belt, nozzle bar, separating apex and compensating hood Djlqsh Dih Ho Iwdzjcg