Second-hand machinery for sale (2,431)

Condition: ready for operation (used), Year of construction: 1974, Functionality: fully functional, machine/vehicle number: 1430/451, center height: 125 mm, grinding length: 1,000 mm, center width: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 250 mm, grinding spindle speed: 1,700 rpm, TECHNICAL DETAILS Grinding length: 1000 mm Grinding diameter: 250 mm Table speed / hydraulic: 6 m/min Grinding wheel (surface grinding diameter x width x hole): 400 x 50 x 127 mm Grinding wheel head swivels: 270 ° Rotating head swivels: 360 ° Grinding wheel speed range: 1020 - 1700 rpm Infinitely variable speeds: 20 - 400 rpm Max. inclination of the table: 9 degrees Center distance: 1000 mm Center height: 125 mm MACHINE DETAILS Machine length: approx. 3000 mm Machine width: approx. 1700 mm Dolqwajvvtydjiwokl Machine height: approx. 1400 mm Machine weight: approx. 2.2 t

Condition: ready for operation (used), Year of construction: 2000, operating hours: 60,240 h, Functionality: fully functional, turning length: 1,000 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 88 mm, travel distance X-axis: 340 mm, travel distance Y-axis: 70 mm, TECHNICAL DETAILS Control unit: Fusion 640 MT Turning diameter: 610 mm Turning length: 1,000 mm Spindle bore diameter: 88 mm Spindle speed: 0-3,500 1/min Spindle drive: 32 kW Face travel (X): 340 mm Y-travel: ±70 mm Longitudinal travel (Z): 1,000 mm Minimum indexing of the main spindle (C-axis): 0.001° Tool data Tool positions: 40 Spindle speed driven tools: 4,000 1/min Spindle motor driven tools: 4 kW Tool type: KM 63 MACHINE DETAILS Required floor space: 4 x 2.4 x 2.2 m Dkelqwajvi H E Toiwol Weight: 9.6 tons Operating hours spindle 1: 60,240 h Spindle 2 operating hours: 2,791 h EQUIPMENT - Chip conveyor - Jaw chuck with 315 mm diameter - Tailstock

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rotational speed (max.): 12,000 rpm, The main spindle was replaced in 2022! TECHNICAL DETAILS x-travel: 550 mm y-travel: 400 mm z-path: 425 mm Control: Siemens SINUMERIK 840D Spindle speeds: 12,000 rpm Table size (2x): 660 x 400 mm Spindle diameter: 70 mm Dslqwaoukhlyeiwokl Tool holder: HSK 63 Tool changer: 20-fold Feed rates: 1- 60,000 mm/min Rapid feeds: 60,000 mm/min Spindle motor: 14 kW MACHINE DETAILS electr. version - voltage/frequency: 400 / 50 V/Hz Connected load: 32 kVA Machine weight: approx. 7.4 t Space requirement: approx. 4.5 x 2.3 x 2.5 m EQUIPMENT - 20-position tool changer and two work tables in alternation

Year of construction: 2006, Condition: good (used), Functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS pressure: 160 t folding length: 4100 mm column width: 3100 mm Control: DELEM DA66W table width: 120 mm Stroke: max. 800 mm Dolqwjlp Iq Reaiwokl Speed downwards: 80 mm/sec Speed upwards: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS oil capacity: 185 l total power requirement: 24 kW machine weight: approx. 13 t space requirement: approx. 4.8 x 2.2 x 2.2 m

Year of construction: 2005, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 70161, TECHNICAL DETAILS turning diameter: 760 mm turning length: 864 mm turning diameter over bed slide: 450 mm longitudinal travel: 864 mm Dkslqwaisizwwmowel cross slide travel: 287 mm spindle speed (infinitely variable): 0 - 3,400 rpm spindle bore: 105 mm MACHINE DETAILS operating voltage: 400 V Connected load: 28 kVA Space requirement approx. 3.2 x 2 x 2 m EQUIPMENT - 12-fold turret - power chuck - large spindle bore - tool presetting

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 509 2172, Year of construction: 1995, operating hours: 19,000 h, load capacity: 16,000 kg, lifting height: 1,800 mm, load center: 1,200 mm, empty load weight: 21,000 kg, TECHNICAL DETAILS Dolqwevzaldjaiwjkl Lifting height: 1,800 mm (due to a conversion) Load capacity: 16 t Load center of gravity: 1,200 mm Own weight: 21 t Operating hours: approx. 19,000 h

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, table load: 1,700 kg, helix angle: 45 °, working width: 200 mm, machining diameter: 250 mm, spindle stroke: 180 mm, TECHNICAL DETAILS Axes: X / Z / A / B / V / C / C1 / Z1 / Y1 / Y2 / Z3 Hobbing cutter diameter: max. 90 mm Table diameter: 145 mm Module: max. 3 mm Number of teeth: min. 4 Milling head swivel angle: ± 45 ° Resolution accuracy: 0.1 ° Workpiece table load: 17 kN Milling cutter speed: 450 - 4,500 rpm Milling diameter of spur gears/helical gears: 125 Milling width of spur gears/helical gears: 250 mm (axial) Spindle stroke: 180 mm Milling cutter width: max. 200 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Rated current: 55 A Fuse in the supply line: 63 A Dkslqwevvtxgeaiwjl

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,161 h, Functionality: fully functional, travel distance X-axis: 1,625 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, table width: 1,680 mm, table length: 890 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS X-travel: 1,625 mm Y-travel: 860 mm Z-travel: 760 mm Table size: 1,680 x 890 mm Control system: Hurco Ultimax Spindle Spindle diameter: 80 mm Tool holder: SK40 Spindle speed (infinitely variable): 80 - 10,000 rpm Spindle motor power: 15 kW Dkslsvahtgoqwaiwsl Number of positions in the tool changer: 40 Feed rates and rapid feeds Feed rates: 1 - 18,000 mm/min Rapid traverse: 18,000 mm/min MACHINE DETAILS Connected load: 33 kVA Machine weight: approx. 14 t Space requirement: approx. 6 x 4 x 3 m Spindle hours: 21,161 h

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,821 h, Functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 1,500 mm, table length: 660 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, With horizontal axis of rotation TECHNICAL DETAILS X-travel: 1,270 mm Y-travel: 660 mm Z-travel: 610 mm Table size: 1,500 x 660 mm Dkolqwaijvag Snswel Control system: Hurco Ultimax Additional axis: Horizontal rotary axis Spindle Spindle diameter: 80 mm Tool holder: SK40 Spindle speed (infinitely variable): 10 - 10,000 rpm Spindle motor power: 15 kW Number of positions in the tool changer: 24 Feed rates and rapid feeds Feed rates: 1 - 30,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Connected load: 30 kVA Machine weight: approx. 10 t Space requirement: approx. 5 x 3 x 3 m

Condition: good (used), Year of construction: 2001, Functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 1.943 bar, overall weight: 12,400 kg, pressure: 1.943 bar, TECHNICAL DETAILS Closing side Drive type: fully hydraulic Dslqwaiju R Nagowjkl Closing type: fully hydraulic Construction: four-bar Closing force: 2,700 kN Panel size (h x v): 900 mm x 1,000 mm Beam dimensions (h x v): 630 mm x 630 mm Installation height: 250 mm / 620 mm Opening travel: 550 mm Panel distance: 1,270 mm Ejector stroke: 160 mm Ejector force: 67 Nm Centering D movable plate: 160 mm Centering D fixed platen: 160 mm Threaded hole for clamping plates: M20 Dimensions (LxWxH): 6,400 mm x 2,010 mm x 2,300 mm Total weight: 12,400 kg Injection side Screw diameter: 55 mm Stroke volume: 522 cm³ Injection pressure: 1,943 bar L/D ratio: 20 Screw stroke: 220 mm Screw speed: 285 1/min Screw torque: 1,620 Nm Plasticizing flow: 49 g/s PS Injection flow into the atmosphere: 262 cm³/s Number of heating zones: 4 Nozzle delivery force: 106 kN Pump drive power: 45 kW Voltage: 400 V / 50 Hz Oil tank capacity: 630 l EQUIPMENT On-screen text in German CEE socket 16A Hydraulic core pull 4x Machine without material hopper Leveling elements Interface for material conveyor Schuko socket 16A Two-component injection molding machine

Condition: good (used), Year of construction: 1998, operating hours: 12,786 h, Functionality: fully functional, Bed milling machine with universal milling head/two-axis milling head with automatic tool clamping TECHNICAL DETAILS Travel X / Y / Z: 1,500 / 1,000 / 1,000 mm Speed range: 30 - 3,500 rpm Drive power: 25 kW Swivel range: 360° Torque: max. 700 Nm (50 % ED) Tool holder: SK 50 Tool changer: Portal Tool positions: 24 Table size: 1,600 x 800 mm Dsletqcq Roqwaiwjkl Feed X / Y / Z: 0.001 - 6 m/min Rapid traverse X / Y / Z: 10 m/min MACHINE DETAILS Connected load: 42 kW Machine weight: 12,500 kg Space requirement (LxWxH): 6.1 x 5.2 x 2.9 m EQUIPMENT - Electronic handwheel - Heidenhain HR - Measuring probe

Year of construction: 2013, Condition: excellent (used), Functionality: fully functional, HIGHLIGHTS - camera system connected to a 19" screen for monitoring the cabin - interchangeable pallet table allows loading and unloading of the machine outside the working area - compact design - smoothing function for small holes and cut-outs for better cutting quality - complete databases for cutting technologies - CAM CONCEPT FINEST Professional software - Significantly lower maintenance costs compared to CO2 laser technology TECHNICAL DETAILS sheet size: 3000 x 1500 mm positioning speed up to 100m/min positioning accuracy +/- 0.03 mm laser source: 2,0 kW cutting capacity steel: max. 17 / 14 mm Dkslqsl D Rp Tewaiwol cutting capacity stainless steel: max. 10 / 5 mm cutting capacity aluminum: max. 8 / 6 mm Cutting power: max. 6 / 5 mm Cabin: with sliding door; complies with laser protection class 1 Control system: ECK-827 (based on Windows XP), multi-process control system Control connections: 2 LCD displays, 4 USB ports, LAN adapter Control functions: simple and intuitive software, diagnostics of machine operation, advanced functions such as scaling, rotation, mirror image of cutouts, database of cutouts, complete databases for cutting technologies Software: CAM CONCEPT FINEST Professional (automation/NC programs, many data interfaces, cutting optimization) Laser source: fiber laser source from the company IPG (Ytterbium Laser YLS 2000) Special features: Fiber optic conduction of the laser beam, low power consumption, low cost of cooling, life expectancy of the source up to approx. 100,000 hrs. Cutting head: PRECITEK Functions: Anti-collision system, error recording system, function of precise positioning, enables quick change of focal length. pallet table: 2 pieces Filter system: noise level

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 085/2007.01, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller model: Andronic 2060PKM, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 500 mm C-axis (table): 360° Control: Andronic 2060PKM Rotary table diameter: 260 mm Spindle Spindle mount: HSK A63 Dkelqevykxrowaiwsl Working spindle speed range: 15,000 rpm Feeds and speed Feed: 1 - 5,000 mm/min Rapid traverse X/Y: 15 m/min Rapid traverse Z: 12 m/min MACHINE DETAILS Machine weight: approx. 6.0 t Control cabinet (L x W x H): 2.4 x 0.6 x 2.2 m Machine (L x W x H): approx. 3.5 x 2.4 x 3.2 m Total power requirement: approx. 42 kW EQUIPMENT - 5-axis parallel kinematics for prototype production

Condition: ready for operation (used), Year of construction: 1993, operating hours: 3,256 h, Functionality: fully functional, sheet thickness (max.): 13 mm, sheet width: 3,150 mm, distance between stands: 3,670 mm, TECHNICAL DETAILS Max. sheet width: 3,150 mm Max. sheet thickness: 13 mm Delqwaisvykwnowskl Stand width: 3,670 mm Blade length: 3,150 mm Holders: 18 pieces Back stop Type: Motorized Travel path: 1,000 mm Positioning: Yes MACHINE DETAILS Height above floor: 850 mm Table size (L x W): 3,770 x 500 mm Machine dimensions (L x W x H): 4.4 x 2.8 x 2.4 m Machine weight: approx. 12.9 t Total power requirement: 30 kW EQUIPMENT - Hydraulic sheet holding device. - Cutting gap lighting - Safety light curtain at the rear - Short stroke and continuous operation possible

Condition: ready for operation (used), Year of construction: 1974, Functionality: fully functional, throat depth: 400 mm, installation height: 400 mm, pressing force: 160 t, ram stroke: 140 mm, TECHNICAL DETAILS Pressure force: 160 t Pillar stroke: 32 - 140 mm Pillar adjustment: 100 mm Stroke rate: 50 strokes/min Thrust: 400 mm Installation height: 400 mm Drawing depth: 63 mm Pressure force at maximum drawing depth: 63 t Adjustment of the ram slide: 100 mm Operating options: single stroke / continuous stroke Operation: foot and hand operation possible Dolqevyix Dewaiwekl Table and work surfaces Table size: 1,000 x 750 mm (without clamping plates) Pillar surface: 850 x 630 mm Tenon hole: 400 x 360 mm MACHINE DETAILS Machine weight: approx. 10.5 t Machine dimensions (L x W x H): 2.9 x 1.25 x 3.3 m Electrical control cabinet (L x W x H): 1.06 x 0.6 x 2.0 m Energy and operating requirements Total power requirement: 15.5 kW Compressed air: 6 kp/cm² Oil filling: approx. 30 liters Power connection: 80A EQUIPMENT - Clamping plates with different dimensions: 1x 1,200 x 760 x 90 mm / 1x 1,200 x 760 x 70 mm - Tenon hole Ø 300 mm

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, throat depth: 625 mm, punching force: 40 t, overall weight: 2,700 kg, stroke distance: 80 mm, TECHNICAL DETAILS Operation: via foot switch Thrust: 625 mm Stroke rate: 34 strokes/min Punching force: 40 t Stroke: 80 mm Shearing station Flat steel cutting: max. 380 x 20 mm / 480 x 15 mm Bevel cutting: max. 120 x 15 mm Holder: adjustable in length to 750 mm Knife cutting edges: 2-way upper knife, 4-way lower knife Profile station Application: processing of round and square profiles, U-profiles, double-T beams, unequal-sided angles Angle steel: - 90° shearing: max. 150 x 15 mm - 45° shearing: max. 80 x 10 mm Profile cutting: - Round steel: max. Ø 50 mm - U-H profile: max. 160 x 90 mm - T profile: max. 120 x 12 mm Dolqwasvyiiieiwekl Punching station Table size: 600 x 600 mm Max. bore: Ø 57 x 12 mm Working stroke: 80 mm Stroke rate: 34 strokes/min Punching pressure: 40 t Stop angle: 200 x 100 mm (L=600 mm) Notching station Table size: 450 x 450 mm Notches/notches Material thickness: 13 mm Notch width: 52 mm Notch depth (V 90°): 70 - 100 mm Angle flange: 100 x 13 mm MACHINE DETAILS Total power requirement: 7.5 kW Machine weight: approx. 2.7 t Machine dimensions (L x W x H): 1.4 x 0.8 x 1.8 m EQUIPMENT - Adjustable hold-down clamp - Reusable cutting edges for longer durability - Accessories available on request

Condition: ready for operation (used), Year of construction: 1990, Functionality: fully functional, wall thickness: 25 mm, overall weight: 2,800 kg, pipe diameter: 42 mm, controller model: RC 7000, TECHNICAL DETAILS Area of application: Processing of deformable pipes, rectangular pipes, round bars and square pipes. Pipe diameter: 42 mm Wall thickness: 2.5 mm Round steel (max.): Ø 20 mm Square material (pipe): 25 x 25 mm Rectangular pipe: 42 x 20 x 2.5 mm Bending performance Max. bending radius (inside): Ø 20 mm Max. bending radius (outside): Ø 170 mm Bending speed: not specified Bending direction: to the left Dkoljvyib Seqwaiwol Pipe lifting length: 3,000 mm Control Software: RC 7000 Programming: Manual Operation: via control panel MACHINE DETAILS Machine weight: approx. 2.8 t Machine dimensions (L x W x H): 5.1 x 0.7 x 2.0 m Control cabinet dimensions (W x D x H): 800 x 700 x 2,000 mm EQUIPMENT - Various bending tools for pipe Ø 25 mm - 12 different collets - Various auxiliary and clamping devices

Condition: ready for operation (used), Year of construction: 1970, Functionality: fully functional, workpiece weight (max.): 800 kg, rotational speed (max.): 3,600 rpm, working length: 2,600 mm, workpiece diameter (max.): 1,250 mm, TECHNICAL DETAILS Purpose: Measuring and balancing static and dynamic imbalance of rotors Max. balancing body weight: 800 kg (with even load distribution, 400 kg per bearing stand) Max. balancing body diameter: 1,250 mm Speed ranges Measuring speed per gear: 1st gear: 190 - 650 rpm 2nd gear: 400 - 1,250 rpm 3rd gear: 700 - 2,100 rpm 4th gear: 1,200 - 3,600 rpm Mechanical specifications Bed length: 2,600 mm Bearing journal diameter (min./max.): 16-95 mm / 95-180 mm Bearing center distance min.: 125 mm Shaft end bearing center max.: 2,070 mm Power transmission: by means of Cardan shaft MACHINE DETAILS Machine dimensions (L x W x H): approx. 3.5 x 1.7 x 2.0 m Control cabinet dimensions (W x D x H): 650 x 250 x 800 mm Machine weight: approx. 1.5 t Voltage: 380 V Drive power: 7.5 kW EQUIPMENT Dolqjvyh Ttswaiwekl - Schenk measuring device with digital display - Manually movable support stands - Accessory package with various rotor shafts and rotor mounts on request

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, bending angle: 75 °, overall weight: 1,000 kg, motor voltage: 380 V, rotational speed (min.): 15 rpm, working height: 850 mm, TECHNICAL DETAILS Max. bending angle: 75° Bending angle options: 40° / 60° / 75° Single and double bending of reinforcing steel: possible Number of bending forms: 2 pieces Bar size Angle form: Ø 12 - 50 mm Double angle: Ø 12 - 35 mm Bending plate Diameter: Ø 480 mm Dkjlqevyhihewaiwsl Speed: 7.5 / 15 rpm Bending pin hole: Ø 48 mm (16 pieces) Center pin: Ø 50 x 94 mm Counterholding strips Number: 2 pieces Length: 840 mm Displacement: per handrail 100 mm Holes: 13 pieces, Ø 48 mm MACHINE DETAILS Dimensions (L x W x H): approx. 1.9 x 2.6 x 1.0 m Transport dimensions (L x W x H): 2.6 x 1.8 x 1.0 m Working height: 850 mm Operating voltage: 380 V Machine weight: approx. 1.0 t EQUIPMENT - Control panel with touch screen - Bending attachments: 2x Ø 60 mm 2x Ø 78 mm 1x Ø 96 mm 1x Ø 122 mm 1x Ø 160 mm 1x Ø 200 mm - 1x pin for plate - 8x counterholders of various shapes - Bending tray

Condition: ready for operation (used), Year of construction: 2006, operating hours: 2,160 h, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 590 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Application: drilling, countersinking, reaming, thread cutting and milling of metal, aluminum, plastic and wood TECHNICAL DETAILS X-axis: 3,200 mm Y-axis: 550 mm Z-axis: 590 mm Control model: Heidenhain iTNC 530 Tool and spindle data Tool holder: SK 40 Speed range (infinitely variable): 100 - 6,000 rpm Feed and speed Rapid traverse range (X/Y/Z): 50 / 25 / 25 m/min Feed speed: 0 - 5,000 mm/min MACHINE DETAILS Machine weight: approx. 7.5 t Machine dimensions (LxWxH): 6.0 x 2.3 x 2.5 m Space requirement (LxWxH): approx. 6.0 x 4.50 x 2.9 m (30 m²) Switch-on hours: approx. 6,529 h Dkslqjvyg Ngjwaiwjl Program running time: approx. 2,160 h Control switch-on time: 10,926 h Interface: 232-C Operating pressure: 7 bar Connection: 3x 400V / 50 Hz Total power requirement: 15 kVA EQUIPMENT - Mineral cast bed - Coolant system (300 liter container) - Position measuring system: rotary encoder / length measuring system - Drives: X-axis (50 m/min) via pinion and rack; Y and Z axis (25 m/min) via ball screw - Central lubrication (manually operated) - Control cabinet with Rittal SK 3303100 cooling unit - Heidenhain path control - Control panel with electronic handwheel - Workpiece clamping using clamping supports (approx. 15 bars) - Hydraulic tool change via control - 4x chip drawers - Various clamping devices and clamping elements - Barrier fence (safety fence) - Knut measuring device

Condition: good (used), Year of construction: 1998, operating hours: 76,296 h, Functionality: fully functional, machine/vehicle number: 030901, turning length: 125 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 350 rpm, turning diameter: 32 mm, controller manufacturer: Fanuc, controller model: Serie 18i Tb, TECHNICAL DETAILS Control: CNC Fanuc 18i Tb Machining diameter: max. 32 mm Maximum workpiece length: 125 mm Headstock travel: 310 mm C-axis indexing: 1° Number of axes: 7 Drilling capacity fixed tool diameter: 13 mm Drilling capacity rotating tool diameter: 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø 10 mm Spindle speeds: 350 - 7000 rpm Dolqovyr Uhewaiwokl MACHINE DETAILS Machine coolant: oil Machine dimensions: 1,700 x 2,512 x 1,700 mm Machine weight: 2,900 kg On-time: approx. 100,000 h Operating hours/cutting time: 76,296 h Part counter: 7,232,548 pieces Bar loading magazine: FMB TURBO 5-42 Bar capacity: 5-42 mm (mounting variant "A") Hinge belt conveyor: MAYFRAN Machine dimensions: approx. 1,700 x 2,512 x 1,700 mm Machine weight: approx. 2,900 kg Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 [mm] Loading magazine weight: approx. 1,800 kg Peripheral & accessory dimensions: approx. 1,900 x 700 x 800 mm Peripheral & accessory weight: approx. 200 kg EQUIPMENT - CE declaration of conformity - Operating tools - Small extinguishing system Kraft und Bauer and extinguishing agent container CO2 (10 kg)

Condition: ready for operation (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: PAC253218601, sheet thickness (max.): 25 mm, cutting length (max.): 3,200 mm, No minimum price - guaranteed sale at the highest bid! Machine type: Hydraulic swing pruning shears Practica (SPECIAL DESIGN) Design: Hydraulic and motorized specially designed for continuous operation TECHNICAL DETAILS Capacity: 3,200 x 25 mm (25 mm mild steel, tensile strength Rm = 420 N/mm²) Cutting angle: 2.5° Number of strokes: approx. 10 / minute Stroke rate for cutting length 3,200 mm: 13 1/min Stroke rate for cutting length 2,000 mm: 17 1/min Stroke rate for cutting length 1,000 mm: 20 1/min Cutting system Blades: Highly tempered for cutting high-strength steels Partial blade lengths: 3 partial lengths of approx. 1 meter Upper blade: 2 cutting edges Bottom blade: 4 cutting edges CNC-controlled cutting gap adjustment: Yes Sheet metal downholder opening: 100 mm (between underside of downholder and bottom knife) Cutting beam opening left: 100 mm (between upper knife and lower knife) Cutting beam opening right: Up to approx. 240 mm Angle stop stroke: approx. 40 mm Heavy-duty ball rollers: 12 pieces MACHINE DETAILS Engine power: 90 kW Additional hydraulic power: 30 kW Total output: 120 kW Control system: Siemens S7-1200, CPU 1215C Digital inputs: 9 Digital outputs: 12 Display: 9 inch touch screen Hydraulic components: Bosch-Rexroth Dolqwaieulwgvjwekl Machine body dimensions (LxWxH): approx. 4,200 x 2,450 x 2,500 mm Weight: approx. 30 tons EQUIPMENT - Heavy-duty support arm / angle fence, manually adjustable in width on linear guide, equipped with automatically retractable angle fence - Length (measured from the cutting edge): 2,000 mm - T-slot on both sides to accommodate stop cams - Oil cooler - Special version for high-speed cutting - Machine frame in special design (approx. 30 tons instead of 22.5) - Adaptations/special hydraulics with additional hydraulic unit with separate motor and pump - Separate oil cooler - Control system enables manual or robot operation

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter: 20 mm, number of slots in tool magazine: 19, TECHNICAL DETAILS Control: Fanuc, 18i-T series Axis configuration: 7 (X / Z / Y / C1 / X1 / Z1 / C2) Max. bar diameter: 20 mm Dkelqovyrqpowaiwsl Max. turning length: 205 mm Spindle data Main spindle speed: 10,000 rpm C-axis indexing: 0.001° Counter spindle accessories: collet Counter spindle speed: 8,000 rpm C-axis indexing: available Tool configuration Total number of tool holders: 19 pieces Construction: linear tool holder, front attachment, rear machining EQUIPMENT - Integrated extinguishing system from Kraft & Bauer - Chip conveyor and parts conveyor belt - Loading magazine FMB Turbo 3-26/3200 / A (built in 2001)

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, turning length: 200 mm, spindle speed (min.): 10,000 rpm, bar diameter: 16 mm, number of slots in tool magazine: 17, TECHNICAL DETAILS Control: CINCOM MITSUBISHI Meldas Axis configuration: 6 (X1 / Z1 / Y1 / C1 / X2 / Z2) Dslqwjvyrp Ejaiwokl Max. bar diameter: 16 mm Max. turning length: 200 mm Spindle data Main spindle speed: 10,000 rpm C-axis indexing: 0.001° Counter spindle diameter: 16 mm Counter spindle speed: 10,000 rpm Tool configuration Total number of tool holders: 17 pieces Construction: Linear tool holder, front attachment, rear machining EQUIPMENT - Integrated fire extinguishing system - Chip conveyor and parts conveyor belt - IEMCA Genius 118/3200 loading magazine (built in 2005)

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter: 20 mm, number of slots in tool magazine: 18, TECHNICAL DETAILS Control: Cincom Mitsubishi Meldas Number of axes: 7 (X1 / Z1 / Y1 / C1 / X2 / Z2 / C2) Max. bar diameter: 20 mm Max. turning length: 205 mm Spindle data Main spindle speed: 10,000 rpm C-axis indexing: 0.001° Counter spindle speed: 10,000 rpm C-axis indexing: 0.001° Tool configuration Total number of tool holders: 18 pieces Dkslqwaievyrnnowel Construction: Linear tool holder, front attachment, rear machining EQUIPMENT - Integrated fire extinguishing system - Chip conveyor and parts conveyor belt - IEMCA BOSS 432r loading magazine