Punching & Bending Center

Salvagnini S4 P4

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,600 h, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, As part of a strategic realignment of our sheet metal processing center, we would like to offer you the opportunity to acquire our fully operational Salvagnini sheet metal processing line. The system is in use on a two-shift operation at our facility and has been consistently and professionally maintained. A full inspection of the entire line in ongoing production is possible at any time. Technical Specifications 1. Automated Storage System • Salvagnini rack storage system with 122 storage locations 2. Punching/Shearing Machine with Angle Shear • Salvagnini S4Xe.40 • Year of manufacture: 2015 • Operating hours: 29,500 • Max. sheet size 4064x1524mm; max. sheet thickness for steel 3.5mm, for aluminum 5mm. 3. Panel Bending Center • Salvagnini P4lean-3220 • Year of manufacture: 2019 • Operating hours: 6,900 • Max. bending length 3200mm, max. sheet thickness for steel 2.5mm. 4. Spare Parts and Tool Package • Extensive spare tool package • Various spare and wear parts 5. Condition and Maintenance • Two-shift operation • Regular maintenance according to manufacturer specifications 7. Availability and Handover • We have a suitable company on hand for dismantling, loading, transport, and reassembly at your site. Iedpsyli Hcofx Abvshw • Handover period: available at short notice We are happy to provide you with videos, etc., in advance upon request.

Condition: new, Year of construction: 2026, Putz P4 cement For on-site preparation of plasters CEMENT, SAND, LIME Pump motor 5.5 kw Mixer motor 2,2 kw 55/min Capacity for 2L6 pump approx. 25 l/min Capacity for 2L6 pump +++ 45 l/min Compressor 350 l/m Tank capacity 130 l Mixer capacity 130 l Height to mixer 118 cm Height to pump tank 71 cm Width of pump tank 64 cm Length without shoe 165 cm Weight 360 kg Included Working hose Air hose Spray gun Hose cleaning ball Shneka 2L6 Ihodpfxjtuiqyo Abvow

Condition: good (used), Year of construction: 1991, functionality: fully functional, Set consisting of a JMG shearing center, punching and SALVAGNINI panel bending machine VERY IMPORTANT LOT OF SPARE PARTS! Maximum bending length: 3100 mm Iedpfx Abeyatcdsvshw Maximum diagonal of blank and sheet: 3200 mm Maximum length of cut blank: 3150 mm Maximum width of cut blank: 1500 mm Minimum length that can be centered: 365 mm Maximum bending height: 160 mm Maximum sheet thickness at 400 N/mm²: 1.5 mm Bending angle: -135° to +135°

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning Ihsdsxayl Dopfx Abvjw - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: new, Year of construction: 2023, arm reach: 1,400 mm, load capacity: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Type: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder Ihsdpfx Aboqnt N Devsw -Welding source: TIG WSM400R -Cooler

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 Isdpfsxghngjx Abvjhw The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. * Ihodpfxsu Nigks Abvsw

Condition: good (used), Year of construction: 2011, functionality: fully functional, total height: 4,000 mm, inner dimension length: 6,500 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, workpiece height (max.): 2,200 mm, workpiece length (max.): 6,500 mm, Equipment: cabin, Powder coating system with workpiece size L6500mm, W1500mm, H2200mm New price approx. €800 000. Ihodpfjvdlfzex Abvew

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Iedpfx Ash Ad E Hsbvohw Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: P176/2021 & P177/2021, arm reach: 2,008 mm, type of input current: three-phase, total height: 3,000 mm, input voltage: 400 V, type of cooling: air, Equipment: CE marking, 2 Robotic Welding Stations OTC DAIHEN FD-B6L (2021) We offer two complete, modern welding stations, built entirely with components from a single manufacturer – OTC DAIHEN. ✅ Condition: • 1 station – brand new, never used, • 1 station – used for approx. 100 hours, in perfect technical condition. ✅ Configuration (identical for both): • 6-axis OTC DAIHEN FD-B6L welding robot (with FD-19 controller and teach pendant), • HWP 2000/400 positioner (two external axes, 400 kg/side), • OTC DAIHEN WB-P500L welding power source, • Automatic torch cleaning station, • Light curtain safety barriers and protective enclosure, • Full automation control cabinet and operator console, • Complete welding accessories (torch, wire feeder, cables, cooling unit). Ijdpfx Asxtag Ujbvehw ✅ Year of manufacture: 2021 📦 Available immediately – new units from the manufacturer have a lead time of 6–8 months! Lease transfer possible. 📑 Full documentation and OTC service support in Poland (SAP-WELD, Poznań).