Used special purpose machines for sale (140)

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Fpjdpjzc N H Djfx Aanjp Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Year of construction: 2024, condition: excellent (used), The ZLC series cold chamber die casting machines have been developed based on over 12 years of experience and are widely used for producing zinc or brass alloy components in sectors such as automotive, electrical engineering, electronics, toys, household appliances, and computers. These cold chamber die casting machines are equipped with high-quality imported hydraulic components, a robust machine frame, tie bars made from high-tensile alloy steel, and industry-specific control systems. Key advantages include advanced design, precision manufacturing, rapid response, easy operation, reliability, safety, and low energy consumption. The machine comprises a control system, hydraulic system, lubrication system, cooling system, clamping system, injection system, machine frame, safety door, and more. Its primary function is to extract a precise quantity of molten metal from a separate furnace, pour it into the injection sleeve, and, under high pressure, inject the completely molten alloy into a mold mounted on the platen. The die closes and the high pressure is maintained until the alloy fully solidifies inside the mold. Fjdpfx Aoy A Hnysanopp

Year of construction: 1989, condition: used, functionality: fully functional, machine/vehicle number: BDT019/1720, TRÜTZSCHLER Blendomat - Type BDT019/1720 - Year of manufacture: 1989 - Dimensions: length 10 m, width 3 (2) m, height 3 m - incl. control unit Fpedpfxewtlzge Aansp - Cutting length: 60 mm - Additional roller set for cutting length 38 mm Machine is still operational and installed; inspection on-site possible. Buyer is responsible for dismantling and collection. Collection in 14712 Premnitz Subject to prior sale Enquiries by email only, please.

Condition: new, Grundfos MTS20-80 R46 DQ – Industrial Screw Pump – 7.5 kW Original Grundfos MTS20-80 R46 DQ industrial screw pump, complete with a 7.5 kW IE3 electric motor. New and unused, supplied in original transport packaging. Technical Specifications: * Manufacturer: Grundfos * Model: MTS20-80 R46-DQ-T * Product number: 99186029 * Pump type: Industrial Screw Pump * Motor power: 7.5 kW / 10 HP * Voltage: 3 × 380–415 V * Frequency: 50 Hz * Motor speed: 2,910–2,920 rpm * Efficiency class: IE3 * Protection class: IP55 Fedpfxs Afn Nre Aanopp * Weight: 102 kg (including packaging) * Condition: New / Unused Suitable for industrial machinery, coolant circulation, metalworking equipment, and lubrication systems. Stock availability: 10 units. Location: Botlek Rotterdam, The Netherlands Delivery terms: EXW (Ex Works) Shipping can be arranged upon request. Please contact us for further information or a quotation.

Condition: good (used), Year of construction: 2026, functionality: fully functional, total width: 1,250 mm, total length: 2,000 mm, total height: 3,200 mm, 2 sets of 3 fans, previously used for drying thick veneer sheets. Power consumption: max. 5 kW per set of 3 fans. Fpsdpfx Aaozat Hcjnep

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Fpedpfx Aszr T Dkoansp Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Condition: used, Year of construction: 2014, functionality: fully functional, pressure: 8 bar, temperature: 20 °C, type of input current: three-phase, input voltage: 400 V, overall weight: 1,250 kg, usable tank capacity: 90 l, rotational speed (max.): 758 rpm, Equipment: rotational speed infinitely variable, We are offering this used RESPECTA DB13A/20-30L mixing and stirring unit, year of manufacture 2014. Manufacturer: RESPECTA Model: DB13A/20-30L Year: 2014 Condition: used Machine type: Mixing and Stirring Unit Weight: 1,250 kg Voltage: 400 V Frequency: 50 Hz CE safety standards The machine is in perfect working condition. This machine can also be purchased together with other units for a complete production line. Technical Details - Mixing Unit: The mixing unit is designed for blending dry fillers with liquids. Maximum filler particle size: 2mm Mixture output rate: approx. 20 – 30 l/min Mixing tool: single-flight mixing screw, left-handed, equipped with wear-protection coating, robust cylinder design with high surface hardness Drive: 3-phase motor, 4 kW – 379 rpm, 400V / 50 Hz Speed range: adjustable from 0 to 758 rpm Fpsdpfxoyxg Dgj Aansp Screw overload protection: set at 80% of the rated current Quantity adjustment: potentiometer, stepless, without altering the mixing recipe Technical Details - Binder Premixer: Dynamic mixing of pure liquids without any solid content. Mixing performance: max. 5 l/min Mixing tool: single-flight mixing screw, left-handed System materials: stainless steel, Viton, PTFE Drive: three-phase motor, 0.55 kW, 2830 rpm, 230-400 V / 50 Hz Pressure monitoring: S-11 pressure transmitter, 0-4 bar G ½" Pressure display: control terminal at switch cabinet Technical Details - Filler Dosing System: Four dosing systems for volumetric dosing of free-flowing, non-bridging dry fillers. The dosing units are interchangeable with identical units and secured with quick-release clamps. All dosing units are equipped with level sensors. For fine fillers, a horizontal agitator is integrated in dosing unit 2 to prevent bridge formation as much as possible. Fillers with max. grain size 2mm Dosing rate: approx. 2 – 10 l/min Dosing tool: single-flight spiral, left-handed Dosing drive: geared motor, 0.75 kW – 91 rpm, 230-400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 182 rpm Quantity adjustment and display: control terminal at switch cabinet Storage vessel Capacity: approx. 90 l (4x) Technical Details - Resin Dosing System: Pump unit for volumetric dosing of pure liquids without admixtures of solid or reactive substances. Dosing rate: approx. 400 – 2000 ml/min Viscosity at 20°C: approx. 2,000 mPas Pump type: gear pump Pump pressure: max. permitted 8 bar Drive: three-phase geared motor, 0.37 kW – 291 rpm, 230–400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 582 rpm Quantity adjustment and display: control terminal at switch cabinet Dismantling and removal at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2020, table length: 2,270 mm, table width: 1,600 mm, working length: 2,270 mm, working width: 1,600 mm, travel distance X-axis: 2,270 mm, travel distance Y-axis: 1,600 mm, cutting speed: 60,000 mm/min, positioning accuracy: 0.005 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 3,990 mm, total width: 2,340 mm, total height: 1,600 mm, Equipment: cooling unit, dust extraction, fume extraction, We offer this used eurolaser LCS G3 XL-1600 laser cutting machine, year of manufacture 2020. System type: LCS G3 XL-1600 Serial number: 1308S8364P Year of manufacture: 2020 - Voltage: 400V/50Hz - Operating temperature: +10° to 32°C - Working area: 2,270 x 1,600 mm - Maximum material width: 2,350 mm, unlimited length - Cutting speed: 1–1000 mm/s - Axial acceleration up to 9.3 m/s² - Measuring system accuracy: 0.005 mm Fedpfxeyu N H Uj Aanjpp - Servo-controlled DC motors - Dimensions: 3990 x 2340 x 1600 mm - Hardware interface: RS 232C - Software: HPGL - LCD control panel - Two lenses – 5" and 7.5" - Laser Scout Connect (LS-CON) cutting software: Includes post-processor for laser system control and LaserScout PLANNER module for cutting time calculation. - Watchdog (E-WD): Monitoring and remote diagnostics of key system functions in real time. - LaserScout POSITION+ (LS-POS+): POSITION is a software package for working with a camera to recognize reference marks. The package also includes a camera and the Planner for cutting time calculation. - Cooling unit (CU-450): Water-to-air closed-loop cooling unit Ambient temperature: +10° to +32°C Voltage: 400V, 3~, 50Hz - Top extraction (EU-015-1): 1 x 1.5 kW vacuum motor Automatic voltage protection Voltage: 400V, 3~, 50Hz - Extraction unit (EU-030-2): 2 x 3.0 kW vacuum motors Automatic voltage protection Voltage: 400V, 3~, 50Hz - Raster cutting table (RP-XL32): Black anodized perforated table - PC, 21” monitor If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2010, "URBAN" welding and cleaning line, consisting of Urban welding machine type AKS 6610/4-30/45 with Urban corner cleat machine type SV 530/B and Urban transport unit type TBA 30/48-HQ. Fpodpoy Iy Rxofx Aansp

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Fpjdpfx Aozd Unbsansp Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, operating hours: 158 h, Equipment: documentation/manual, Filter Purifier ARX-2000 - USED - 157 HOURS AND 58 MINUTES Arx-2000 air treatment system is an air purifier filter for Co2 laser machine; it is sized for MT-1613 , MT-2513 and CO2 Conveyor Laser Machine Equipped with practical wheels. Our Arx systems greatly reduce pollutants and odors, providing excellent comfort to the working microclimate by having a low noise impact, thus having an efficient and effective air treatment system. The Arx-2000 laser machine air purifier filter is equipped with Glass Fiber and Polyester filtration system with the possibility of adding 12 Cylindrical Activated Carbon, Rigid Pocket Absolute Filters. With the touch screen controller you can easily turn the purifier on or off, check filter status and hours of operation. Fpodpet Ua Arefx Aansp Flow rate 2000 mc/h Motor Power 2200 W Power Supply Voltage 220 V Frequency 50 Hz Inlet connection 2 of 150 mm Outlet connection 200 mm Filters Fiber, Polyester, (Carbons and Absolute optional)

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: 04.04.40, Technical characteristics: # Payload Capacity: Free conveyor, 350 mm width / 250 mm height # Tank capacity: 1 tank, 250 L # Washing chamber capacity: spraying nozzles in all directions in 3 consecutive steps # Conveyor speed: approx. 0.4 m/min # Eco-friendly operation: Solvent-free, uses water-based detergents. # Average load weight approx. 25 kg; maximum 50 kg # Mechanical weight: 4500 Kg Electrical Equipment # Operating voltage: 400Vx3 # Connected power: 60 kW / rated current 65A Dimensions # Machine dimensions (L×W×H): 5000 × 2000 × 1700 mm Equipment consists of: Fjdpfxjxx N Sds Aanepp # Main machine, manual loading/unloading (Loading height approx. 930 mm) Machine status: WORKING

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. These are two single-station forming systems from the premium manufacturer FRIMO. Fodpezrg I Ajfx Aanjpp They were used in the automotive sector and were in production until recently. The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, controller model: Simatic Mobile Panel 277 10", number of cylinders: 4, lifting height: 1,500 mm, pressing force: 250 t, operating pressure: 245 bar, main lifting speed: 290 mm/min, pressing speed: 400 mm/s, control type: PLC-controlled, Equipment: 3rd hydraulic function, hydraulics, Here you have the unique opportunity to acquire a thermoforming press from the premium manufacturer FRIMO. The press is in used, very good condition, has no outstanding maintenance requirements, and is available immediately. The press can also be modified and adapted to meet new requirements according to customer specifications. Please feel free to contact us regarding your planned project, and we will prepare a customized offer for you. The press is currently located in Sontra (Germany) and can be inspected by arrangement. The press is currently partially disassembled (platform, hydraulics, attachments, etc.) and can be completely reassembled if required. The press was last used in a multi-stage production line; the other equipment is also largely still available. The image (overview) shows everything schematically; this advertisement primarily concerns the 250t thermoforming press. Fpodpfx Aaeztm Ufsnjp If we have piqued your interest, please do not hesitate to contact us at any time.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 101, Eddy current tester with automatic shaft inspection Fpodpfx Aox Ezkhoanjp

Condition: used, Bosch Rexroth Linear Cylinder Machine Fodpohufcljfx Aanepp This machine is a custom-made unit for Bosch, intended for internal use in its production process. The machine includes: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-phase synchronous PM motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of manufacture 2016 Condition: used Complete factory closure, large selection of storage platforms, pallet racking, shelving units, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, Nova Gas Industry – Nitrogen 5.0 at an Unbeatable Price Nova Gas Industry offers modern and cost-effective solutions for on-site production of Nitrogen 5.0 and customized gas mixtures. Our systems combine the highest gas quality with maximum operational efficiency, providing an outstanding price-performance ratio. With more than 200 successfully installed systems across Europe and Asia, we have extensive experience in the design, engineering, and implementation of nitrogen generation systems for a wide range of industrial applications. Our systems are built with high-quality components, robust engineering, and a maintenance-friendly design. This helps reduce maintenance requirements and ensures high system availability for many years. Fpsdpexrcauofx Aanep Another key advantage is energy efficiency. Thanks to an optimized air factor and modern PSA technology, nitrogen can be produced reliably and economically directly at the customer’s site. This significantly reduces dependence on external gas deliveries and the associated transportation, logistics, and storage costs. An intelligent monitoring system enables continuous monitoring of all important operating parameters. System status, gas purity, pressure, and other relevant process data can be monitored at any time. This keeps your nitrogen production under control and allows you to respond quickly to any deviations. Every system is individually designed according to the customer’s requirements – from gas capacity and purity to operating pressure and specific operating conditions. Nitrogen 5.0 or Gas Mixtures – Maximum Quality, Minimum Operating Costs Nova Gas Industry provides high-purity Nitrogen 5.0 as well as customized gas mixture solutions for demanding industrial applications, particularly in laser cutting, metal processing, electronics, food processing, and manufacturing. Through energy-efficient system design and modern technologies, significant energy savings can be achieved depending on the application and system configuration. Our customers benefit from: * High-purity Nitrogen up to 99.999% * Low energy consumption * Maintenance-friendly system design * High system availability * Customized engineering and project solutions * Attractive investment and operating costs Nova Gas Industry – More than 200 successfully installed systems in Europe and Asia. Nitrogen 5.0 and gas mixture solutions – reliable, efficient, and economical.

Condition: ready for operation (used), Switch Testing Device - 3x test stations for appliance switch testing - Voltage: 0–600V AC / DC - Current rating: max. 40A - Operation of test switches via pneumatic cylinders - Testing with resistive and inductive loads according to EN 61058 (VDE 0630) - 1x thermal chamber (oven) for testing at ambient temperatures up to 125°C - Testing of appliance switches with rated data 250Vac / 16(4)A / 125°C Buyer responsible for disassembly! Fpsdpex I Ef Uofx Aanop

Year of construction: 2018, condition: ready for operation (used), Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement. Fsdpfx Aajx Hff Ejnspp

Condition: used, SKF 23996 CA/W33 Spherical Roller Bearings – Used – Excellent Condition – 2 pcs Available: 2 SKF spherical roller bearings, model 23996 CA/W33, sourced from an industrial plant and fully operational. These are high-quality components, suitable for heavy-duty applications and ideal as immediate replacement parts. Technical Specifications: - Brand: SKF Fsdjyu Rm Aepfx Aanjpp - Model: 23996 CA/W33 - Type: Spherical Roller Bearing - Cage: CA (solid brass) - Lubrication: W33 (lubrication groove and holes) - High radial and axial load capacity Suitable for: - Industrial gearboxes - Hoisting/lifting systems - Steel plants and cement works - Heavy-duty machinery - Pumping and snowmaking installations Condition: - Used, but in excellent working condition - Removed from a functioning plant - Raceways and rollers in very good shape (see photos) - Protective grease applied - No significant oxidation or visible damage - Stored in original SKF crate Ready for installation or use as a strategic spare part Scope of Supply: - Complete bearings - Original SKF wooden crate - Internal protective packaging

Condition: used, Year of construction: 1973, machine/vehicle number: 2007, Short description: - Including splicing table - Machine documentation available Last intended use (Jan. 2024): Fedpfx Asw Rlnaoanepp - Application-based product testing of polyester slitting converter cable assortments - For assessing running characteristics under constant machine settings - 1.9-6.7 dtex - 2x80ktex-2x120ktex - Collection in can - Accessories/spare parts partially available The machine has been dismantled and stored, but can be inspected on site. Collection only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Enquiries in writing only, please.

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Fpjdpfx Aowhdnheansp Resolution: 0.0015% Linearity:

Year of construction: 2010, condition: good (used), functionality: not functional, 4-Roll Rubber Calender, 14'' x 42'', L-type, for the production of inner linear and fabric coatings. It consists of a drive unit, TCUs, cooling rolls, and conveyor belts. Fpsdpfjzt Nkijx Aansp

Year of construction: 2004, condition: used, Hollinger 4-point welding machine type ASP-L Fpodpsylingsfx Aansp

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: - 2x12 spinning positions - SE9 boxes - Corolab - 1 start-up trolley - SRZ (precision winding) Fsdew Rldzspfx Aanspp - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.