Used Sorting equipment for sale (48)

Condition: new, TC23072, OPTO Engineering, Bi-telecentric lens for 2/3" detectors Model: TC23072 Djlipotyx Swob Iuout Condition: New

Year of construction: 2015, Condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Duslipju R Rtbsb Iujt Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2007, Condition: excellent (used), Functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Djljpcf Etoipb Iusut Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: ready for operation (used), Archive photo Machine is currently being refurbished, delivery time 3 months Sorting machine for sorting out all non-ferrous and ferrous metals The machine can sort out ferrous metals separately, ferrous iron does not have to be separated out beforehand. Test sorting in the Habdaufkege process possible. The machine will be demonstrated in working order. The sale is without guarantee and warranty, commissioning possible worldwide for an additional charge. Dolipboiqk Aqo Iueut

Condition: good (used), 1 x ICON Engineering Crate Washer 3 phase Located in Scotland UKFM2-6026 Duolist Nfziepb Iujt

Year of construction: 2002, Condition: good (used), Functionality: fully functional, Wagensveld machine and steel construction – sorting cabin Broeckx Plastic Recycling B.V. This sorting cabin was put into use in 2002 for the manual sorting of industrial plastic waste. - Closed sorting cabin - Feed belt (slowed) - Sorting belt (4 speeds) - Waste discharge belt - 7 sorting bunkers 32.5 m3 - 1 dump bunker - 12 sorting places Delipb Ievbh Eleueut

Condition: used, TC23072, OPTO Engineering, Bi-telecentric lens for 2/3" detectors Model: TC23072 Djlipb Iotu U Eieusut Condition: Used

Condition: used, Overview of the equipment of a used sorting plant, year of construction 2009, with a sorting capacity of 25,000 t/year For sale is a complete used sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece sorting cabin with an integrated office (control room), external dimensions 14,200 x 11,400 x 4,350 / 8,170 mm (l x w x h), with 3 sorting belts and 10 sorting places, air-conditioned (heated). 1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S 1 piece infeed conveyor belt, right, no. 10, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor belt, centre, no. 11, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor, left, no. 12, dimensions 6,360 x 1,200 mm, drive power 3 kW 1 piece sorting belt, long, right, no. 15, dimensions 8,350 x 1,200 mm, drive power 2.2 kW 1 piece sorting belt, short, right, no. 17, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece sorting belt, long, centre, no. 14, dimensions 8,350 x 1,200 mm, drive power 2.2 kW 1 piece sorting belt, short, center, no. 16, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece sorting belt, left, no. 13, dimensions 5,360 x 1,200 mm, drive power 2.2 kW 1 piece reversing belt, below sorting belts 14 and 15, no. 18, dimensions 5,200 x 1,000 mm, drive power 2.2 kW 1 piece discharge belt (short), no. 17, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece discharge conveyor, no. 23, dimensions 8,300 x 1,000 mm, drive power 3.0 kW 1 piece bunker belt BB1 (from Hartner ballistic separator) dimensions 25,400 x 2,000 mm 1 piece bunker belt BB2, dimensions 24,000 x 2,000 mm 1 piece bunker belt BB3, dimensions 24.000 x 2.000 mm 1 piece bunker belt BB4, dimensions 11,000 x 2,000 mm 1 piece long discharge conveyor to the warehouse, No. 22, dimensions 28,200 x 1,000 mm, drive power 9.2 kW Technical data of the ventilation system for the sorting cabin: Dslipb Iju Tg Tyeujut Manufacturer VTS Ventus, Poland Type VS-120-R-H/S Min. air capacity 5,815 m³/hour Max. Air flow rate 17,610 m³/hour Connected load 108 kW Static pressure 837 Pa Stand-by pressure 600 Pa Filter designation VS 120 B.FLT F5, type EU5 Filter size 592 x 287 mm Remark: The plant is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without material input) if required. The sale of the plant takes place ex location, Germany. The dismantling and loading of the entire plant as well as the broom-clean handover of the hall is at the risk and expense of the buyer. Technical documentation for the system and the components is only available in German. An inspection of the plant is possible by arrangement. We do not accept any liability for the technical details or any errors.

Condition: used, No. 10012 Feed hopper Rema Used Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location Dslipb Iev N E Iyeusut

Condition: ready for operation (used), Sorting machine to sort out all metals NF and FE The machine can sort out Fe metals separately,Fe iron does not need to be sorted out before. Few operating hours, test sorting in the Habdaufkegeverfahren possible . The machine is demonstrated in working order. The sale is made without warranty and guarantee . commissioning worldwide against surcharge possible. Delismccu Dopb Iueut

Year of construction: 2019, operating hours: 1,200 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 6223, Kiverco Ps122 picking station for sale Machine has the following options - Overband Magnet - Wind shifter (option) - Emergency stop Pull Cord in picking cabin - Auto-Grease Dispensers Fitted to Each Bearing - Heated cabin - Hydraulic system for set up - Generator (optional) - Unbraked wheeled site axle Duelipev Ew N Ueb Iuet

Year of construction: 2011, operating hours: 2,500 h, Condition: good (used), machine/vehicle number: L10022-011, Redox Windsifter/ windsichter Hook container/ hacken lift vibrating feeder moveable separating drum 9095 mm total length 2642mm total working width adjustable legs westeria, nihot, walair Dslipb Iounag Deuout

Condition: good (used), metal detector S+S Delistu Nnuepb Iueut for sorting metal parts from a material flow. The material passes through a chute and the metal parts exit from another chute. chute inlet 70mm . sold with stand, height 2m.

Condition: used, For sale is a sorting plant for commercial waste, paper, cardboard, plastics etc., year of construction 2022, only 151 operating hours, with a sorting capacity of up to 20,000 tonnes/year, in two-shift operation. The plant consists of the following components: Djlipb Iju Tg S Asueut 1 piece feeding / dosing hopper with steel slat conveyor and a dosing drum, manufacturer Bollegraaf, type BDF-1200/2000 1 piece ascending conveyor between the feed hopper and the sorting cabin, manufactured as a troughed conveyor, manufacturer Lubo Systems, type TBM 2000 x 15000 1 piece sorting cabin, air-conditioned (heated), measuring 14,500 x 5,732 x 3,270 mm (l x w x h), with 4 sorting stations, 8 discharge chutes and 5 material bunkers underneath. The concrete blocks are not included in the scope of delivery of the sorting system. 1 piece sliding belt conveyor as sorting belt, manufacturer Bollegraaf, type HBGT 250/1400 * 15000 1 piece ventilation system for the sorting plant with an air capacity of 8,000 m³/hour, heated with 93.8 kW electrical heating power, manufacturer MANDIK. The area required to install the sorting system in its current configuration is at least 46 x 7.5 m (345 m²). The height of the sorting cabin including the ventilation pipes is 7,370 mm. Remark: The system is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without the use of materials) if required. The plant is sold ex works. The dismantling and loading of the entire system as well as the broom-clean handover of the hall is at the risk and expense of the buyer. The owner can provide sporadic logistical support during dismantling with forklift trucks, wheel loaders and excavators. Technical documentation for the system and the components (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) is only available in German. The existing control cabinet controls all of the customer's machines in two halls and is therefore not included in the scope of delivery of the sorting system. The control cabinet is disconnected on site, dismantled and remains with the previous owner in order to be able to continue operating the remaining systems on site. Only the frequency converters for the individual machines of the sorting plant are included in the scope of delivery. The concrete blocks under the sorting plant are also not included in the scope of delivery and remain with the previous owner on site. A viewing of the plant is possible by appointment after the prospective buyer has sent the complete company details (self-certification) and a subsequent credit check. We accept no liability for the technical details or any errors.

Condition: excellent (used), Functionality: fully functional, Year of construction: 2017, Used Hein Lehmann Double Deck Flip Flow Screener Year 2017 Screening Area 6 Metres x 1.2 Metres Double Deck c/w Poly Mats Top & Bottom Deck Complete With Chute and Framework Electric Motor c/w Prop Shaft Very Tidy Unit Djlipbju U N Ebs Iujut Weighs Approx 11 Tonne

Condition: good (used), Functionality: fully functional, Heavy duty schredder 15 KWA. Dujlipbsvzxizs Iust Was used for schredding paper waste. Price by request.

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: GBS 275/2040/2400/10, LUBO StarScreen GBS 275/2040/2400/10 Dujlipb Ioqwddpouet 10 axles, S355 welded star axles Per axle, 33 ST. 250MM rigid and 33 ST. 262MM rigid Center-to-center distance shafts: 241.3

Condition: good (used), Year of construction: 2021, An almost new, complete and compact PMD sorting plant for plastics is for sale. The capacity is +/- 20 tons per day and the following materials are sorted out. Fractions: Non-ferrous metals, ferrous metals, hard plastics, soft plastics, glass, residual materials, etc. The steel structure, all conveyor belts, the control box, the compressor and the shredder date from 2021 and are still in excellent condition. The other machine parts were completely checked before installation. The shredder is equipped with a material compactor after operation, which pushes the waste into the rotor blades if necessary. The system consists of the following parts: - H01.01 Bruns Walking Floor Bunker, type AB 6022, year of manufacture 2022 - H01.02 Chain conveyor, dimensions 9,503 x 2,000 x 2984 mm - Z01.03 Schomberg shredder including new blade set, type ES90/135-D, year of construction 2020 - H01.04 Chain conveyor belt, dimensions 22,421 x 1,118 x 10,448 mm - F01.05 Ballistic separator, type STT 5000, year of construction 2007 - H02.01 Conveyor belt, dimensions 3,972 x 1,025 mm - H02.02 Conveyor belt, dimensions 1,3050 x 1,025 mm - H03.01 Conveyor belt to large Tomra, dimensions 5,557 x 2800 mm - F03.02 NIR Tomra, type NIR 2800, year of construction 2019 - F03.03 Tomra extractor hood - H03.04 Conveyor belt under blow-out hood, dimensions 10730 x 1000 mm - H03.05 Conveyor belt, dimensions 9,552 x 1,025 mm - H03.06 Conveyor belt, dimensions 9,802 x 1225 mm - F03.07 Magnetic belt - F03.08 NE Eddie Current, type SZNF150003, year of manufacture 2005 - H03.09 Conveyor belt according to Eddie Current, dimensions 4,552 x 1,125 mm - H04.01 Conveyor belt according to Big Tomra, dimensions 6,302 x 1025 mm - H04.02 Chain conveyor according to small Tomra, dimensions 5,510 x 1,000 mm - F04.03 NIR Tomra separator, type NIR 1000, year of construction 2004 - F04.04 Tomra discharge hood Duelistr D Tmopb Iuot - H04.05 Conveyor belt according to Tomra, dimensions 4,050 x 1,025 mm - Compressor, air dryer, expansion tank, etc. in container, type INV+55P, year of construction 2020 - Complete control cabinet for shredder and PMD system mounted in container - Complete steel construction - Concrete blocks Remark: The plant is located in Diemen (NL) is still fully assembled, connected to electricity and can be inspected in operation (without use of materials) on request. The plant is sold ex location, Diemen (NL). The dismantling and loading of the entire system as well as the clean delivery of the hall is at the risk and expense of the buyer. The technical documentation of the system and the components is only available in German and Dutch. An inspection of the system is possible by arrangement. We accept no liability for the technical details and any errors.

Year of construction: 2018, Condition: as good as new (ex-display), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation Djliodzqxbepb Iuout + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 420mm B: 280mm H: 380mm Inlet: 365x80mm Drum: Ø 220x400mm

Year of construction: 2025, Condition: new, BTS-Bags for BTS-Plastic Foil Compactor / Sack Holder BTS-Bags 240l („Made in Germany“) transparent and from high quality LDPE reclaim / regenerat 10 bags per roll / 10 rolls per box Plastic Film Compactor, Sack Holder, Foil Compaction Rack, Film Compaction Rack, Film Collection Pedestal, Plastc Film Foil disposal Dujlipb Iji Dbfpjust

Year of construction: 2009, Condition: good (used), Functionality: fully functional, machine/vehicle number: 101173, NFE/ FE separation system Delery Ugvjipb Iuout

Year of construction: 2007, Condition: excellent (used), NIR sorting unit with a usable width of 2000 mm, complete with scanner, evaluator, acceleration belt, nozzle bar, separating apex and compensating hood Duolipoh Dia Asb Iuet

Year of construction: 2018, Condition: as good as new (ex-display), machine/vehicle number: TMA500x600mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit Djlipodzqw Asb Iuout + Pillow block units Dimensions: L: 800mm B: 800mm H: 820mm Inlet: 600x250mm Drum: Ø 500x600mm

Year of construction: 2018, Condition: like new (used), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 420mm B: 280mm H: 380mm Inlet: 365x80mm Drum: Ø 220x400mm Dolijc Tnh Dspb Iusut

Year of construction: 2019, Condition: excellent (used), Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator Overband plate magnet Execution in VA 1.4301 tightly welded NEODYMIUM MAGNETIC CORE, very adhesive! Dimensions: Duslipshuphreb Iuot 620x520x200mm 4 - piece M16 eyebolts on the back This lifting magnet was used by one of our customers as a "police magnet" in the meat processing industry. The price mentioned refers to 1 piece. Currently only 1 piece available from stock! All information without guarantee, only while stocks last! Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded 420x420x200mm 420x420x250mm 620x420x200mm 620x520x200mm 820x520x200mm 820x520x250mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible...