Used Dryer for sale (98)

Condition: good (used), Type Luxor LS80 Series No. 08 020 044/07 0135 Dry air quantity 80 m³ /h Bwjlijwalxlsn Hpuel Connected load Max 10.2 kW Heating power 6.5 kW

Year of construction: 2004, Condition: ready for operation (used), Capacity: 50kg, max. operating temperature: 400°C, heating capacity: 3kW, insulation thickness: 80mm, diameter: 710mm, height: 1175mm, weight: 75kg. Documentation available. On-site inspection is possible. Bjlewg E Dnoin Hpuewl

Year of construction: 2007, Condition: good (used), LABOTEK DDM4-120 Dry Air Dryer Stock No.: 503563 Machine Type/ Equipment Type: Dry Air Dryer Manufacturer: LABOTEC Type: DDM4-120 Year of Manufacture: 2007 The DDM is a mobile dry air dryer designed for the continuous drying of free-flowing plastic materials in granular form. The DDM is supplied as a standard mobile unit and can be installed alongside the processing machine(s) that will be supplied with dried raw material. The DDM is supplied as a standard unit with automatic dry air material transport to one processing machine and can also be supplied with a transport system for two processing machines. The DDM is designed for the drying of hygroscopic and non-hygroscopic raw materials, including reclaimed material, in the temperature range between 60 and 140°C with a maximum deviation of +2/-2°C. DDM is also available in a HT/LT (high/low temperature) version, which dries in the temperature range of 50-180°C. Due to the highly precise temperature control and a dew point temperature of -30°C, a residual moisture content of less than 0.02% can be achieved. (HT/LT 0.002%) Belin Hpowakwgsujwl - Connected load: 9 kW - Tank volume: 120 liters - Heating capacity: 8 kW

Condition: used, Year of construction: 1990, 14 Motan silos in various sizes are for sale. Bwjliswb U R Hjn Hpuel Price per silo €700. Motan system €3,000.00 including a system as a spare parts donor.

Condition: used, Dryer / centrifuge / dry cleaner Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h depending on the type of plastic and wall thickness Drive power 30 kw Boliowbt Dfon Hpujwl

Condition: good (used), Insulated material silos for Lanco dryers Bslinjv A Rh Ss Hpuswl 4 pieces Some with additional heating

Condition: new, New appliance ENMAIR Dry air dryer EDD4-75/50 Appliance available at short notice Honeycomb principle (drying wheel) Drying container 120 liters (75 kg) Air flow rate 50m³ / hour Power consumption during drying 4 KW Power consumption during regeneration 3 KW Achievable dew point down to - 60°C Bjlin Hou Ti T Nspuewl Connection 400 Volt, 50 Hz Mobile on frame Height X width X depth 1670 X 1070 X 620 Weight 320 kg Optional: - Suction box for dry air dryer - Suction conveyor Enmair EML

Condition: used, Functionality: fully functional, The drying silo of the company Wittmann is for sale , it is mobile . It has been fitted with a new power supply unit and there is also an operating manual , see pictures ! Bwolor H Engein Hpusl

Year of construction: 1990, Condition: ready for operation (used), *Colortronic T342 Air Dryer for Sale* The dryer is in good condition and fully functional. - Factory number 80900056 - Year of manufacture 1990 - Motor power 1.6 kW - Heating power 21 kW - 2x 200 liters Location: 86551 Aichach, alternatively 84405 Dorfen. Loading by forklift. Please feel free to contact us if you have any questions. Bwjlinjv Dlvmo Hpuel

Year of construction: 1999, Condition: excellent (used), Dryer Mann+Hummel Pro Tec TF 70 Bweler Avfrjin Hpuol Year of manufacture 2001

Condition: used, kW: 30 Rotor diameter: 500 mm Bwoliswbt A Usn Hpujl Rotor width: 1200 mm

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, Labotek dryer Type: DDM 60 ALB Labotek CON-EVATOR material conveyor Bwslijvrubnon Hpujl Type: PGT 4/DDM Power: 0.5 kW

Condition: new, Functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Bwolinjwg Sd Us Hpuel Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2020, Condition: new, Hopper Dryer FASI CHD-50T, d=430, H. 1140mm, 50kg, 3.9kW, NEW Bwslinev Nkcvj Hpusl

Year of construction: 2012, Condition: ready for operation (used), Dryer: Diameter of process line/regeneration drain line/compressed air line: 88.9mm/50mm/8mm, degree of filtration: 20µm, filter area: 0.24m², max. process temperature: 200°C, weight: approx. 415kg. Tank: diameter: 996mm, height: approx. 2000mm, total height: approx. 2450mm, empty weight: approx. 160kg. Documentation available. On-site inspection is possible. Bwjlin Hjv R Ewwspuel

Year of construction: 1990, operating hours: 23,710 h, Condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. – Brand: Motan – Model: MDC 800 – Construction year: 1990 Bwjlin Hpomgadpeujl – Working hours: 23,710

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Bwsljwbt Auoin Hpusl Drive power 30 kw A total of four dryers of this model are available.

Condition: good (used), Functionality: fully functional, Labotek dryer Type: DDM 120 ALB Bwelijvtxmwjn Hpuol Power: 8.9 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Year of construction: 1992, Condition: good (used), Ø Heating capacity. 18 KW Ø Connected load: 27 KW Ø Temperature: 250 degrees Ø Dimensions. 2,65m x 2,25m x 2,5m Bwjlinjgnyz Aj Hpusl Ø Front side 1-door Ø Rear side 2-single flaps for material removal Ø Ready for connection with plug CEE 63 A The HWT 2200 is functional and can be repainted on customer request.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 04050906032, Offer 20234 Bslinev In Rbj Hpuswl Technical data approx.: - Filling capacity approx. 200 L - Granulate feed via suction device - Drive power 6200 watts - Temperature controller - Compressed air connection 6 - 8 bar - Mobile version - Space requirement W 1050 x H 2350 x D 700 mm - Weight approx. 180 kg

Condition: ready for operation (used), Dry air volume: 120m³/h, connected load: 15.4kW, heat output: 10.5kW. On-site inspection is possible. Bolovvwpcein Hpuowl

Condition: good (used), Year of construction: 1999, machine/vehicle number: 1770, Brand: Werner Koch Technik GmbH Model: CKT 110 Year of construction: 1999 Bjlin Hpeu Aqg Sjuowl Dry air quantity: 110 m³ /h Volume bin: 400 L

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, power: 8.9 kW (12.10 HP), Labotek dryer Type: DDM 120 ALB Power: 8.9 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Bwslisvrubhen Hpujl Power: 0.5 kW

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, power: 9.5 kW (12.92 HP), Labotek dryer Type: DDM 120-S Bjlsvrubbsin Hpuswl Power: 9.5 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Condition: like new (used), Year of construction: 2015, Functionality: fully functional, Dryer: Manufacturer: Ryser GmbH Switzerland Type: BAFAG ATU 35 Power: 3 kW Year of construction: 2015 Material conveyor: Manufacturer: Labotek Type: PGT4-1/MV/MR/P1 Bwelin Hou Rcz Dopujl Power: 0,4 kW Year of construction: 2016