Second-hand machinery for sale (2,409)

Condition: used, Year of construction: 2007, functionality: fully functional, • Machine type: Oil-free air compressor • Product designation: ZR 500 VSD • CE marking: Yes (CE 0038) Ljdpfx Asx Iuc Ajh Ueak Manufacturer • Manufacturer: Atlas Copco • Place of manufacture (per rating plate): Made in Belgium Identification • Type: ZR 500 VSD • Serial number: AIF118346 • Year of manufacture: 2007 Technical data (rating plate) • Maximum operating pressure: 8.60 bar(e) • Input power: 497 kW • Shaft speed: 2,180 rpm Control and operation • Control system: Elektronikon® (as indicated on control panel) • Integrated display with membrane keypad • Emergency stop button on the front panel

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, controller model: Siemens Simo Drive 611, spindle speed (max.): 30,000 rpm, TECHNICAL DETAILS Number of working spindles: 1 Spindle speed: 30,000 rpm Control: Siemens Simo Drive 611 EQUIPMENT Lsdpfx Aex Hv Nuoh Uoak Remote control Spraying device Measurement protocol for spindle overhaul (2020/02)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 17496, Year of construction: 2017, operating hours: 11,962 h, load capacity: 3,500 kg, lifting height: 5,450 mm, free lift: 1,870 mm, mast type: triplex, fork width: 1,240 mm, TECHNICAL DETAILS Lift height: 5,450 mm Free lift: 1,870 mm Fork length: 1,160 mm Fork width: 1,240 mm Maximum fork width: 1,240 mm Minimum fork width: 440 mm Lifting capacity: 3,500 kg MACHINE DETAILS Lsdox Ahw Tspfx Ah Uoak Mast type: Triplex Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,600 x 2,720 mm Weight: 6,900 kg Fuel type: electric Year of battery: 2016 Battery capacity: 775 Ah Battery voltage: 80 V Travel direction: 4-way EQUIPMENT Attachment: Fork spreader Documentation CE marking Tested until: 12.2025

Condition: used, Year of construction: 2007, functionality: fully functional, • Machine type: Refrigerant air dryer for compressed air • Product designation: FD 2400 VSD • CE-marked: Yes (CE 0038) Manufacturer • Manufacturer: Atlas Copco Airpower n.v. • Place of manufacture: Wilrijk, Belgium • Brand name on housing: Atlas Copco Identification • Type: FD 2400 VSD • Serial number: AIF125258 • Year of manufacture: 2007 Electrical data • Supply voltage: 400 V • Frequency: 50 Hz • Power consumption: 3.5 kW • Phase: as indicated on the type plate (Ph, exact number not specified) Operating data • Maximum compressed air pressure (Pmax): 13 bar(g) • Maximum inlet air temperature (Tmax): 55 °C • Ambient temperature range: Max: 45 °C Ljdex Iub Ejpfx Ah Uoak Min: 3 °C Cooling system • Refrigerant type: R404A • Refrigerant charge: 15 kg • Maximum refrigerant pressure (high pressure side): 29 bar • Refrigerant pressure (low pressure side): not specified Weight • Machine weight: 1,180 kg Control and interfaces • Control system: Elektronikon® (as indicated on the control panel) • Integrated display and membrane keypad on the front door

Condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, TECHNICAL DETAILS Sheet thickness for blanks with tensile strength of 400 N/mm² max.: 3.5 mm Minimum sheet thickness: 0.5 mm Punch head force max.: 40 presses with max. force of 7 t & 4 presses with max. force of 26 t Lower cylinder force max.: 6 t Double-punch force: 12 t (2 hydraulic punches) Minimum entry sheet length: 370 mm Maximum entry sheet length: 3,048 mm Minimum entry sheet width: 300 mm Maximum entry sheet width: 1,524 mm Maximum entry sheet diagonal: 3,408 mm Minimum exit sheet length: 250 mm Maximum exit sheet length: 3,048 mm Minimum exit sheet width: 60 mm Maximum exit sheet width: 1,524 mm Vertical stroke of scissor lift table: 550 mm Usable load capacity of scissor lift table: 5,000 kg Minimum dimension of stackable sheets: 300 x 100 mm MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller conveyor PRL3814F Universal destacking device DUF15 Punch head H2 Oil-hydraulic power unit C1515 (3-stage pump assembly) Lower cylinder EI09 Double rotary punch P2R36 Water-air chiller unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 MHz WINDOWS NT Ledpfxex Hvyme Ah Usak Documentation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516329J00102, Year of construction: 2018, operating hours: 11,771 h, load capacity: 5,000 kg, lifting height: 4,400 mm, free lift: 1,530 mm, mast type: triplex, fork width: 2,050 mm, TECHNICAL DETAILS Lifting capacity: 5,000 kg Lift height: 4,400 mm Free lift: 1,530 mm Fork length: 2,400 mm Maximum fork width: 2,050 mm Minimum fork width: 560 mm Overall height (under clearance): 2,320 mm Mast type: Triplex MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,400 x 2,320 mm Unladen weight: 7,616 kg Fuel type: Electric Battery capacity: 930 Ah Battery voltage: 80 V Number of wheels: 4 Operating hours: 11,771 h EQUIPMENT Lajdpfx Ajx Ahnfsh Ujk Fork positioner Side shift Heater Full cabin Free lift Work lights

Condition: used, Year of construction: 1971, functionality: fully functional, 1. Machine Classification • Machine type: Rubber sheet/tread processing machine and winding system • Component designation: “R-Winder 1” 2. Functional Description • Transport of rubber sheet material • Controlled dispensation of rubber compounds and auxiliary lining or interlayer materials • Winding of processed rubber components into rolls suitable for downstream tire production processes 3. Mechanical Structure • Heavy-duty steel frame construction Laodpfx Aex Iua Uoh Usk • Surface finish: Industrial green coating 4. Conveying and Material Transport Systems • Wide flat-belt conveyor system for transporting rubber sheets • Overhead mounting points for rolls of lining and interlayer materials 5. Safety Equipment • Yellow safety fence around the operating area • Operator-accessible emergency stop buttons 6. Control and Operation Interface • Local control panel • Integrated display screen • Physical push-button controls • Integrated communication handset Some images show the machine in the condition in which it was still in use. These are provided for presentation purposes only.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Lajdpfsx A Umnsx Ah Uek Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, overall weight: 7,000 kg, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Working width: 950 mm Working height: 0.5–120 mm MACHINE DETAILS Control system: CNC Motor power: 39.0 kW Dimensions & Weight Ljdpfx Aox Ahm Ioh Uoak Dimensions (L x W x H): 3,940 mm × 1,980 mm × 2,010 mm Weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Condition: used, Year of construction: 2007, functionality: fully functional, 1. Electrical and Performance Data • Rated power: 22 kW • Power supply: 400 V / 50 Hz • Rated current: 35 A Lasdpfox It Uqsx Ah Ujk 2. Pneumatic System • Operating pressure range: 4 – 10 bar 3. Control and Operating System • Control unit (HMI): Allen-Bradley PanelView 550 • X-ray control: Gulmay MP1 data protocol controller 4. X-ray Generation System • High voltage generator: Gulmay FC160-1/2 • Configuration: Mobile unit • Country of manufacture: England 5. Enclosure and Safety Equipment • Fully enclosed, radiation-shielded cabins • Cabin color: white/blue • Integrated safety interlock system 6. Material Handling System • Integrated motorized roller conveyor • Conveyor belt configured for both infeed and outfeed of material 7. Electrical Installation • External control cabinet system • Multi-door cabinet array • Control cabinet manufacturer: Rittal

Condition: ready for operation (used), functionality: fully functional, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Submitting a bid obligates the buyer to collect the item by the deadline of 28/01/2026! A prompt appointment for collection must be arranged after the end of the auction, as the machine has not yet been dismantled. TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISA steep taper No. 50 Drilling depth in one pass: 710 mm Lowest spindle center height above table: 0 mm Highest spindle center height above table: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal movement of tailstock: 1,300 mm Spindle speed range: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Transverse travel of the table: 1,200 mm 34 feed rates for spindle, headstock, and table: 0.017 - mm/rev Infinitely variable feed for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Current type: Three-phase Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Laedpfox Hfugjx Ah Ujk Documentation including wiring diagram Electrical schematics Operating manuals

Condition: used, Year of construction: 2007, functionality: fully functional, Weight: 6,100 kg | Power supply: 400 V / 50 Hz / 41 A | Control unit: Allen-Bradley PanelView Plus 1000 | Workpiece clamping: Horizontal lathe chuck | Conveyor system: Integrated roller conveyor (infeed/outfeed) Lajdpfsx It T Hjx Ah Usk

Condition: used, Year of construction: 1973, functionality: fully functional, • 4-roller configuration Laedpfjx It Spjx Ah Usk • Asset description text: "4-ROLLER Z-CALENDER" • Several documented upgrades and overhauls listed (hydraulic system overhaul, electronic systems update, control upgrade, preheating system, bubble destruction device, etc.), including specified due dates

Condition: used, Year of construction: 2008, functionality: fully functional, • Device type: Oil-cooled transformer • Installation type: Stationary, floor-mounted • Application context (visual): Industrial power supply for production machinery Manufacturer • Manufacturer (nameplate): MGM Transformer Company • Manufacturer location (nameplate): City of Commerce, CA 90040, USA • Country of manufacture: United States (explicitly stated: "Made in USA") Identification • Manufacturer serial number (SN): 08-09-08-50232A • Additional identification mark: 7008608D0002 • Catalog number (CAT NO): M2885A2625U0333 • P/L No.: P2885TU-0333 Electrical Specifications (nameplate) • Rated power: 2885 kVA • Phase: 3 PH • Frequency: 50 Hz • High voltage (HV): 20,000 V • Low voltage (LV): 2300 / 2300 / 2300 V • Impedance: 6.36% at 2885 kVA • Insulation class: OA • Temperature rise: 65 °C Insulation / Dielectric Data • HV BIL: 125 kV • LV BIL: 60 kV • Cooling medium: Oil • Fluid level reference: – 14 in below handhole at 25 °C – Fluid level change: 0.64 in per 10 °C Mechanical Data / Tank Data • Suitable for tank vacuum: –10 PSI (vacuum filling) • Maximum operating pressure: +7 PSI • Altitude rating: Up to 3,300 ft above sea level Weight Information (nameplate, approx.) • Core and coil weight: 11,820 lb • Tank and fittings: 8,320 lb • Oil volume: 1,235 gal • Total weight: 27,500 lb • Weight without tank: 11,820 lb Tap Changer Information (nameplate) • Tap positions: 1 (A) to 5 (E) Ljdpfx Ahjx It Sco Usak • HV Tap Voltages: – 21,000 V – 20,500 V – 20,000 V – 19,500 V – 19,000 V

Condition: used, Year of construction: 1995, functionality: fully functional, 1. Pearl Winder – Gadsden • Enclosed winding machines with yellow safety covers • Multiple rotating winding discs and wire guides • Integrated control panels with push-buttons, indicator lights, and emergency-stop switches • Mechanical winding stations mounted on heavy steel frames • Visible wire feed paths and guiding elements 2. Pearl Extruder – Davis • Extruder assemblies with screw and barrel sections • Downstream guiding and forming components • Control cabinets and local operator panels Lodpfxex Itz Ro Ah Usak • Auxiliary equipment including heating/control units and material handling components • Safety devices integrated into the system 3. Carousel and Loader Robots • Articulated industrial robot arm by ABB (orange) • Rotary carousel stations with multiple indexed fixtures • Safety fences enclosing the robot working areas • Integrated control panels next to the robot cell 4. Coil Winding Equipment • Multiple wire pay-off and take-up reels arranged in series • Tension and guide rollers • Winding stations mounted on steel frames • Clearly separated parallel winding positions

Condition: used, Year of construction: 2001, functionality: fully functional, 1. Bead Winder – Gadsden • Enclosed winding machines with yellow safety covers • Multiple rotating winding discs and wire guides • Integrated control panels with push buttons, indicator lights, and emergency stop switches • Mechanical winding stations mounted on heavy steel frames • Visible wire feeding pathways and guiding elements 2. Bead Extruder – Davis • Extruder assemblies with screw and barrel sections • Downstream guiding and forming components • Control cabinets and local operator panels • Auxiliary equipment including heating/control units and material conveying components • Safety devices integrated into the system Laedpfxox Itzqj Ah Ujk 3. Carousel and Loader Robots • Articulated industrial robot arm from ABB (orange) • Rotary carousel stations with multiple indexed holders • Safety fences enclosing robot work areas • Integrated control panels next to the robot cell 4. Coil Winding Equipment • Multiple wire pay-off and take-up reels aligned in series • Tension and guide rollers • Winding stations mounted on steel frames • Clearly separated parallel winding positions

Condition: used, Year of construction: 2008, functionality: fully functional, • Manufacturer: inmess Gesellschaft für Industrie- und Messtechnik mbH • Manufacturer address (as stated on the nameplate): Frankfurter Str. 74, D-64521 Groß-Gerau, Germany • CE marking: Yes • Country of manufacture: Germany Machine Identification • Machine type (M/C Type): PLU • Machine number (M/C No.): 08-M-PLU-01 • Year of manufacture: 2008 Electrical Data (nameplate on the control cabinet) • Supply voltage: 3 × 400 V, 50 Hz • Control voltage: 24 V DC • Rated current: 12 A • Main fuse: 35 A • Rated connected load / Power: 6 kVA Weights • Machine weight (as stated on the nameplate): 1,900 kg Construction and Design (visible and verifiable) • Enclosed machine housing with transparent safety guards • Integrated control cabinet mounted on the machine frame • Main control panel with push buttons, selector switches, and emergency stop button • Additional emergency stop button visibly installed on the control cabinet • Mechanical working area fully enclosed by safety devices • Central horizontal spindle unit mounted on a rigid yellow machine base • Opposing spindle/support unit visibly positioned on the same axis • Linear guide rails visible on the machine bed • Pneumatic lines present in the working area • Cable drag chain installed for protected cable routing Safety and Warning Instructions Lasdpfxsx Itu Ds Ah Usk • CE conformity marking present • Laser warning symbol affixed to the machine frame • Emergency stop markings visible • Binder containing lockout/tagout operating instructions attached to the machine

Condition: used, Year of construction: 2020, functionality: fully functional, Technical Details: Manufacturer: • MEYER PLANTTEC • PLANER Systemtechnik Model / Designation: Weighing System Ricon 603 Lajdpfx Asx Itr Njh Usk Control Cabinet Type: 2005767 = P1 Power Supply: 400 VAC / 50 Hz Control Voltage: 24 VDC Maximum Fuse Capacity: 25 A Rated Current: 8 A Total Weight: 60 kg Serial Number: 2005767-1 Year of Manufacture: 2020 PST Drawing Number: 161-10-760-02 2. System Overview (Visible Components) 2.1 Structural Frame • Welded steel frame with grating work platform • Integrated drum support area • Mounted linear guide rails and table elements • Lower grating section for drainage or spill containment 2.2 Pump and Mixing Area Mounted on the left side: • Vertical, motor-driven pump assembly equipped with INVEOR motor controller • Pump inlet connected to a chemical container positioned on the system frame • Stainless steel piping connected to the valve block and dosing line 2.3 Valve and Drive Unit • Stainless steel valve block with flange connections • Pneumatic rotary actuator: AIR TORQUE Germany Type/Model: SC0050-AJZ Series: FGF-010-S-17 Pressure Range: max. 10 bar Torque Values: 29 Nm (min) / 60 Nm (max) Temperature Range: –40 °C to +180 °C Connections: 1/4" Certification: CE, ATEX (EX II 2 G Ex h IIC T6 Gb X / Ex h IIIC T85°C Db X) Year Code: 20138769

Condition: used, Year of construction: 2005, functionality: fully functional, (1) Bead apexing line (1), including AFC, conveyor belt, drum applicator, grinding conveyor, extruder Lajdpex Itmyofx Ah Uek

Condition: used, Year of construction: 2012, functionality: fully functional, Documented Modifications/Upgrades: Year Modification/Upgrade 2012 Installation of quadruple extrusion line no. 02 for individual treads 2012 Foundation for quadruple extruder no. 02 2012 Induction heating insert + die on quad. #02 2013 Expansion of extrusion tooling for profile/SW production 2014 2 compact asynchronous motors by Siemens 2017 Extruder screw 150 base quad 2 2019 Advanced closed-loop upgrade 2021 Advanced closed-loop upgrade Ledpfxox Ithdo Ah Usak 2022 New 200 mm screw for Troester extruder Control system: Modern control and visualization units (control panels, operator panels) Technical data: • Extruder screws up to 200 mm (2022) • Base screw 150 mm (2017) • Siemens asynchronous motors (2014) Maintenance/Condition: Regularly modernized and upgraded 2012–2022 Accessories / Options: Conveyor systems, heating and cooling units, monitoring and measuring stations, winding devices

Condition: used, Year of construction: 1996, functionality: fully functional, Triple extrusion line Technical details: Documented notes: The line has been modernized several times since its commissioning. Component arrangement according to diagram: • Head • Cylinder • Gearbox • Motors • Steel frame • Triplex extruder configuration • Control system with Beckhoff interface Lodpfx Ahox Itgas Usak • Operator screens for displaying extrusion parameters • Winder units designated as “Wickler” • Emergency stop button available • Industrial control cabinets installed

Condition: used, Year of construction: 1969, functionality: fully functional, Banbury Mixer No. 3 with Peripheral Equipment Documented Modifications/Upgrades: Year Modification / Upgrade 1962 Gearbox upgrade, Mixer III 1973 Weighing and feeding system for Mixer III 1981 Exhaust system for Mixer III 1985 Batch-off machine, Mixer 3 1985 Temperature control unit, Mixer 3 1995 DC motor 1500 HP, 1700 V, 1678 A 1996 Upgrade to KSBI-L270 Mixer III 2007 Hose scale for Mixer No. 3 2008 Vibration measurement system, Mixer III 2008 Column slewing crane for bale handling, Mixer III 2009 Vacuum lifting system, Kneader III 2010 CMS system for Mixer III 2013 Slab strip cutter for Kneader III 2014 Plate feeding system for Kneader III 2014 Overhead conveyor, Kneader III 2014 2 × floor scales for Kneader III 2014 New control systems for Kneader III 2014 Cooling coils MUAFAN 1+2 – cooling line mill Mixer 2+3 2015 Monitoring system (Mixer I–III) for CMS-Kneader III 2017 Mixer body, Kneader III (replacement) 2023 Rubber Kneader III KSBI-L270 Control System: New control systems 2014, CMS system 2010, DC drive/Automax, PLC batch-off & conveyor, documented AC drives Lsdpfxsx Itfpe Ah Ueak Maintenance/Condition: Regular modernizations and upgrades documented 1962–2023 Accessories/Options: Batch-off machine, plate feeding unit, installation conveyor, strip cutting device, floor scales, bale handling crane, vacuum lifting system, carbon black silos and weighing system, extruder, roll die, roll head with conveyor, cooling systems (dip tank, cooling line, discharge), control systems (DC drive, AC drive, Automax, PLC)

Condition: used, Year of construction: 1973, functionality: fully functional, Technical Details: Banbury Kneader/Mixer No. 2 with peripheral equipment Documented Modifications/Upgrades: Year Modification/Upgrade 1973 Installation of 2 × 38" ASM batch-off units – Banbury II 1979 Beth filter for Kneader II 1981 Extraction system for Kneader 2 solvent tank 1985 Temperature control unit for Kneader 2 1994 Automatic unloading system for Mixer No. 2 2008 Vibration measurement system for Mixer II 2008 Demag manipulator for Mixer I (2x) 2009 Power quality interface measuring device for kneader 2009 Ergonomic upgrade for rubber splitter 2010 CMS system for Mixer II 2010 TCU upgrade for Mixer II 2014 BB 270-6W mixer head transfer unit (HTU) for Kneader II 2015 Monitoring system (Kneader I–III) for CMS Kneader II 2015 Replacement of outdated computers and UPS for Mixer 2 2015 Installation of autorelease terminals Mixer II 2017 Hopper for Mixer No. 2 2018 Mixer 2 MS Version 4 2018 Sheet feeding system Mixer 2 2021 Replacement of mixer body / serial no. 16439 2022 Mill gearbox Kneader 2 Control system: CMS system, TCU upgrade, computers and UPS replaced Maintenance/Condition: Regular upgrades and modernizations documented (1973–2022) Accessories/Options: batch-off units, sheet feeding system, hopper, drop gate, roll head with conveyor belt, mill, dip tank, cooling line, stacking unit Lajdpfx Ahox Itdrs Usk

Condition: used, Year of construction: 2016, functionality: fully functional, mileage: 17,500 km, 1. General Description Machine Name: QUADRUPLEX EXTRUDER No. 1 REF No.: FU-FPs 647 2. Functional Scope and System Components The overview presents the complete production line in conjunction with the quadruplex extruder, including material conveying systems, belt guidance, belt scanning, acceleration zones, cross-cutting, and cassette winding stations. 2.1 Main Assemblies - Extruder head - Multiple "swings" (pivoting arms), numbered 0 to 13 - Strip scanning systems ("Scan 1", "Tri Scan", Strip detection 1–4) - Cross-cutting unit ("cross-cutter") - Cutting machine - "Cutting table" - Conveyor belts labeled BELT 1, BELT 2, BELT 3 Winding Section: - Cassette winders 1–4 - Winding stations labeled "Winder 1–4" Note: Winders 1 and 2 marked "out of service" - Cooling water tank - Cooler - Electrical peripheral equipment, TCU units (temperature control units), control cabinets ("control cabinet", "ctrl.cab.") - Steel platform structures ("platform", cooling section platform) 3. Operating Parameters 3.1 Production Speed 0–30 m/min (specified production speed range) 3.2 Acceleration Section (Acceleration Speed Q1) From the provided calculations: - Basic production speed: 30 m/min = 0.5 m/s - Rocker cycle time: 4 sec - Belt shifting cycle time: 4 sec - Gap length: 2 m - Acceleration length: 8 m - Acceleration time: 16 sec - Speed difference: 2 m/s = 7.5 m/min - Resulting acceleration speed: 37.5 m/min 4. Strip (Material) Specifications 4.1 Strip Dimensions - Strip width: 20 mm – 220 mm - Strip thickness: 1.5 mm – 16 mm - Strip temperature: 10 °C – 45 °C - Strip weight: 0.02 kg/m – 2 kg/m 4.2 Strip Lengths Along the Line (Exact lengths between defined mechanical and sensor points) - Extruder head → Swing 0: 3,997 mm - Swing 0 → Swing 1: 10,279 mm - Swing 1 → Strip detection 1: 14,400 mm - Strip detection 1 → Strip detection 2: 39,159 mm - Strip detection 2 → Strip detection 3: 1,812 mm - Strip detection 3 → Strip detection 4: 27,702 mm - Strip detection 4 → Cross-cutter: 22,032 mm - Cross-cutter → Transfer belt pos. 10: 13,956 mm Other splitting and merging sections: - From splitting point pos. 10.1 → Rocker pos. 5: 17,545 mm - From splitting point pos. 10.2 → Rocker pos. 5: 17,542 mm - From merging point pos. 10 → Belt splitting point pos. 1–4: 17,827 mm Final travel lengths to winding stations: Belt position To cassette station – belt end Position 1: 6,050 mm Position 2: 9,072 mm Position 3: 12,376 mm Position 4: 15,393 mm To Spool Core (inner core) Position 1: 6,844 mm Position 2: 10,004 mm Position 3: 13,346 mm Position 4: 16,325 mm 5. Installed and Referenced Equipment The document lists an extensive chain of equipment references from which the quadrup­lex extruder line is "derived" or which it "includes", for example: - FU-FPs 648 – Cassette winders - FU-FPs 649 – Conveyor modifications - FU-FPs 650 – Extruder modifications - Older equipment from Berstorff (1995–1996) - Triplex winding equipment - Steel structural foundations (2005, 2019) - Conveyor control desks (Erhardt + Leimer, 2019) Laodpfxex Irz No Ah Usk - Axelent safety fence - Various construction and civil engineering modifications (2018–2019)

Condition: used, functionality: fully functional, mileage: 17,500 km, Year of construction: 2000, Only available for pickup at the end of March 2026 Current mileage: approx. 17,500 kilometers (as of 17/12/2025) Firefighting Vehicle TSF (Portable Pump Firefighting Vehicle) Lasdpfx Aex Irwqeh Uek 1. Vehicle Classification • Vehicle type: Firefighting vehicle TSF (Tragkraftspritzenfahrzeug) • Applicable standard: DIN 14530 T 16 2. Manufacturer and Chassis • Body builder: IVECO Brandschutztechnik Görlitz GmbH (Magirus) • Chassis manufacturer: Volkswagen • Chassis type: LT 35 3. Identification and Production Data • Year of manufacture: 2000 • Serial number: 0887 • Internal call sign: 80/59/1 4. Previous Usage • Previously operated by the Goodyear Fulda plant fire department ("Werkfeuerwehr Goodyear Fulda") 5. Drivetrain • Transmission: Manual gearbox 6. Equipment Configuration (as installed) 6.1 Equipment Compartment G1 (Driver’s Side) • Holmatro hydraulic rescue equipment, consisting of: – Hydraulic power unit – Hydraulic spreader – Hydraulic cutter • Traffic cones • Medical backpack 6.2 Equipment Compartment G2 (Passenger Side) • Chainsaw (Stihl) • Breathing apparatus holders (Dräger) • Toolboxes • Chemical absorbent materials 6.3 Equipment Compartment GR (Rear) • Slide-out shelf for portable fire pump (TS) • Hose reel • Spine board • Stretcher