Second-hand machinery for sale (2,431)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 7,309 h, Functionality: fully functional, machine/vehicle number: 2301-0141, turning diameter: 33 mm, spindle speed (max.): 8,000 rpm, Equipped with C-axis for main and counter spindle as well as bar loader Iemca TECHNICAL DETAILS Dslieuf S I Honrppskl Turning diameter: max. 33 mm Speed: 8,000 rpm Number of axes: 8 pieces Control: FANUC Collet holder: for main and pick-up spindle Fixed tools: 5 positions 16x16 tool holder for slide 1 Rotating tools: 3 driven tools on slide 1 with ESX16 spindles Drive for rotating tools: Slide 2 Rotating tool speed: 6,000 rpm Tool holder: 4-fold tool holder Ø32mm MACHINE DETAILS Dimensions: 4,020 x 1,850 x 1,925 mm Machine weight: approx. 4,200 kg Connected load: 34 kVA Operating voltage: 400 V, 50 Hz Bar loader: IEMCA BOSS 545-E EQUIPMENT - Chip conveyor h=1100 mm - Pneumatic ejector and unloading system with belt - Cleaning system for counter spindle - collet chuck - Mechanical preparation for oil mist filter - Electrical and software preparation for bar loader - Synchronization between main and counter spindle - Constant cutting speed and rigid thread cutting - Spindle speed control - Piece/time counter - Software for bar feed in overlapped time - Load Monitor Software (Tool Effort Management) - Instructions

Year of construction: 2005, Condition: good (used), Functionality: fully functional, fuel type: diesel, TECHNICAL DETAILS load capacity: 9550 kg Tires: L 6 Drive: Diesel MACHINE DETAILS own weight: 19,9 t engine: Perkins, 134 kW Transmission type: W Djlinrepq R Tkeppjkl

Year of construction: 2007, Condition: good (used), Functionality: fully functional, fuel type: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity/load: 4,99 t load center: 500 mm load distance: 535 mm Wheelbase: 2078 mm Lifting speed: 0.49 / 0.53 m/s Lowering speed: 0.54 / 0.51 m/s Axle load with load front/rear: 10355 / 1215 kg Axle load without load front/rear: 2880 / 3700 kg Tires: SE Tire size front: 315 / 70-15 (300-15) Tire size rear: 250 / 70-15 (250-15) Track width front: 1190 mm Track width rear: 1122 mm Turning radius: 2745 mm Inclination mast / fork carriage: 5,0 / 9,0°. Height of mast retracted: 2421 mm Height of mast when extended: 3916 mm Height above protective roof: 2416 mm Free stroke: 150 mm Lift: 3000 mm Dkolijpq R Hlsnrppol MACHINE DETAILS weight: 6580 length: 4116 mm width: 1448 mm Engine: VW CPYA; 55 kW Consumption: 4,6 l/h Driving speed: 24 km/h Tractive force with/without load: 25285 / 22375 N

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, sheet thickness (max.): 6 mm, total width: 31,900 mm, TECHNICAL DETAILS Sheet width: 3,190 mm Sheet thickness: 6.3 mm Stand width: 3,200 mm Stop depth: 5 - 1,000 mm Stroke rate: 30 - 50 1/min Cutting angle: 1.2° Control system: RAS System 2005 Space requirement: approx. 3.83 x 3.82 m EQUIPMENT Dkslinst Ahl Rjrppsl - Small parts diverter - Automatic cutting gap adjustment - Scrap separation - Return-to-sender - Cutting technology: oscillating cut - Documentation

Condition: good (used), Year of construction: 2003, Functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, injection pressure: 1.632 bar, overall weight: 76,500 kg, TECHNICAL DETAILS Closing side Drive type: fully hydraulic Closing type: Fully hydraulic Construction: four-bar Closing force: 10,000 kN Panel size (h x v): 1,960 mm x 1,690 mm Beam dimensions (h x v): 1,120 mm x 1,400 mm Installation height: 550 mm / 1,020 mm Opening travel: 1,000 mm Panel spacing: 2,120 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering D movable plate: 250 mm Centering D fixed platen: 315 mm Threaded hole for clamping plates: M24 Dimensions (LxWxH): 11.60 m x 2.90 m x 2.50 m Total weight: 76,500 kg Injection side Screw diameter: 120 mm Stroke volume: 5,655 cm³ Injection pressure: 1,632 bar L/D ratio: 22 Dolsu R Nttjinrppekl Screw geometry: 9 L/D Screw stroke: 500 mm Screw speed: 130 1/min Plasticizing flow: 144 g/s PS Injection flow into the atmosphere: 1,144 cm³/s Number of heating zones: 8 Nozzle delivery force: 226 Pump drive power: 110 kW Heating power: 81 kW Oil tank capacity: 1,520 l EQUIPMENT On-screen text in German Compact flash drive Hydraulic core pull 4x Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler mold heating 16x

Condition: ready for operation (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: FA2097, turning length: 135 mm, spindle speed (max.): 15,000 rpm, turning diameter: 12 mm, TECHNICAL DETAILS Max. machining diameter: 12 mm Max. machining length: 135 mm Number of axes: 6 + 2 Main spindle: Z1 + C1 Vertical holder: X1 / Y1 Main spindle Max. drilling diameter: 8 mm Max. tapping diameter: M6 Spindle passage diameter: 20 mm Speed with/without guide bush: max. 15,000 / 12,000 rpm Gripping spindle Max. clamping diameter: 12 mm Max. overhang length: 80 mm Max. overhang length over workpiece: 30 mm Max. drilling diameter: 8 mm Max. tapping diameter: M6 Speed: max. 12,000 rpm Tools in the vertical holder Max. drilling diameter: 5 mm Max. tapping diameter: M4 Speed: max. 10,000 rpm Driven tools for back machining Max. drilling diameter: 5 mm Max. tapping diameter: M4 Speed: max. 9,000 rpm Tool capacities Vertical holder 1 turning tools: 7 x 12 mm Driven tools on the vertical holder: 4 Drilling tools: 2 Driven tools on the back machining: 8 (4 fixed + 4 rotating) Tool dimensions Turning tools: 12 mm Drill sleeves: 19.05 mm MACHINE DETAILS Power: 6.6 kVA Voltage: 400 V Own weight: 2,300 kg Dimensions: 1,840 x 970 x 1,710 mm Dslovyhxpeinrppekl EQUIPMENT - CNC control Meldas 70M - Siemens control panel Logi TDE (year of manufacture. 2022) - Integrated coolant treatment with filter system - LNS bar magazine Tryton / Barfeeder (year of manufacture 2022) - Büchele pressure booster system SFB-200 Small

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, Functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, injection pressure: 2.387 bar, overall weight: 15,000 kg, TECHNICAL DETAILS Closing side Drive type: fully electric Closing type: Fully hydraulic Construction: four-bar Closing force: 2,500 kN Panel size (h x v): 995 mm x 1,050 mm Beam dimensions (h x v): 630 mm x 630 mm Installation height: min. 330 mm, max. 0 mm Opening travel: 820 mm Plate distance: max. 1,150 mm Rotary table size D: 0 mm Ejector stroke: 200 mm Ejector force: 58 kN Centering D moving platen: 160 mm Centering D fixed platen: 160 mm Threaded hole for clamping platens: M20 Mold weight: 3,430 kg Dimensions (LxWxH): 6.50 m x 2.20 m x 2.30 m Total weight: 15,000 kg Spray side Screw diameter: 55 mm Stroke volume: 570 cm³ Injection pressure: 2,387 bar L/D ratio: 22 Screw geometry: 9 L/D Screw diameter: 55 mm Screw speed: 260 1/min Screw torque: 82.4 Nm Plasticizing flow: 49 g/s PS Injection flow into the atmosphere: 126 cm³/s Number of heating zones: 6 Nozzle contact force: 60 kN Nozzle travel: 82.4 mm Pump drive power: 45 kW Heating power: 23 kW Delinsu R Nuwjrppskl Voltage: 400 V / 50 Hz Oil tank capacity: 720 l EQUIPMENT 2x temperature control point for hot runner On-screen text in German CEE socket 16A Pressure accumulator for increased injection performance Ejector or core pull parallel Core pull hydraulic 1x Air valve 4x Machine with material straightener Machine with water battery Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Low-wear plasticizing unit

Condition: good (used), Year of construction: 2004, Functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, injection pressure: 1.441 bar, TECHNICAL DETAILS Closing side Drive type: fully hydraulic Closing type: Fully hydraulic Construction: tie-bar-less Closing force: 3,500 kN Panel size (h x v): 1,050 mm x 980 mm Tie bar dimension (h x v): 0 mm x 0 mm Installation height: 350 mm / 0 mm Opening travel: 950 mm Plate spacing: 1,300 mm Rotary table size D: - Ejector stroke: 250 mm Ejector force: 83 kN Mold weight: 2,500 kg Dimensions (LxWxH): 7.98 m x 2.22 m x 2.57 m Total weight: 30,750 kg Injection side Screw diameter: 70 mm Stroke volume: 1,039 cm³ Injection pressure: 1,441 bar L/D ratio: 20 Screw geometry: 9 Screw stroke: 270 mm Screw speed: 226 1/min Injection flow into the atmosphere: 386 cm³/s Djliju R Npusnrppokl Number of heating zones: 5 Pump drive power: 45 kW Heating output: 29 kW EQUIPMENT On-screen text in German Machine including conveyor belt Machine including handling Machine including protective housing Machine without material leveler Leveling elements

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, injection pressure: 1.904 bar, overall weight: 10,900 kg, pressure: 1.904 bar, TECHNICAL DETAILS Operating hours Operating hours: 9,585 h Closing side Drive type: Hybrid Closing type: Toggle lever Construction: four-bar Dsliju R I N Tsnrppskl Closing force: 1,600 kN Panel size (h x v): 710 mm x 660 mm Rail dimensions (h x v): 520 mm x 470 mm Installation height: 200 mm / 600 mm Opening stroke: 1,050 mm Ejector stroke: 150 mm Ejector force: 33 Nm Centering D movable plate: 120 mm Centering D fixed plate: 120 mm Dimensions (LxWxH): 6,700 mm x 1,600 mm x 2,300 mm Total weight: 10,900 kg Injection side Screw diameter: 55 mm Stroke volume: 523 cm³ Injection pressure: 1,904 bar L/D ratio: 18 Screw geometry: 9 Screw speed: 243 1/min Screw torque: 827 Nm Plasticizing system: 43 g/s PS Injection flow into the atmosphere: 297 cm³/s Number of heating zones: 6 Nozzle delivery force: 50 kN Voltage: 400 V / 50 Hz EQUIPMENT On-screen text in German CEE socket outlet 16A CEE socket 32A Pressure accumulator for increased injection capacity 3 freely programmable inputs and outputs each Core pull pneumatic 2x Machine with water battery Machine without material hopper Leveling elements Interface for deaerator Interface for temperature control unit USB interface Schuko socket 10A Low-wear plasticizing unit mold heating 24x

Condition: good (used), Year of construction: 2003, operating hours: 47,000 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, injection pressure: 2.05 bar, overall weight: 4,410 kg, TECHNICAL DETAILS Operating hours Operating hours: 47,000 h Closing side Drive type: Fully hydraulic Closing type: Fully hydraulic Construction: four-bar Dkslinsu R Igxerppjl Closing force: 1,500 kN Panel size (h x v): 650 mm x 650 mm Beam dimensions (h x v): 470 mm x 470 mm Installation height: 250 mm / 0 mm Opening path: 500 mm Plate spacing: 750 mm Rotary table size D: 0 mm Ejector stroke: 225 mm Ejector force: 66 kN Centering D moving platen: 125 mm Centering D fixed platen: 125 mm Threaded hole for clamping platens: M12 Mold weight: - Dimensions (LxWxH): 4,470 mm x 1,670 mm x 2,180 mm Total weight: 4,410 kg Injection side Screw diameter: 40 mm Stroke volume: 182 cm³ Injection pressure: 2,050 bar L/D ratio: 20 Screw geometry: 9 Screw stroke: 145 mm Number of heating zones: 4 Nozzle delivery force: 45 kN Nozzle travel: 400 mm Pump drive power: 22 kW Oil tank capacity: 250 l EQUIPMENT On-screen text in German Machine without material hopper Leveling elements

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 188220388, grinding length: 2,000 mm, grinding width: 750 mm, grinding height: 550 mm, table length: 2,500 mm, table width: 740 mm, TECHNICAL DETAILS Control: conventional Dkolievvty Dsnrppol Grinding width: max. 750 mm Grinding height: 550 mm Grinding length: max. 2000 mm Magnetic clamping surface: 2500 x 740 mm MACHINE DETAILS Operating voltage: 3 x 380V, 50 Hz Total power requirement: 50 kW Machine weight: approx. 18 t

Condition: good (used), Year of construction: 2010, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: FAGOR, controller model: 8055i/Plus MC, rotational speed (max.): 10,000 rpm, overall weight: 8,100 kg, TECHNICAL DETAILS Control unit Control unit: Fagor 8055i/PLUS MC Spindle Spindle holder: BT40 Spindle speed: 10,000 1/min Table size Table size: 1,500 x 660 mm Traverse paths Travel X: 1,300 mm Travel Y: 710 mm Travel Z: 710 mm Machine weight Machine weight: approx. 8,100 kg EQUIPMENT Increased drive power 15/18 kW Chip conveyor with chip cart, ejection height 1,250 mm "Wash down" chip flushing system Djlsu Ni Nxoinrppskl 32-slot tool changer Spindle oil cooling HBO-250 Internal cooling with 20 bar high-pressure pump Hydraulics for clamping device Oil mist separator (see picture)

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, turning length: 595 mm, spindle speed (max.): 4,500 rpm, bar passage: 62 mm, Equipment: chip conveyor, TECHNICAL DETAILS Control: FANUC 18i-TB Speed: 4,500 rpm Bar capacity: 62 mm Working area Number of axes: 4 (X, Z, C, B) Turning length: 595 mm Counter spindle: available Tools and turrets Turret positions: 12 pcs Equipment Coolant system: Powercool Bar loader: LNS Quickload Servo 3 EQUIPMENT - Driven tool stations - Finished part removal system - Conveyor belt - Chip conveyor Djlinovvuddsrppjkl - Steel holder - Clamp holder - Collets

Condition: good (used), Year of construction: 1998, operating hours: 16,455 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, Application by CW02/25 at the latest - submission of bids obligates timely application. TECHNICAL DETAILS Operating hours: 16,454.39 h Control system: SINUMERIK 840D Drives: SIMODRIVE 611D Dkelieu Ni Ibenrppsl Working range X-axis travel: 3,000 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Spindle Spindle holder: HSK 63 Spindle speed: max. 16,000 1/min Tool magazine Number of tool positions: 90 Internal cooling Coolant pressure: 40 bar Transportation Transport weight: 22,000 kg The machine has an oil mist separator. The machine comes with a new X-axis spindle with ball nut, newly manufactured in 2024 for €20,000

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 2188, turning length: 800 mm, turning diameter: 550 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 10 rpm, quill stroke: 150 mm, bar passage: 91 mm, Modernization in 2006 TECHNICAL DETAILS Control: FANUC 18-i TB Speed: 10 - 2,800 rpm Turning diameter: 550 mm Turning length: 800 mm Swing diameter: 800 mm Bar passage: 91 mm Chuck diameter: 450 mm Tailstock diameter: 120 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock quill stroke: 150 mm Number of tool stations: 12 MACHINE DETAILS Total power requirement: 44 kW Machine weight: 8 t Dkelijvvubvenrppjl

Condition: good (used), Year of construction: 2000, Functionality: fully functional, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, rotational speed (max.): 16,000 rpm, coolant supply: 40 bar, Application by CW02/25 at the latest - submission of bids obligates timely application. TECHNICAL DETAILS Model: HS500 Year of construction: 2000 Working area Number of working areas: 2 X-axis travel: 500 mm each Y-axis travel: 500 mm each Z-axis travel: 500 mm each Dkelinsu Ni Hkerppjl Spindle Spindle holder: HSK 63 Spindle speed: max. 16,000 1/min Tool magazine Number of tool magazines: 3 Tool slots per magazine: 90 Total number of tool positions: 270 Internal cooling Coolant pressure: 40 bar EQUIPMENT 7-fold pallet changer Radio measuring probe Oil mist separator Extended tool breakage monitoring (load cell) Control system: SINUMERIK 840D

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, turning length: 550 mm, turning diameter: 400 mm, spindle speed (max.): 5,000 rpm, controller manufacturer: Siemens, controller model: 810 D ShopTurn, number of slots in tool magazine: 9, TECHNICAL DETAILS Control: Siemens 810 D ShopTurn Turning diameter: 280/400 mm Spindle speed (max.): 5,000 rpm Turning length: 550 mm Tools Tool holder type: steel holder, 9 pieces Tool holder: VDI 30 Dkelinrsvvuaxeppjl Turret positions: 12 pieces EQUIPMENT - Driven tool stations - Oil mist extraction - Coolant system - Cabin with extraction, Donaldson Tirit DCE brand - Three-jaw chuck, Schunk brand

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, turning diameter: 520 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, spindle diameter: 78 mm, distance between centers: 1,110 mm, TECHNICAL DATA Dkolijvvt Uusnrppol Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Turning diameter: 520 mm Turning diameter over support: 150 mm Spindle speeds: 25 - 4,500 rpm Spindle bore: 78 mm Tool holder: VDI 40 Turret positions: 12 Rapid traverse: 15,000 mm/min Distance between the centers: 1110 mm Spindle motor drive: 18 kW MACHINE DETAILS Machine length: 5,000 mm Machine width: 2,800 mm Machine height: 3,200 mm Machine weight: approx. 14.5 t

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 864 mm, turning diameter: 762 mm, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, bar passage: 76 mm, TECHNICAL DETAILS Bar capacity: 76 mm Turning diameter: 762 mm Dkelinrovvt Uboppsl Turning length: 864 mm Swing diameter: 762 mm Gearboxes and speeds Gear stage 1 Speed range: 3,400 rpm Axes X-axis travel: 287 mm Z-axis travel: 864 mm Lathe chuck Maximum lathe chuck diameter: 254 mm Tools Number of tools in the chain magazine: 12 MACHINE DETAILS Power: 22 kW Machine length: 3,300 mm Machine width: 2,000 mm Machine height: 2,000 mm Machine weight: approx. 7.2 t

Condition: used, Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 081222125 - 178/06, center width: 3,000 mm, turning diameter over bed slide: 830 mm, quill stroke: 200 mm, feed length X-axis: 455 mm, feed length Z-axis: 2,850 mm, rotational speed (max.): 1,600 rpm, TECHNICAL DETAILS Turning diameter: 630 mm X - stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Center distance: 3000 mm Spindle head: DIN 55027 - 11x290 Feed force - Z: 23.9 kN Feed force - X: 11.3 kN Rapid traverse speed X-axis: 6.8 m/min Rapid traverse speed Z-axis: 4 m/min Swing diameter over radial slide: 540 mm Max. swing diameter: 830 mm Travel path of the cross slide: 450 mm Spindle head max. passage for rolled material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outer diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner taper: MK6 type Hydraulic tank: 15 l Coolant tank: 220 l Coolant tank for chip conveyor: 160 l Spindle stages Gear 1: 1 - 225 rpm Gear 2: 5 - 560 rpm Gear 3: 7 - 900 rpm Gear 4: 18 - 1600 rpm MACHINE DETAILS Machine length: 5200 mm Machine width: 2110 mm Machine height: 1995 mm Dkslinjvvt Rijrppjl Machine weight: approx. 6.850 t - Without chip conveyor and coolant tank

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, turning diameter over cross slide: 880 mm, turning diameter: 630 mm, turning length: 3,000 mm, quill stroke: 180 mm, quill diameter: 72 mm, TECHNICAL DETAILS Quill stroke: 180 mm Tailstock quill diameter: 72 mm Turning diameter and turning length Turning diameter: 630 mm Turning length: 3,000 mm Dslinrpovvt Izepokl Turning diameter over bed: 620 mm Turning diameter over cross slide: 880 mm Axes Cross travel (X-axis): 365 mm

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, TECHNICAL DETAILS Dslinrpevvt Hwepjkl Work spindles: 6

Condition: ready for operation (used), Year of construction: 2015, operating hours: 75,134 h, Functionality: fully functional, TECHNICAL DETAILS Work spindles: 6 MACHINE DETAILS Series / number: 3 / 1 Weight: 6.6 t Dkelinrpjvvt Eyjpsl Electrical connection: 3 NPE, 50 Hz, 400 V Power consumption: 35 kW

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 315 mm, chuck outer diameter: 445 mm, spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 320 mm, Equipment: documentation/manual, Tools in the pictures are included in the scope of delivery. TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 D Speed: 4000 rpm Swing diameter: 450 mm Travel path - X: 850 mm Travel path - Y: 315 mm Travel path - Z: 315 mm Rapid traverse speed X-axis: 45 m/min Rapid traverse speed Z-axis: 45 m/min Lathe chuck diameter, max.: 445 mm Turret positions: 12 pieces Holder: VDI50 Workpiece diameter: 270/320 mm EQUIPMENT - EMAG disk turret Djlinjvvt D Asrppskl - 12x VDI 50 for driven tools - Documentation available

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, travel distance X-axis: 626 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 5,500 rpm, workpiece diameter (max.): 260 mm, Equipment: documentation/manual, Tools in the pictures are included in the sale. TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm Travel path - X: 626 mm Travel path - Z: 250 mm Spindle bearing diameter: 32 mm Nominal speed: 1,200 rpm Rapid traverse speed X-axis: 60 m/min Djlovvt A Soinrppekl Rapid traverse speed Z-axis: 30 m/min Turret positions: 12 pieces MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - Pallet conveyor WPS - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available