Condition: new, Year of construction: 2025, power: 5 kW (6.80 HP), SAPI Premium 200-liter pressure blast machine with cyclone cleaner and abrasive vacuum for abrasive treatment. This blasting system provides a cost-effective, highly economical, and effective solution for open blasting work with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment. The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve. The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package. This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling. The scope of delivery includes: SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar High-performance 1 1/4" water separator, permanently installed on the unit SAPI safety shut-off device Cyclone cleaner for abrasive preparation with lifting device Abrasive sieve (inserted sieve in the blast pot hopper) Filling hopper 500x500x380 mm 4-meter connecting hose from the filling hopper to the cyclone cleaner 3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container Folq Ecqjwc Rcnsysgb 10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)

Condition: good (used), Year of construction: 2012, COGEIM STL A 2200 / 4TR Mesh wire shotblasting machine for stone Type: Wire mesh Max. width of workpiece: 2200 mm Max. height of workpiece: 400 mm Max. workpiece weight: kg/m Machine oppening width: mm Nr. Of turbines: 4 Turbine type: 380 Turbine wheel diameter: 380 mm Power of turbine: kW Max. turbine flow: 155 kg/min Transport speed: Cleaner type: airwash Folq Esr Nbyzocqyjgb Foundation: needed Housing protection: Filter unit: Included - bag type Machine is selling in current condition. Refurbishment is also possible!

Condition: like new (used), Laser engraving, laser marking, laser welding, laser structuring, etc. 2x Ø 50 mm available on the roof side Mobile storage device Very quiet operation Simple filter handling, modular design Operating elements on the front Fgslq Ecorypcdoqyjb Powder-coated, robust housing Installation of extraction arms Volume flow control: stepless adjustment of the suction power Particle filter occupancy indicator: visual signaling SUB D9 interface: standard equipment, remote I/O, operating message, 100% filter Dimensions W x D x H: approx. 1400 x 1200 x 2000 mm Weight: approx. 35 kg

Year of construction: 2020, Condition: as good as new (ex-display), Kannegiesser belt conveyor belt conveyor GF 1250-680-600 RA1816 Kannegiesser conveyor belt is from 2020 and is in mint (used) condition. The belt conveyor has a motor drive from Bauer with frequency converter to regulate the conveyor speed. The pictured supports are included in the delivery. Technical data: Conveyor length (NL): 1250 mm Frame width (NB): approx. 680 mm Belt width (GuB): 600 mm Overall height(BH): 800 - 1130 mm ascending Number of support feet: 2 pieces Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0,37 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 07/2020 Special feature / accessories: 1x Bauer gear emtor with frequency converter 2x return pulley cover Optionally available: Side guides one and both sides Folq Eewblk Decqyegb All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Extraction system for dry grinding or similar dust-generating work. Very good condition, virtually unused. All documentation and a Euro pallet with filter material included. Stored ready for loading, available for immediate delivery. Approx. 3 m high. The system is photographed lying down... Fgslq Ecjwa Szmeqyeb

Year of construction: 2008, Condition: good (used), Functionality: fully functional, All details please see attached layout Fgelov Tkzyjq Ecqysb

Condition: new, Year of construction: 2025, Functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Fslq Eewc Nrnscqyjgb Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 125 L Max. batch weight: 300 kg Fgolq Ecqjvpgr Tjyjb Max. component weight: 10 kg Compartment diameter: 700 mm Compartment width: 875 mm Nr. Of turbines: 1 Power of turbine: 5,5 kW Max. turbine flow: 75 kg/min Cleaner type: air Foundation: no Housing protection: Mn + rubber Filtering unit: YES 2.000 m3/h Max. installed power: app. 11,5 kW

Year of construction: 2023, Condition: new, Powder container with fluidization Powder container made of stainless steel / steel. Universal connection to the pump FI20. Connection to the powder hose 8mm - quick coupling. Fslq Ecscr U Rroqyjgb

Condition: new, Year of construction: 2025, Functionality: fully functional, total height: 2,970 mm, total width: 930 mm, total length: 930 mm, overall weight: 250 kg, input voltage: 400 V, suction capacity: 1,200 m³/h, LTA (JUNKER Group) mechanical dust filtration systems capture and remove dust and fumes in industrial applications. They use cartridge or bag filters to reliably capture even the finest particles. Thanks to automatic filter cleaning, they offer consistently high separation efficiency and are available as mobile or stationary systems. Fgjlq Ecjv S E Ncsqyob

Condition: new, 🚀 Modular powder coating systems with bar transport system Our modern painting systems with bar transfer systems offer maximum flexibility with minimal space and energy consumption. All process steps – from pretreatment to oven drying – can be carried out in a single, continuous line. 💡 Ideal for the following applications: Powder coating and wet painting Sandblasting Chemical pretreatment Baking and cooling 🔁 Intelligent transfer system The transport system moves the workpieces safely and efficiently through all stations of the system: Manually or motor-operated Optionally with a lifting device for heavy workpieces Parking stations for buffering and intermediate storage Compatible with automatic paint booths and walk-in booths The movement is fully automated with a continuously variable drive that enables precise control of cycle times. 🏗️ Structure & Components: Monorail conveyors for longitudinal movement Cross-guide units for direction changes Mobile carriages with product holders Load-bearing steel structure for continuous loads Control via control panel with speed control ⚙️ Efficiency through sophisticated design The system allows contactless handling – the workpiece is suspended at the loading station and remains in the same position until removed. This ensures consistently high quality and minimizes handling times. 🔧 Lifting device for loading and unloading The integrated bar lifting device enables ergonomic and safe working with heavy parts. Operators can precisely position the lifting bar at the push of a button (raising/lowering) – ideal for large components. ✅ Your benefits at a glance: Fully automated material flow For workpieces of any size and weight Reduced space requirements Fgjlqsdy Ezdo Ecqysb Minimal maintenance, maximum service life High energy efficiency Adaptable to your individual requirements This solution is perfect for modern coating processes where flexibility, ergonomics, and efficiency are paramount. Our experienced engineering teams will adapt the system precisely to your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Condition: used, Year of construction: 2004, Functionality: fully functional, total height: 2,500 mm, total length: 23,224 mm, total width: 950 mm, Drum system Felq Ecqjv S Aq Deyegb

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Fgolqjwc Afhj Ecqyeb Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Nr. Of turbines: 2 Power of turbine: 11 kW Max. turbine flow: kg/min Cleaner type: air Foundation: no Fgslqolf Hq Ns Ecqysb Housing protection: Mn Req. air flow: yes Total width of machine: mm Total height of machine: mm Total length of machine: mm

Year of construction: 2024, Condition: new, Functionality: fully functional, Convection baking oven Fjlqecutrle Ecqyegb Powder furnace new SLS - 90 / O * D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Homogeneity < ± 3 ° C, if 180 ° C Max < ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Delivery time approximately 12 to 16 weeks after ordering Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta, Peinture en poudre, thermoplastique, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування gemapulverbeschichtungskabine Powder coating plant Powder coating plant Powder coating cabin for powder coating Surface technology Powder gun Powder guns Einbren

Condition: new, Year of construction: 2025, Functionality: fully functional, total height: 610 mm, total width: 625 mm, total length: 800 mm, overall weight: 100 kg, input voltage: 230 V, suction capacity: 1,200 m³/h, The LTA E 120 air filter extraction system is an electrostatic filtration system specifically designed for the separation of oil and emulsion mists in industrial applications. Such systems are characterized by consistently high separation efficiency and contribute to sustainable production. A key feature of LTA filtration systems is the automatic cleaning in place (CIP) system, which ensures consistently high filtration efficiency and long-term operational reliability. This system automatically cleans the filter elements with the cooling lubricant used in the machine, without the use of chemical additives or diluted solutions. Fslqev S E H Ue Ecqyegb

Condition: new, Year of construction: 2025, ⭐⭐⭐⭐⭐ (5.0) ⚡ Top Service | Fast Delivery | Excellent Support ✈️ Delivery Time: Only 8 Weeks ✅ Energy Efficiency Class A+++ ☀️ 2-Year Warranty Buy Directly from the Manufacturer – Benefit from Over 40 Years of Experience in Surface Coating Technology! 💶 Flexible Financing Options: Maintain liquidity with our attractive hire purchase, leasing, and warranty programs. Contact us today for details! 🌀 Mono Cyclone & Jet-Pulse Filter Unit for Large Powder Coating Systems Ideal for operations that require efficient powder recovery: Powder is collected beneath the mono cyclone, sifted through a mesh, and transferred to the color station via pneumatic pumps. From there, it is automatically fed back into the powder coating guns. ✔ Key Advantages: No need for an exhaust air duct Clean and convenient powder recovery process Compatible with all automatic powder coating booths Suitable for walk-in type booths as well Optional: Use the Jet-Pulse filter unit alone for an environmentally friendly, recovery-free setup 🔄 High-Efficiency Recycling Technology Only 4% material loss Maximized powder reuse Fully compatible with Proton MA-RYC-PRO Color Station for optimized performance in automated systems 👉 More details available in our listings or on our website. Fslq Esdy E A Secqysgb 🎨 Color Options: Our standard color combinations: Yellow-White Anthracite-White Custom RAL colors are also available upon request – please note that additional charges apply. ✅ Your Benefits at a Glance: Fast delivery in 8 weeks Direct from the manufacturer Energy-efficient (A+++) Comprehensive warranty & support Flexible financing models State-of-the-art powder recovery system

Condition: good (used), Year of construction: 2002, Hook type shotblasting machine 200x300 / 2x 3.000kg with motorised hook with crane. Machine is in GOOD condition and allready partly refurbished. TOSCA TS 2000x3000 Type: Hook type Max. diameter of workpiece: 2000 mm Max. height of workpiece: 3000 mm Max. workpiece weight: 3000 kg Machine oppening width: 2300 mm Nr. Of turbines: 4 Turbine type: TC 36 Turbine wheel diameter: 360 mmm Fgelq Ecqsu Trluoyjb Power of turbine: 11 kW Max. turbine flow: app. 154 kg/min Type of transport rail: I Cleaner type: airwash Foundation: yes Housing protection: Mn+ rubber Filter: Yes 12 cartridge 9.000 m3/h Total width of machine: Total height of machine: Total length of machine:

Year of construction: 2022, Condition: new, Model KPO-3 Booth Type Open Worksize dimensions 2800 width x 2200 height x 1000 depth Overall dimensions 2800 width x 2300 height x 1700 depth Weight 550kg Power supply Electric Nominal power 0,69kW x2 Voltage 380V Frequency 50-60Hz Filters Polyester Filters count 3 Filters hang type Bagnet type, easy on/off Filter area 22,5m2 Filter cleaning system Pneumatic - Jet Venturi Ventilator type Aluminium ray rotor 2pcs. Loudness 74dBa Air consumption 10,200m3/h Felq Ecqebuyr Tjyjgb Warranty 12 months

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Fgolqevpgq Ns Ecqyob Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 5,5 kW Max. turbine flow: 75 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. Pictures are showing the condition before refurbishment works.

Year of construction: 2022, Condition: new, Model SLS-9 working dimensions 1000 width x 1400 height x 1200 depth External dimensions 1200 width x 1660 height x 1400 depth Electrical power supply Rated power 9 KW Voltage 380V Frequency 50-60Hz Door type One-sided, blind Homogeneity <± 4,0 ° C, at 180 ° C Temperature stability <± 5 ° C Temperature max. 230 ° C Transport: without Gravity Heaters Exchangeable heating modules Capacity 3456 L Warranty 12 months Delivery time: approx. 12 - 16 weeks after ordering Shipping costs will be calculated individually. GERMAN SPEAKING CONTACT PERSONS IN GERMANY JUST ASK Also plants according to your desire you simply ask Felq Ejb Al Akjcqyjgb More information under Romer Germany Pintura en pols, pintura electrostàtica, Powder Coating, Jauhemaalaus, muovijauhetta , Peinture en poudre, thermoplastique, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування gemapulverbeschichtungskabine powder coating plant powder coating plant powder coating powder coating booth surface technology powder gun powder guns baking oven powder oven Industrial oven INDUSTRIEOFEN Air circulation stoving furnace Powder furnace

Condition: excellent (used), Year of construction: 2020, operating hours: 1,800 h, NAME: COGEIM STL 850 - 4TR Type: Wire mesh conveyor Max. width of workpiece: 850 mm Max. height of workpiece: 500 mm Nr. Of turbines: 4 Turbine wheel diameter: 380 mm Power of turbine: 11 kW Max. turbine flow: 180 kg/min x 4 Transport speed: 0,5 - 5 m/min Cleaner type: Airwash Filtering unit: Included 9.600 m3/h - FC12 Foundation: no Total width of machine: mm Total height of machine: mm Total length of machine: mm Max installed power: 67,2 kW !!! MACHINE IS LIKE NEW !!! !!! ONLY 1800 OPERATION HOURS !!! Fgoleraz Rdeq Ecqyeb

Year of construction: 2019, Condition: new, Powder coating machine Mini - for beginners The Spark / ROMER® powder coating plant Mini - consists of: Powder oven SLS-9 small Fgjlsctx Irjq Ecqyeb (inside: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 Delivery time: approx. 12 to 16 weeks after ordering Shipping costs will be calculated individually. ( also self collection ) In order to offer you a detailed quotation for a system tailored to your application, further details regarding the application and the batch would be necessary. We will then immediately prepare an offer for a suitable plant in the dimensions according to your request. Payment terms: 30% deposit and the 70% balance upon notification of readiness for shipment.

Condition: excellent (used), Year of construction: 2006, NAME: COGEIM STL 850 - 8TR Felq Ecsu Trgloqyjgb Type: Wire mesh conveyor Max. width of workpiece: 850 mm Max. height of workpiece: 500 mm Nr. Of turbines: 8 Turbine wheel diameter: 380 mm Power of turbine: 7,5 kW Max. turbine flow: 120 kg/min x 8 Transport speed: 0,5 - 5 m/min Cleaner type: Airwash Filtering unit: Included Foundation: no Total width of machine: mm Total height of machine: mm Total length of machine: mm Max installed power: xx kW

Condition: excellent (used), Year of construction: 2002, NAME: COGEIM STL 600 - 4TR Type: Wire mesh conveyor Max. width of workpiece: 600 mm Max. height of workpiece: 400 mm Nr. Of turbines: 4 Turbine wheel diameter: 380 mm Power of turbine: 7,5 kW Fjlq Eeu Trc Hocqysgb Max. turbine flow: 105 kg/min x 4 Transport speed: 0,5 - 5 m/min Cleaner type: Airwash Filtering unit: Included 9.600 m3/h - FC12 Foundation: no Total width of machine: mm Total height of machine: mm Total length of machine: mm Max installed power: 55 kW !!! MACHINE IS IN VERY GOOD CONDITION !!!