Spraying unit 150 - PRICE REDUCTION!

Arburg Spritzaggregat 150

Condition: ready for operation (used), Used Machine Ijdpju Ti Srofx Ag Usth Injection Moulding Machine Manufacturer: Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx. Itedpfxera N A Ne Ag Ush

Condition: excellent (used), Year of construction: 2005, Arburg 370S-800-150 Closing 80 TO Scrow 30 mm Itedpfjidmc Isx Ag Uoh Bar spacing 37x37 Control S Year 2005 Operating hours 46201 ST Plus sprue picker

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Year 1992 Scrow 32 Spray weighted 123g Itodpfx Aouh U Izog Uoh

Condition: new, Year of construction: 2025, bending angle (max.): 150 °, sheet thickness steel (max.): 1 mm, sheet thickness copper (max.): 1 mm, ❗❗ Electric sheet metal bending machine RED-3200/1.0/150* with recess ❗❗ Discover a new era in metalworking with our revolutionary sheet metal bending machine that harmoniously combines craftsmanship heritage with the latest technological developments. We present a machine that not only meets but exceeds your wildest expectations. Don't miss the chance to equip your workshop with a groundbreaking tool that eliminates the traditional difficulties of manual bending and offers unprecedented comfort and efficiency. Bending machine / bending machine / roofing machine Polish manufacturer PROD-MASZ / brand new directly from the manufacturer Isdpfecv R Dkox Ag Ujth With our bending machine, equipped with an advanced electronic control system, precision and ease of use become standard. Now one push of a button starts the bending process and guarantees flawless results without unnecessary effort. Magnets attached to the bending beam ensure a stable position of the sheet metal and enable precise dimensional adjustment, which is the key to perfect shapes. The RED 3200/1.0 mm/150* offers an impressive maximum working width of 3,200 mm and the ability to bend steel sheets up to 1.0 mm thick, with non-ferrous metals achieving an additional 30% capacity. The maximum bending angle of 150 degrees and the ability to cut sheets across the entire working width push the boundaries of precision and efficiency. In addition, the machine offers a three-stage height adjustment of the upper beam and a number of necessary accessories, including a protractor, an angle limiter, a rear table for supporting the sheet -> quick adjustment with a handwheel. We look forward to hearing from you! -> We issue invoices

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm Itjdpfjwizltox Ag Ush bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are compatible with a HERKULES WETZLAR profile bending machine, type BO 238 N Iodpfxeglaq Io Ag Uoth Shaft diameter: 60 mm with 18 mm keyway 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm 3 pieces, roller set No. 3, roller diameter 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway The machine had 2 driven rollers Weight of all rollers: 57 kg Good condition

Condition: used, Year of construction: 2006, operating hours: 60,000 h, Injection molding machine Krauss Maffei 50-180 CX Year 2006 Iedpfx Asv Tmzpsg Uoth screw di 30

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line with Injection Molding Machine, Model 110/750 CX with Digicolor Drying Station, Model DW 25/40 (serial 191511221); Krauss Maffei handling unit, Model LRX 100 (serial 2118836); Keyence Deutschland GmbH Discharge Blower, Model SJ-FW; and associated belt conveyors. Itedpfxemn S Efj Ag Ujh

Condition: new, Hydraulic workshop press LFSS Typ. DPM 1070/100 Technical specifications Pressure 100 t stroke 300 mm table area 1070 x 260 mm column passage between the guides 1070 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 5,5 kW Isdpfjgipiljx Ag Ueth Machine weight approx. 1400 kg. Space requirement approx. 2110 x 1000 x 2290 mm equipment: hydraulic workshop press table height adjustment V-block tool insert Pressure gauge