Used Pellets for sale (277)

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Hedpfeynnlijx Andonu Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Hnodpfx Anozw Apgedou Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹) Hnodpfjz I Tktsx Andju

Year of construction: 2019, operating hours: 5,600 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: DRPL/LP29, Equipment: CE marking, PELLET PRODUCTION LINE – COMERC – CAPACITY 2 T/H Pellet production line with a capacity of 2 t/h, line length 25 m. Raw material: sawdust (spruce, pine, larch). Operating hours: 5600 h. The complete line includes: Sawdust hopper – 80 m³ Screw conveyor from the hopper – length 6 m Sawdust bucket elevator – length 7 m Buffer tank – 1 m³ for the humidification station Humidification and moisture stabilization station Sawdust bucket elevator – length 7 m Granulator buffer tank – 1.5 m³ Screw conveyor to the granulator – length 2 m RMP 520 Munch granulator Acid-resistant bucket elevator – length 8.5 m Gallen Cuntelfloor pellet cooler Pellet sifter Bucket elevator – length 8.5 m Finished pellet storage tank – 3 t Manual bagging machine – 2–3 people, up to 20 t/shift Hnsdpfxoz Hw Ume Andeu JKF 15 kW fan for aspiration Aspiration system – extraction from the entire line Cyclone – diameter 1 m Control cabinets – complete Control, measurement and actuation equipment, moisture sensors (2 units) Explosion-proof early spark detection and extinguishing system Visual process overview to be implemented along with the control panel Installed power 217 kW We can send more photos and specifications to interested parties via email. The line is in working condition. Disassembly of the line is the responsibility of the seller. Collection and transportation of the machine is the responsibility of the buyer. We also offer assistance with reassembly, commissioning, and service support. On-site inspection is possible.

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Hnsdpfx Aezrvh Eondeu Power: 195 kW Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2003, operating hours: 12,000 h, functionality: fully functional, ASCO BP407 – Automatic dry ice production machine for blocks, slices, and pellets Year of manufacture 2003 | 12,635 operating hours | Fully functional | Includes documentation and maintenance history For sale at DrDryice: an ASCO BP407 automatic dry ice production machine for the production of dry ice blocks, slices, and pellets. The machine is used, fully functional, and in good working order. The machine can produce slices in various thicknesses and pellets of 3 mm and 16 mm. The molds for the different product formats are integrated and are selected via the touchscreen. Manually changing the molds is therefore not necessary. Stated production capacity: up to approximately 400 kg per hour, depending on the chosen end product, block thickness, or pellet size. The previous user reported an actual production of 250–300 kg per hour. These are the capacity figures from the existing advertisement; the actual production depends on the operating conditions and product settings. maschinensucher.at Maintenance and operating hours The last maintenance service by ASCO was performed in December 2016, with a meter reading of 12,032 hours. After this maintenance service, the machine has only operated for another 603 hours. Total operating hours: 12,032 + 603 = 12,635 hours. The pump and cylinder have been replaced in the past. Documentation is available with the machine, including technical manuals and service reports. Used Machines The machine is offered with the available maintenance history and associated additional parts and spare parts. Origin and reason for sale The machine comes from a large industrial factory that has invested in a new production line and has switched to a different machine manufacturer. Due to this change in the production setup, the ASCO BP407 has been taken out of production and is now available for sale. This is a used, fully functional machine. Hnjdpfxey R I Uqe Andou Worldwide Shipping Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST 630/150 die and rolls Force Feeder with a 0.9KW motor Currently undergoing full refurbishment - Seals &bearings included Hjdpfov Sq Rljx Andenu Colour - customers option Customer to arrange collection and freight

Year of construction: 2005, operating hours: 20,000 h, condition: used, functionality: fully functional, MEWA UG1008 MS industrial granulator – 160 kW For sale: an industrial MEWA UG1008 MS granulator designed for the secondary shredding and granulation of various pre-shredded industrial and secondary raw materials. This is a robust, German-made MEWA unit designed for continuous industrial operation. The machine is equipped with a powerful 160 kW ABB electric motor, a hydraulic material clamping mechanism, a perforated screen, and electrical control cabinets. The unit can be used in various waste and secondary raw material processing lines, depending on the installed screen and the specific material being processed. MEWA UG1008 type granulators are used, among other things, for the granulation of pre-shredded tires, RDF/SRF alternative fuels, and other materials. Key technical data: Manufacturer: MEWA Model: UG1008 MS Type: industrial granulator Hodoz Duuxjpfx Andenu Main motor: ABB Motor power: 160 kW Power supply: 400 V / 50 Hz Rotor diameter: approx. 800 mm Cutting chamber dimensions: approx. 1000 × 800 mm Rotor blades: 25 pcs. Stator blades: 5 pcs. Hydraulic clamping Replaceable perforated screen Electrical control cabinets Total unit weight: approx. 18 t (depending on the specific configuration) These technical parameters correspond to publicly available MEWA UG1008/UG1008 MS specifications. Applications The granulator can be adapted for: pre-shredded tires; RDF/SRF alternative fuels; plastic waste; various industrial wastes; other secondary raw materials that require secondary shredding. The final fraction and output depend on the type of material, its fraction, moisture content, density, the installed screen, and the condition of the blades. Reference MEWA UG1008 technical descriptions indicate an output of up to 2.0–4.5 t/h for pre-shredded tires or alternative fuels; however, this is not a guaranteed performance for your specific machine – it must be evaluated based on the actual material and configuration. Configuration Based on the inspection, the configuration includes: MEWA granulator; 160 kW ABB electric motor; hydraulic system; perforated screen; electrical control cabinets; cables and other related equipment. The machine is sold in the configuration as shown in the photos.

Year of construction: 2022, condition: good (used), PLP MT100 Paddle coating machine 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor Hsdpfxoz I Dtfs Andonu

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. In addition, there is a lifting beam on the press for changing rollers and dies. The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. Hnodpez I Tzxjfx Andeu The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. This compact table-top machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed in via a pair of infeed rollers and then granulated by a fixed counter-blade and a rotating impact blade. The infeed and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter-blade can be precisely adjusted. The desired speed can be regulated on the control panel. Technical data: Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of manufacture: 2009 Machine number: 9310 31 09 Connected power: 0.5 kW Electrical connection: 230 V / 50 Hz Rated current according to nameplate: 6 A Dimensions: approx. 290 × 500 × 540 mm Weight: approx. 50 kg Equipment and features: Pair of infeed rollers Guide piece Fixed counter-blade Rotating impact blade Adjustable infeed speed Hsdpfez Rmvvsx Andonu Transparent protective cover Main and safety switch Compact design as a table-top machine Inspection possible by prior arrangement.

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Hnsdpfx Asz Rwimendou Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Hsdpfx Ajz Ixc Ijndonu

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: - Screen: 6 mm - Motor: 2 x 90 kW - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 - Pressing capacity: up to approx. 3–5 t/h Hnsdpezryyrefx Andeu

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Hsdoi Akrkopfx Andsnu Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Capacity - 2t/h Pellet press - ZEPPI 132 Kw Hnjdoz I S Svspfx Andsu Year - 2014 Exellet condition !

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 26/2632, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1. Pelletizing press, brand: Paladin 1600-210 Internal diameter of the die: 850 mm Die surface: 210 mm The press is equipped with 2 motors, each with 90 kW and a speed of 1500 rpm. The press door is made of stainless steel and has an overload valve. 2. Roll press with 2 rolls on the press, refurbished with a drilled or ribbed design. The press is complete with a die lifting device and tools. New rear plate for the 2 rolls. The press has been completely refurbished and fitted with new bearings and wear parts, such as front and rear sliders, die adjustment ring, etc. Hedpfx Ajq U R N Tondenu Also includes new V-belts and toothed belt. All safety features will be taken into account, and appropriate switches will be installed. Friction protection, door switch, and inspection hatches will be mounted. Refurbished pump unit for friction and V-belt tension. Note: Conditioner on the press is an optional extra.

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Hnodoz Rz Dnepfx Andsu Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Condition: used, Year of construction: 2024, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, overall weight: 4,500 kg, input voltage: 400 V, Equipment: documentation/manual, For sale is a Himel / Gama pellet press for straw / hay / alfalfa, optimized! According to the manufacturer, it has a capacity of 700 - 1200 tons per hour, depending on the biomass! The press was installed as a temporary solution because identical models were undergoing a complete overhaul. Hedpfx Anozzf D Iodjnu

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 Hsdpfjyrhd Tjx Andjnu If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of: Hodpfx Aez I Tm Ujndenu  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Year of construction: 1984, condition: refurbished (used), functionality: fully functional, drive type: V-snaren, Motor: 55 kW - 1500 RPM Hodpfx Ajz Arh Nsndenu Tread die: 85 mm Die diameter: 362 mm Equipped with a cut-off knife on the door Weight: 1440 kg 1 year warranty

Condition: used, Year of construction: 1994, operating hours: 392 h, functionality: limited functionality, machine/vehicle number: 1115, type of input current: three-phase, total height: 150 mm, total length: 2,200 mm, total width: 900 mm, overall weight: 1,800 kg, power: 11 kW (14.96 HP), input voltage: 380 V, Equipment: documentation/manual, Brand: Pawert Type: I-40/85 Hnodpfx Ajzyau Esndju Year of construction: 1994 Capacity: 150 kg/hour Briquette dimensions: Ø 40 mm Motor: 11 kW Weight: 1800 Including feed screw and discharge chute.

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Hnjdpfxsztaahe Andeu Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W Hnsdeyw I Hmspfx Andou • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.