Second-hand machinery for sale (2,431)

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, roll diameter: 500 mm, belt width: 62 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! Conveyor technology from the manufacturer Overbeck & Baving: a total of 400 m roller conveyor and 100 m belt or ascending conveyor are available. The height of all system stands can be variably adjusted. The entire system has always been under maintenance contract and is therefore in very good condition. All documents from the manufacturers for the system are available. All controls and sensors are available. The bidding obliges to binding collection in the period: 09.09.24 - 13.09.24 between 8 - 16 o'clock. Dkob Houcuvbon Sxmel TECHNICAL DETAILS Inside track dimension: 82 cm Outer track dimension: 92 cm Roller diameter: 500 mm Height: 80 cm Belt width: 62 cm Belt conveyor track width: 72 cm Number of 90° curves: 10 pieces Number of 45° curves: 2 pieces Conveyor belt element length: mostly 1.9 - 2.9 m Operating voltage: 3/PEN, 50 Hz, 400/230 V ± 5 % Control voltages: 24 V DC Shipping possible throughout Europe for an additional charge.

Condition: used, Functionality: fully functional, mileage: 266,648 km, power: 265 kW (360.30 HP), fuel type: diesel, Year of construction: 2007, Vehicle identification number WMAH39ZZ47M468240, registered in 2007, permissible gross vehicle weight 37,000 kg, gross vehicle weight 19,880 kg, engine power 10,518, 265 kW, diesel, mileage 266,648, concrete pump, SCHWING, type BP600RKMD, max. 350 bar hydraulic, 71 bar concrete/medium, length of the transition pipe at the outlet of the transport line 2,540 mm, volume of concrete 7 m³, TÜV until 07/2025, mixer was serviced by SCHWING in February 2024 (blade, vibrator, sensor replaced), truck, mixer and pump are in good condition Dkob Hnsv A Upme Sxmel

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, SUNNEN cross sanding machine with automatic lifting device in very good condition TECHNICAL DETAILS Honing diameter manual stroke: 1.5 - 165 mm automatic stroke diameter: 1.5 - 101.6 mm Stroke length: 6 - 170 mm Stroke speed: 60 - 500 1/min Spindle speed: 200 - 3000 rpm Spindle drive motor: 4.1 kW MACHINE DETAILS Connected load: 10.5 kVA Machine weight: approx. 1 t Dimensions: 2.0 x 1.3 x 1.9 mm EQUIPMENT - two-stage grinding pressure (roughing & finishing in one cycle) Djb Hn Sjtuu Dpjxmskl - automatic grinding pressure regulation (SDR) - Automatic sanding strips - wear compensation - Filter system for honing oil cleaning - Zero cut-off or ASC

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,926 h, Functionality: fully functional, machine/vehicle number: 15405042144, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece length (max.): 790 mm, workpiece width (max.): 560 mm, workpiece weight (max.): 600 kg, rotational speed (max.): 14,000 rpm, TECHNICAL DETAILS CNC control: Siemens 840D Dsb Hjunrvqen Sxmskl X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Feed speeds: 20 m/min Rapid traverse: 30 m/min Axis acceleration: 5 m/s² Work table Number of pallets: 1 Pallet dimensions: 560 x 790 mm Distance between spindle nose and table surface: 720 mm Max. Workpiece weight: 600 kg Spindle Max. Spindle speed: 14,000 rpm Spindle drive power: 18.5 / 15 kW (40% ED / cont) Spindle torque: 100 / 74 Nm Tool system Tool holder: SK40 Number of tools in the magazine: 30 Tool diameter with free adjacent positions: 130 mm Tool diameter with occupied neighboring slots: 80 mm Max. Tool length: 300 mm Chip-to-chip time: 6 s MACHINE DETAILS Total power requirement: 35 kVA Length: 2,275 mm Width: 3,288 mm Height: 2,670 mm Hours under power: 22,597 h Spindle hours: 15,926 h

Condition: excellent (used), Year of construction: 2020, operating hours: 9,260 h, Functionality: fully functional, spindle speed (max.): 7,000 rpm, turning diameter: 38 mm, rotational speed (max.): 5,000 rpm, spindle stroke: 320 mm, TECHNICAL DETAILS Turning diameter: 38 mm Total number of axes: 12 Max. rapid traverse speed: 30 m/min Control: FANUC 31i Model B5 Main page Number of axes: 8 Main spindle (headstock): Z1 / C1 axis Linear slide: X1 / Y1 / B1 axis B axis on linear slide: freely programmable Turret: X3 / Y3 / Z3 axis Machining data Dkeb Hn Ssvyhlvjxmol Max. machining diameter: 38 mm Max. headstock stroke (long lathe/short lathe): 320 mm / 95 mm Max. drive power main spindle: 11 kW Max. speed main spindle: 7,000 rpm Tools linear slide Turning tools: 3 pieces (⌀ 16 mm) / 1 piece (⌀ 20 mm) Cross-machining tools B-axis: 4 main side / 4 rear side Max. drive power cross-machining: 3.0 kW Max. speed cross-machining: 6,000 rpm Tools turret Number of tool stations: 10 (all driven) Max. drive power cross-machining: 4.0 kW Max. speed cross-machining: 5,700 rpm Rear side Number of axes: 4 Counter spindle: C2 / X2 / Y2 / Z2 axis Height axis rear side machining: Y2 Max. gripping diameter: 42 mm Max. drive power counter spindle: 11.0 kW Max. speed counter spindle: 7,000 rpm Tools rear side machining Tool stations: 8 (all driven) Max. speed rear side machining: 5,000 rpm MACHINE DETAILS Coolant tank capacity: 375 liters Dimensions (L x W x H): approx. 3,405 x 1,430 x 2,005 mm Weight: approx. 5,800 kg Workpiece counter: 340,748 pieces Processing time: 2,954 hours Switch-on time: 9,261 hours Control switch-on time: 17,637 hours EQUIPMENT - Chip conveyor and chip trolley - Parts conveyor belt - Fire extinguishing system - Oil mist extraction - JBS guide bushing device - Can be used as a long and short lathe - High pressure pump / new (exhibition piece), HYDRAJET UB20-2000 - Bar loading magazine FMB TURBO 5-65 / new (exhibition piece)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 300 h, Functionality: fully functional, arm reach: 2,015 mm, load capacity: 8 kg, Little-used robot - approx. 300 operating hours TECHNICAL DETAILS Number of axes: 6 Load capacity: 8.0 kg Reach: 2015 mm Repeatability: 0.05 mm Controller: KUKA KRC4 Welding unit: FRONIUS Trans Puls Synergic 5000 CMT Axis 1: ±185° Djb Hneuh T Iaj Sxmskl Axis 1 speed: 127°/s Axis 2: +35° / -155° Axis 2 speed: 130°/s Axis 3: +154° / -120° Axis 3 speed: 125°/s Axis 4: ±165° Axis 4 speed: 315°/s Axis 5: ±140° Axis 5 speed: 320°/s Axis 6: 360°, continuous Axis 6 speed: 680°/s Total load: max. 40 kg Additional load arm: 12 kg Additional load articulated arm: none Additional load on rotating column: 20 kg Additional load base frame: none MACHINE DETAILS Weight: 238 kg

Condition: good (used), Functionality: fully functional, Year of construction: 2018, operating hours: 1,685 h, load capacity: 3,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, Equipment: all wheel drive, No UVV-relevant defects! Place of use: indoor, outdoor and off-road use TECHNICAL DETAILS Lifting height: 9.60 m Max. reach: 6.50 m Max. load capacity: 3,000 kg Load capacity at full reach: 1,000 kg Mast type: extendable Fuel type: diesel Engine: diesel MACHINE DETAILS Transport dimensions (L x W): 4.60 x 2.10 m Clearance height: 2.02 m Own weight: 7,100 kg EQUIPMENT Dksb Hsv D Itbsn Sxmjl - 4x4 all-wheel drive - Off-road tires - All-wheel steering - Cabin with heating

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: P2000Y0745, turning length: 510 mm, turning diameter: 330 mm, spindle speed (max.): 4,000 rpm, swing diameter over bed slide: 330 mm, TECHNICAL DETAILS Control: Fanuc 18i -TB Turning diameter: max. 330 mm Turning length: max. 510 mm Diameter over bed: max. 330 mm Main spindle Spindle power: 11 kW Dkeb Hn Seuv D N Tjxmjl Spindle speed: 4,000 rpm Tool turret Number of turrets: 1 Number of tools: 12 Driven tools: available Driven tools Speed range: 45 - 4,500 rpm Spindle power: 5.5 kW MACHINE DETAILS Machine weight: 4,750 kg Connected load: 38.50 kVA

Condition: good (used), Year of construction: 2021, operating hours: 1,176 h, Functionality: fully functional, machine/vehicle number: 00583/0421/226923, High precision, compact, rigid, high performance, with direct drive, for production Machine already professionally dismantled and no longer under power. TECHNICAL DETAILS - (according to manufacturer's brochure) Spindle orientation: vertical Structure: with mobile table, columns Number of tools: 40 tools Area of application: for cutting X-stroke: 820 mm Y-stroke: 510 mm Dkob Hjtx Uvcsn Sxmol Z-stroke: 510 mm Rotation speed: 10,000 rpm Power: 14.3 kW Advance speed X-axis: 24,000 mm/min Y-axis advance speed: 24,000 mm/min Advance speed Z-axis: 24,000 mm/min Maximum table load: 500 kg Tool weight (max.): 7 kg Positioning accuracy: 0.01 mm Repeatability: 0.003 mm MACHINE DETAILS Total weight: 5,800 kg Total width: 4,390 mm Total height: 2,900 mm Operating hours: 1176 h (as of November/December) EQUIPMENT Chip conveyor

Year of construction: 2007, operating hours: 18,204 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 200038, TECHNICAL DETAILS X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm B-axis: 360º B-axis step size: 0.001º CNC control: Mazatrol MATRIX NEXUS spindle speed: 18.000 rpm spindle drive power: 30 / 25 kW spindle torque: 259 / 191 Nm rapid traverse: 60 m/min number of pallets: 2 pallet dimensions: 500 x 500 mm workpiece diameter: 800 mm workpiece height: 1.000 mm workpiece weight: 700 kg tool holder: SK-40 number of tools: 60 tool diameter: - with free neighbor places: 150 mm - with occupied neighbor places: 95 mm tool length: max. 420 mm tool weight: 12 kg MACHINE DETAILS hours under power: 80.452 h Spindle working time: 18.203 h Total power consumption: 65.7 kVA weight: 11.6 t Coolant supply through the spindle: 15 bar Tank capacity: 510 l Dsb Hn Selu E Icexmjkl EQUIPMENT - Equipment - Chip conveyor - signal lamp - High pressure pump - Work area light - Spindle active cooling unit

Condition: excellent (used), Year of construction: 2018, operating hours: 15,569 h, Functionality: fully functional, drill diameter: 11 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 DSL / 27-300 / Sinamics, slide length: 400 mm, Bidders are obliged to collect the machine by the deadline at the beginning of August. The machine can be shipped within Germany. Shipping price on request! Operating hours: 13,237 h (as of 25.07.2023) TECHNICAL DETAILS Possible cycle time: 6 s Station 1: Loading Station 2: Alignment and clamping Station 3: Drilling unit SP125/45 Station 3 Drilling diameter: 10.8 mm Tool holder: HSK 50 (IKZ) Carriage width / length: 250 / 400 mm Stroke: 250 mm Station 4: Milling unit SP 63/20 Station 4 face milling diameter: 3.18 mm (2x in succession) Tool holder: HSK 32 Dksb Hn Soum T Ewsxmol Z-stroke - slide dimension / stroke: 320 x 630 mm / 250 mm Y-stroke - slide dimension / stroke: 320 x 400 mm / 120 mm X-stroke - slide dimension / stroke: 580 x 360 mm / 120 mm Station 5: Turning unit SP 200/70 Station 5 Grooving diameter: 12.9 mm (IKZ) Slide dimension: 250 x 400 mm Stroke: 250 mm Station 6: Drilling unit SP 125/45 Station 6 Drilling diameter: 6.35 and 11.1 mm Tool holder: HSK50 (IKZ) Carriage dimensions: 250 x 400 mm Stroke: 250 mm Station 7: Drilling unit SP 125/45 Station 7 Countersink diameter: 11.15 mm Tool holder: HSK50 (IKZ) Slide dimensions: 464 x 800 mm Stroke: 400 mm Station 8: Unloading Control: Siemens Sinumerik 840 DSL / 27-300 / Sinamics Positioning rotary indexing table: Hirth face gearing EQUIPMENT Coolant supply 25 bar (paper band filter) Chip conveyor Loading and unloading belts Extensive documentation

Year of construction: 2018, Condition: like new (used), Functionality: fully functional, little used round cycle plant with 8 stations TECHNICAL DETAILS diameter machine bed: approx. 5000 mm Dob Hn Sxonfvymemekl weight: approx. 42 t Machine color: RAL 7035 light gray / base RAL 7016 anthracite Documentation: according to SEMA standard in German incl. CE marking on CD Hinged belt conveyor / cutter pump: built into base frame with hopper Lifting pump: 550 l/ min make KNOLL Coolant: 2500 I, 500 l/min (4 bar) EQUIPMENT - complete machine base frame - rotary table RTT 1200 NC controlled - rotary feed-through for the hydraulic supply - 8 x triple clamping devices externally mounted: 2 hydraulic three-jaw chucks each with integrated cylinder (clamping force: 40 kN/ 40 bar) - coolant tank system with pump for flushing - 14 lubrication points, piping and valves (lubricant: emulsion) - paper belt filter make KNOLL STATIONS Station 1: Feeding and unloading by robot - The part is clamped on the shaft. Station 2: Turning of the head contour (2-fold) - NC- feed slide SL 45-NC z-direction - 2 x facing unit SEMA PDE (without tools) spindle distance: 300 mm - 2 x facing head LAT-160-2-32 Station 3: Turning station via handling gripper (2-fold) - Part is now clamped at the machined head Station 4: Thread rolling (2-fold) - part is clamped at the head and supported in the hexagon - NC- feed slide SL 45-NC z-direction - 2 x spindle unit SEMA SE 100 (without rolling head and rollers) - 2 x torque support by hexagon socket - counterpart is inserted, turned to stop and disconnected Station 5: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 6: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 7: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 8: Thread deburring with deburring ring - 2 x spindle unit SEMA SE 55 (without tools) - NC- feed slide SL -NC z-direction - complete pneumatics make FESTO incl. piping - complete hydraulics make BOSCH/Rexroth or Parker incl. piping - central lubrication system make SKF incl. piping - swivel control panel with control panel front OP010C/PCU50 and keyboard - Control panel with control make SIEMENS 840 D-S7/ 24 NC axes - NC program for one workpiece - Complete cover with sliding doors (partially transparent) - pedestal

Condition: excellent (used), Year of construction: 2014, operating hours: 8,500 h, Functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 150 mm, turning diameter: 250 mm, TECHNICAL DETAILS Machine type Vertical turning machine with 2 moving turning spindles and 2 tool turrets Operating hours Operating hours: approx. 8,500 h Machine cycles: 497,000 Control system Dob Hnsu Nhc Ro Sxmokl Siemens 840D Spindle Spindle nose size: A6 DIN55026 with Schunk D260 mm Max. Speed: 4,500 rpm Drive power: 12.5 kW Working range Max. Turning length: 150 mm Max. turning diameter: 250 mm Cross slide Axes: X and Z-axis Tool holder: VDI40 according to DIN69880 Number of stations per turret: 8 Workpiece feed Conveyor belt type: Rectangular table for approx. 30 flanges, diameter 200 mm, approx. 150 kg Workpiece handling: Servo-pneumatic lifting axis for feeding and returning the workpieces to the clamping device Special functions Production of identical workpieces on both spindles or of two different workpieces possible Turning device with gripper diameter 250 mm, installed between 1st and 2nd spindle Finished part storage Type: Rotary table with diameter 1,500 mm for approx. 30 flanges, diameter 200 mm, approx. 150 kg EQUIPMENT Chip conveyor with coolant tank

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 3,740 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Number of axes: 4 processing axes + A-axis Spindle power: 15 kW Model: HSK F63 Working surface In X (single processing, workpiece length): 3,740 mm Dob Hn Ssvwatysxmekl In X (pendulum processing, workpiece length): 1,830 mm In Y (workpiece width): 1,550 mm In Z (workpiece thickness): 300 mm Work tables: Double Use of tables: simultaneous or alternating Feeding system Model: HOMAG OPTIMAT TBP 370 gantry loader Type of feeding: Automatic panel feeding through spreader beam Usable dimensions: Panel width: 400 - 1,600 mm Panel length: 400 - 2,000 mm Panel thickness: 16 - 36 mm Maximum panel weight: 60 kg Drilling group Total number of spindles: 16 Number of vertical spindles: 12 Number of horizontal spindles: 2 + 2 Tool magazine Turret: 12 positions

Condition: excellent (used), Year of construction: 2021, operating hours: 505 h, Functionality: fully functional, machine/vehicle number: DW126K - 42, The multitool - breaking, crushing, feeding, dosing, cutting, bag opening, dissolving HIGHLIGHTS - Universal single-shaft shredder for smaller volume flows and special batches - Flexibly adaptable and unrivaled versatility - BROADEST APPLICATION SPECTRUM IN ITS CLASS - Hydraulic direct drive for on-demand performance and interference-resistant operation - Economical and ecological diesel engine - Robust, durable components - Low operating costs - The entire shredding system can be changed directly on site in just 45 minutes - Bolt-on tools for quick tool replacement using the patented Dopp-Lock® system - HydraulicDirect Drive for demand-oriented performance and highly interference-resistant operation - smart handling throughout - impressive simplicity in design, maintenance and operation TECHNICAL DETAILS Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 hp) Emission standard: Stage V Tank capacity: 300 l Roller Diameter: 600 mm (L) Speed: 33 rpm Number of teeth: 8 Feed hopper Loading height: 3,124 mm Rear conveyor Width: 1,000 mm Length: 6,900 mm Dkebovgwbye Hn Sxmjl Discharge height: 4,184 mm Conveyor speed: Adjustable from 1 m/s to 4 m/s MACHINE DETAILS Total weight: 16,300 kg Chassis: crawler chassis, 2 speeds, 400mm 3-web Working position Length: 11,293 mm Width: 2,545 mm Height: 4,184 mm Transport dimensions Length: 7,820 mm Width: 2,545 mm Height: 3,231 mm EQUIPMENT - Electro-hydraulic pump, for operation when the engine is at a standstill - Auxiliary hydraulics 70 l/min - Size L shredding package - Overbelt magnet - Large radio remote control - Maintenance-friendly engine compartment with LED light - Folding hopper with position sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange - Quick roller change system on the roller - Quick-change roller system on the machine

Year of construction: 2006, operating hours: 44,825 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 1167000036, TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 800 mm B-axis: 360º B-axis step size: 0.001º spindle speed: max. 10.000 rpm spindle drive power: 30/20 kW (40%/100% ED) CNC control: SIEMENS 840D Powerline ShopMill Classic number of pallets: 2 pallet dimension: 500 x 500 mm workpiece diameter: 800 mm workpiece height: max. 1.350 mm tool holder: SK-40 number of tools in magazine: 45 MACHINE DETAILS hours under power: 64.431 h Spindle working time: 44.825 h Total power consumption: 60 kVA Supply voltage: 400 V / 50 Hz Connected current: 100 A Dksb Hn Selu Ex Rjxmel Coolant supply: 40 bar Tank capacity: 980 l EQUIPMENT - chip conveyor - rotating sight glasses - operating mode 4 - high pressure pump - Laser tool measurement for measuring tool length and diameter - Prepared for HEIDENHAIN probe

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, The granulating machine is efficient and separates copper from plastic casings. Condition: Well maintained, fully serviced, ready for use Dksb Hn Sjvr A Upexmjl No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Output of copper granulate: front Output of plastic granulate: rear Area of application: precise recycling of copper cables Capacity: 600 - 800 kg/h (with standard feed) Knives: 25 rotating, 2 fixed MACHINE DETAILS Dimensions (L x W x H): 200 x 400 x 305 mm Engine power: 45 kW (60 HP) Weight: 5,500 kg EQUIPMENT - newly sharpened knives - new wire mesh filter

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rotational speed (min.): 35 rpm, rotational speed (max.): 6,000 rpm, number of slots in tool magazine: 60, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Travel distance - x: 1,000 mm Travel - y: 850 mm Travel - z: 750 mm Spindle speed: 35 - 6,000 rpm Number of places in the tool changer: 60 Deb Hjuf Tprsn Sxmekl Table dimensions - longitudinal: 630 x 630 mm Control: FANUC16i EQUIPMENT - with IKZ - chip conveyor. - NC rotary table 360,000 x 0.001°

Condition: ready for operation (used), Year of construction: 2004, operating hours: 14,354 h, Functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,170 mm, number of slots in tool magazine: 84, swivel angle B-axis (max.): 210 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Swing diameter over bed: 550 mm Swing diameter over cross slide: 530 mm Control system: OKUMA OSP-U100L Travel distance - x1: 475 mm Travel distance - x2: 160 mm Travel path - z1: 1,170 mm Travel distance - z2: 1,155 mm Travel path - y: 160 mm C-axis: 360° B-axis: 210° Number of positions in the tool changer: 84 Number of holders in the turret head: 12 Dksb Hneuf Tlgo Sxmol MACHINE DETAILS Dimensions: 4,320 x 2,645 x 2,900 mm Machine weight: 12,500 kg Spindle hours: 14,354 h Switch-on time: 70,794 h EQUIPMENT - with palletizing system and robot handling

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 710 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Travel distance - x: 140 mm Travel - z: 710 mm Control: Siemens C 200-4 Main spindle speed: 5,000 rpm Passage diameter: 65 mm Number of slots in the tool changer: 2 x 12 slots MACHINE DETAILS Rated power: 47 kW Operating voltage: 400 V, 50 Hz Mass of cabinet: 610 kg Machine mass: 6550 kg EQUIPMENT - 2 turrets Dkjb Hn Sxeuf Tdpemel - Tailstock - Bar loader: Index MBL 65 - Passive tool holder

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,300 h, Functionality: fully functional, machine/vehicle number: W09268227L2D380007, Mobile shredding plant as a semi-trailer chassis HIGHLIGHTS - SMART HOPPER - Extended feed range and automatic adjustment of the material feed to the performance of the shredding system. - VARIODIRECT DRIVE - The newly developed and patented VarioDirect Drive ensures stepless and variable power transmission directly to the shredding drum. - MULTI TOOL CONCEPT - Use of the shredding tools with the Dopp-Lock® system from the other slow-speed machines in sizes M and L, including the new limiter generation. - INNOVATIVE HOUSING CONCEPT - All doors open upwards for optimum accessibility. The GRP doors with their large air intakes ensure optimum ventilation and also reduce noise emissions. - EASY ACCESS CONCEPT - The comb flap, which opens up to 90°, makes it much easier to access the entire shredding chamber. This increases occupational safety and availability, even after service work. TECHNICAL DETAILS Area of application: Waste wood processing, mixed construction site waste, commercial waste Main areas of application due to roller size: Green waste / waste wood / waste / roots Drive type: Diesel Roller drum length: 2,200 mm Roller diameter: 600 mm Roller speed: 2 - 28 rpm Number of teeth/comb teeth: 20 / 14 Tooth height: 174 mm Lower belt dimensions: 0.8 x 2.9 m Underbelt speed: 1.3 - 2.9 m/s Rear belt dimensions: 1.0 x 4.9 m Tail conveyor speed: 1.25 x 3.0 m/s Discharge height: 3,162 mm Dkjb Hstu Tv Uen Sxmsl Loading height: 3,390 mm MACHINE DETAILS Permissible total mass: 27 t Tare weight: 18 t Transport dimensions: 7673 x 2530 x 3604 mm Maximum working dimensions: 11.5 x 2.5 x 6.6 m Track width: 2090 mm Collision protection: 2500 mm Maximum driving speed: 80 km/h Engine: MTU-DM 6R1000 Daimler OM 936 Rated power: 260 kW Emission standard: EuroMot V Displacement: 7,700 cm³ Tank size: 500 l EQUIPMENT - 2-axle semi-trailer chassis unit - Neodymium overband magnet - Irrigation - Size L shredding system

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, CNC turning and milling center | INDEX - ABC equipped with bar loader. Dksbeuf Tbuo Hn Sxmjl TECHNICAL DETAILS Control: INDEX C200 - 4D Rated power: 33kW Operating voltage: 400 V, 50 Hz Machine mass: 2500 kg Weight of cabinet: 460 kg

Condition: used, Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, Moving column milling machine | IBARMIA - ZV-58 / L6000 TECHNICAL DETAILS Travel distance: x 6,000 mm Travel distance: y 1,000 mm Travel distance: z 800 mm Heidenhain control: iTNC530 Distance vertical spindle / table: 1,000 mm Table size: 3,300 x 1,050 mm Number of T-slots: 7 T-slots - width: 125 MACHINE DETAILS Dkebouf Tbbe Hn Sxmsl Weight: 33500 kg Volt: 400 Hz: 50 Kw: 65 EQUIPMENT - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw measuring probe

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Travel x-axis: 760 mm Travel distance y-axis: 510 mm Dobsuf S Uyo Hn Sxmskl z-axis travel: 610 mm Control for program: Ultimax 4 Speed: 10,000 rpm Number of places in the tool changer: 24 Tool holder: SK40 Table size: 1,020 x 510 mm

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, turning length: 600 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 635 mm, bar passage: 65 mm, C-axis with driven tool stations TECHNICAL DETAILS Rotation diameter: max. 505 mm turning diameter: max. 320 mm turning length: 600 mm Control: HEIDENHAIN - 4290 DP Speed range: 5,000 rpm Dkjb Hnjuf S Slo Sxmol Travel distance - x: 250 mm Travel distance - z: 635 mm Bar capacity: 65 mm Number of places in the tool changer: 12 Tool holder: VDI 30 MACHINE DETAILS Dimensions: 4,296 x 1,715 x 1,770 mm Machine weight: 4,500 kg