Industrial robot

ABB IRC5 IRB6640-205/2.75 FP

Condition: new, Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 16102025, total length: 14,000 mm, total width: 4,000 mm, total height: 3,030 mm, overall weight: 3,000 kg, input voltage: 220 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 14 bar, compressed air connection: 6 bar, input current: 12 A, temperature: 10 °C, heating capacity: 3 kW (4.08 HP), power: 6 kW (8.16 HP), warranty duration: 12 months, operating pressure: 14 bar, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, documentation/manual, lighting, The KEG barrel is manually placed on the conveyor with the top down. On the control panel, the type of KEG barrel to be worked with is set and started with the “START” button. The conveyor chain also acts as a buffer - for three 30L KEG or five 10L KEG barrels. When the barrel enters the washing machine, the conveyor stops and the washing is started. The machine consists of 2 zones - washing with chemicals and the second for rinsing. The first (longest) processing zone is used for the main cleaning with chemicals. The second zone is used for rinsing. Spray pipes are fixed in each spraying zone. Along the sides, bottom and top to ensure the cleanliness of the specified Keg barrels. Washing with chemicals and adjusting the amount of its supply, as well as without chemicals, is possible. Drive rollers ensure the fixation of the barrels and their rotation during washing, brushes wash the sides of the KEG barrel, the arrangement of high-pressure nozzles ensures water supply to the brushes and washing of the bottom of the barrel. Washing of one barrel max. 1.5 min., this time can be changed depending on the degree of dirtiness of the barrels. Excess water is drained into the sewer through the overflow. After washing, the barrels are fed to the filling machine with elevators. A sensor on the line near the filling machine controls the operation of the line. If the sensor is covered, the barrel feed is stopped and is automatically resumed when the space becomes free. If at this moment the barrel is in the washing machine - the cycle is completed. If the space near the filling machine is free at the end of the washing cycle, the feed continues. If not - the barrel feed line is in standby mode. Ventilation is built into the washing machine body. Control panel: SIMATIC HMI, KTP400 Basic Controller: SIMATIC S7-1200, CPU 1214C Pump water output: Q min/max 5-13m3/h Chemical dosage – adjustable on the control panel Material used: stainless steel AISI 304 Cylinders: FESTO 2. Elevators: for KEG barrels Stainless steel frame Separation and ejection mechanism – pneumatic cylinders (FESTO) Chain – stainless steel • Dimensions and specifications are to be specified at the time of ordering. You can El. diagrams and drawings are submitted upon delivery of the equipment. Hedpfx Asv Di Dnoazou Warranty – 12 months from the moment of signing the invoice CE Certificate

Condition: excellent (used), Year of construction: 2013, load capacity: 205 kg, arm reach: 2,750 mm, Robot complete with control cabinet, cables, and teach panel. Can be inspected under power on site. Hjdpfx Aexn Rmbeazsu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, For sale: Schwarze-Robitec SR80 DB pipe bending machine. Manufactured in 2007. In very good condition. Fully functional. Equipped with a booster for mandrel-free bending. Hsdpfx Ajzd Ntxsazeu

Condition: excellent (used), Year of construction: 2011, Immaculate Fanuc packaging robot with controller which has come from a factory which closed a few years ago. The nicest robot we have had for a long time, very well looked after. Hjdpfx Aehn Szqeazju

Condition: as good as new (ex-display), High-definition HD generator for plasma cutting. From warehouse stock. Hsdpfx Aajg Tcufjzju Available for immediate delivery, subject to prior sale. A great opportunity.

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Hsdpfx Aoya Iaqeazsu Weight: 17,000 kg Good condition

Condition: excellent (used), Year of construction: 2007, load capacity: 140 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The robot offers a payload capacity of 140 kg and a reach of 2700 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Model: KR 200 L140-2 comp Payload: 140kg Arm Reach: 2700 Hsdpfow Idwusx Aazeu Condition: Used and Tested Year: 2007 Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We are offering for sale our Kuka laser welding robot KR60-3 with KRC4 ROBOTstar controller. The system is in very good condition and is being sold only due to a product change by a customer. Laser welding robot KR60-3 with KRC4 ROBOTstar controller. Scanner – processing optics in combination with a camera system for welding copper connections. Component feed via Bosch Rexroth transfer system TS 2 plus. Laser system from IPG with 5 kW power and a fiber output. Media supply. Rotary-tilting module DKP 400. Laser protection cabin, active according to EN 60825. Control panel / HMI for operating the system. KUKA system control and PLC cabinet. Extraction and filter system. The system will be sold from its current location (Zollner Electronic, Str. Parc Industrial Sud 10, Satu Mare 440247, Romania). We will gladly answer any questions you may have about the system and provide you with all relevant documentation. The new price of the system in 2019 was approximately €980,000. Inspection and demonstration are possible at any time by appointment. Special feature of the system: also suitable for deep copper welding!!!! Hsdpfevtnd Sox Aazeu Expected availability: Immediately. We would like to emphasize “explicitly” the very good technical and visual condition of the entire system!!! The camera head alone costs more than €85,000!!!

Condition: excellent (used), Year of construction: 2011, Year of construction: 2011, Arm range: 1717 mm, Hjdpfxotxymmo Aazju weight: 20 kg, Control unit: DX100

Condition: good (used), functionality: fully functional, Year of construction: 2019, LiftMaster 1530 loading and unloading system for sale due to lack of use. It was previously used with an L20 CO2 laser. Hedpfezdiwmjx Aazou